We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
arm length: 3600 mm total column height: ca 5500 mm weight max. in kg: 1000 kg travel of hook: 3000 mm height of hook: ca. 4000 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min - with trolley System is dismantled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used
used
Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used Top Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - is in very good condition and fully functional,- We have verified the function with a test. Electric chain hoist, 1000 kg, GM4 1000.4-2, Abus, used – top condition - Lifting height Chain length 3.25 m Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer maximum the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or al ...
used
ABUS-Einträger-Laufkatze Typ GM3100 / ABUS single-girder trolley type GM3100 Load capacity: 10 t Hakenweg / Lifting height: 10 m Reeving: 4 / 1 Lifting speed/lifting speeds: 0.66/4 m/min Zwei Fahrmotoren / Two travel motors Linear actuator and the contactor box damaged Einsatz auf Ein-Träger-Laufkran Typ ABUS ELK / Use on single-girder overhead traveling crane type ABUS ELK Price ex works, loaded Please do not hesitate to contact us for further information.
used
Abus Jib crane 3 meter / 250 kg
used
Abus Jib crane 3 meter / 500 kg
used
Abus Jib crane 2.5 meter / 250 kg
used
Abus Jib crane 3 meter / 250 kg
used
Load capacity: 2500kg, span: 18,600mm, weight including trolley: 3090kg, operating mode: floor control via push-button pendant, control system: electric, number of crane travel wheels: 4, wheel diameter: 160mm, micro-speed crane travel: 10m/min, crane travel speed: 40m/min, protection class: IP55, brake: disc brake, with crane limit switch, with documentation. An on-site inspection is possible.
used
A single-girder overhead crane is offered. Span/lifting height: approx. 12500mm/6000mm, load capacity: 3200kg, hoist unit: electric wire rope hoist, travel speeds: 2-stage (fine lift/main lift), crane travel: frequency-controlled, control: floor control via pendant pushbutton station. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 13000mm/1100mm/1350mm. Inspection possible by arrangement.
used
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg
used
Crane remote control, radio receiver, receiver, crane radio remote control, radio control system, crane control, radio remote control, radio remote control, radio remote control, radio transmitter -Manufacturer: ABUS, radio remote control with transmitter and receiver for crane remote control -Type: ABURemote AR611 -Scope of delivery: as shown in the pictures, plug/connection cable (without remote control). -Dimensions: 570/510/H180 mm -Weight: 5.5 kg
used
Column jib crane, overhead crane, workstation crane -Manufacturer: KWG, Column jib crane type SSK-B 1.0-2.10, lifting capacity 1000 kg -Base plate: Ø 820 mm -Load capacity: 2500 kg -Chain hoist: ABUS type GM 6 2500.3-2, year of manufacture 2016 -2x lifting speed: 3.0/0.8 m/min -Drive system: yes -Swivel drive: yes -Projection: 5640 mm -Total height: 5060 mm -Hook height: 3830 mm -Swivel range: 360° -Transport dimensions: 1660/5870/H2460 mm -Empty weight: 2011 kg
used
Offered is a column-mounted jib crane: Load capacity: 1000kg, Outreach: 3500mm, Overall height: 4400mm, Column diameter: 355mm, Crane classification: H2 / B3, Hoist unit: electric chain hoist, Slewing gear: electric 0.21rpm / 0.84rpm, System regularly inspected, Inspection by appointment
used
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist with powered chassis -Chain hoist: Abus type GM4- load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.3 m -Electric chassis: Abus EF14 -Carrier width: max. 340 mm -Dimensions: see photo technical drawing -Electrical accessories: connection cable see photos -Transport dimensions: 900/700/H340 mm -Weight: 63 kg
used
Geared motor, electric motor, three-phase motor, electric geared motor -Power: 0.1/0.75 kW -Speed: 12/53 rpm -Voltage: 380 V -Design: B3 -Shaft: Ø 39/50 mm/Ø 35/80 mm -Protection class: IP54/55 -Brake: 1.8 Nm -Quantity: 1 piece -Dimensions: 760/220/H265 mm -Weight: 51 kg
used
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Manufacturer: Abus, 3 pieces cable trolley plastic with polyamide rollers -Type: flat cable -Shipping/Price: complete -Dimensions: 90/70/H75 mm -Weight: 0.1 kg/piece
used
Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 500 kg -Main stroke: 6 m/min -Fine stroke: 1.5 m/min -Chain length: 3 m -Chassis: Abus -Beam width: max. 260 mm -Dimensions: see photo and technical drawing -Transport dimensions: 520/400/H440 mm -Weight: 41 kg
used
Suspension clamp, clamp sleeve, sliding gate sleeve, cable clamp, cable trolley, cable trolley component, cable holder, cable trolley -Cable trolley: Cable trolley with polyamide rollers -Type: Round 10-16 mm -Number: 1 cable trolley available -Dimensions: 80/80/H93 mm -Weight: 0.1 kg
used
Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg
used
Electric chain hoist, crane, indoor crane, assembly crane, hand trolley, push trolley, crane trolley, trolley drive, crane undercarriage, crane undercarriage, trolley -Manufacturer: Abus, electric chain hoist without hand control -Type: GM5 load capacity 1000 kg -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Chain length: 3.5 m -Transport dimensions: 570/390/H330 mm -Weight: 46 kg
used
Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Abus, crane chassis with electric cable winch -Cable pull: Type GM1032FD -Load capacity: 3200 kg -Main stroke/fine stroke: 5/0.7 m/min -Hook path: 6.0 m -Roller spacing: 1400 mm, dimensions see photos -Drive system: Abus -Accessories: Connection cables, without crane operation -Transport dimensions: 1550/1180/H530 mm -Weight: 512 kg
used
An ABUS lightweight portal hall crane is available. Load capacity: 1000kg, dimensions X/Y/Z: 1000mm/4000mm/3280mm. An on-site inspection is possible.
new
weight max. in kg: 250 kg arm length: 4000 mm height: 3425 Unterkante Ausleger total column height: 4.025 mm swivelling range: 270 Grad Total weight, approx.: 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - t ...