other machines for plastic used for sale (394)

M. No.: 02022348 Equipment / Additional information: 50 Hz 140 m³/h 60 hPa

Condition: Very good condition

M. No.: 43954 Equipment / Additional information: Vacuum: 20 mbar Motor Oil: Type SAE 30 Qt.: 6 Ltr.

62 m³/h 60 hPa (mbar) 1,5 kW

M. No.: 070068681 Equipment / Additional information: Hz: 50/60 V250/300 m3/h P 100 hPa (0.1 bar)

Operating hours: 39521 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 110.0 kW Motor speed: 1485 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Operating hours: 70792 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Production speed: 600 cups/min Colours: 8 Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

# HP Jet Fusion 540 3D-Drucker (2019) – MJF-System mit geringer Laufzeit Gebrauchter HP Jet Fusion 540 aus 2019, ursprünglich für R&D-Anwendungen beschafft. Das MJF-System wurde durchschnittlich einmal wöchentlich für Prototypenentwicklung eingesetzt – deutlich unter industrieller Vollauslastung. Entsprechend sehr guter Erhaltungszustand. Technische Eignung: Kleine bis mittlere Losgrößen Funktionsteile und Prototyping Anwendungen mit Anforderungen an Detailgenauigkeit und Maßhaltigkeit Materialeffizienz: Bis zu 80 % des Pulvers wiederverwendbar. Automatische Vermischung von Alt- und Neumaterial erfolgt maschinenseitig, was Materialkosten reduziert. Wartungsstatus: Professionelle Wartung bis Ende 2024 durchgeführt Alle Komponenten original HP (inkl. Druckköpfe) Keine Produktionsaufträge in 2025 Hinweis: Gasdruckfedern der Bauraumtür verschlissen, Austausch erforderlich Lief ...

Complete Britas filter with many spare parts. Off site, available immediately.

M. No.: 00020 Type: Transfer device R3 Equipment / Additional information: Air pressure: min 6 bar The maximum size of the stacking basket is 530x300mm.

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

M. No.: 12088 10 Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: - Stacker - Labeling unit - Stapler

M. No.: 24 Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Voltage is 400V, 3 phase, neutral and ground. 50hz is the frequency.

COVER LABELING SYSTEM SCHLEUTER GU 2 DO WITH 2xSTATIONS FOR PLACING SPOONS M. No.: 12087 Performance: 90 lids per minute (spoon inserted diagonally) Consists of: - Stacker - 2xStations for placing spoons - Labeling unit - Delivery station

COVER LABELING SYSTEM SCHLEUTER GU 2 DU WITH CIRCULAR STATION FOR PLACING SPOONS RNA SRC-N-630-1R M. No.: 12086 Performance: 60 lids per minute Consists of: - Stacker - Circular station for placing spoons - Labeling unit - Stapler

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

M. No.: 560037 // Com.No.: 451.4013 // No. 2620 Colours: 6 // Performance: up to 36’000 cups per hour Equipment / Additional information: Consists off: • Stacker • Printing machine • Cup feeding • Stapler Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed each according to cup size, quality and Raw materials with UV drying: up to 24,000 cups per hour (without positioning) With positioning 12'000/h - 15'000/h depending on cup, format and flap. El connection value with drying: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m3/h Weight: approx. 7,800 kg This machine doesn’t have cup positioning.

Wide slot nozzle, used, according to signage. 1420 mm width, adjustable lip. Adjustable top lip.7-15mm approx Removable Bottom Lip Vertical Choker bar 20mm infeed port. Decals. Used, purchased as seen, without warranty or other warranty. Delivery ex works CH, immediately upon arrival payment.

Calender with stretching line Roll width: 450 mm Diameter of roller: 252 mm Stretching line length: 2500 mm incl. 4 GWK temperature control units, 12 kW heating capacity

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

Inv. Num. : 8808 Type: MS-1.2 Producer: Agropart Created: 2025 Parameters: Volume: 1700 m3 Power: 2400 kg/h Equipment: Large Pocket Tower Fan

Inv. Num. : 8807 Type: PROVITE 2000/120 Producer: Plastmashines Germany Created: 2011 Parameters: Capacity: 400 kg/h Line mounting: Main control panel and monitoring system Mixing/homogenizing tanks Engines Extruder Vacuum pump for degassing Melt filter Closed Water Cooling and Pellet Drying System Unloading silo BOCO PARDUBICE Machines Corner Conveyor Belt Mercedes

Inv. Num. : 6499 Type: TVA-30L Producer: TONVA Created: 2019 Parameters: Switch-on hours: 8000 h Clamping force: 250 kN Injection Molding Stroke: 550 mm Height of the clamping plate: 900 mm Clamping plate width: 950 mm Screw diameter: 80 mm Material: PE Container capacity: 30 l Capacity: 90-100 kg Number of heating zones: 4 pieces Machine length: 4800 mm Machine width: 2200 mm Machine height: 3300 mm Spraying weight: 10000 kg Equipment: MAGUIRE PRS-20 Mill

The main machines in the line: fluid mixer Trusioma hot and cold KO-kneader BUSS Mixing mill Buzuluk 660x2100 mm 4-roll calender Buzuluk 700x1800 mm, inverted "L" tempering and stretching device behind the calender – roller track film thickness profile measuring device winding device

Technical data in image

Tangential Chamber volume 70 l, hydraulic drop door AC motor 320 kW / 380V / 50 Hz, 1483 RPM Year 1987 Previously used for PVC.

The machine is designed for the production of: • Stand-up pouches (Doypack / SUP) with bottom gusset • Three-side seal pouches (3SS) • Flat pouches • Bottom-gusseted pouches with shaped bottom contours Technical Data: • Machine length: 16,900 mm • Machine width: 5,500 mm • Machine passage width: 800 mm • Operating voltage: 400 V, 50 Hz, 3-phase • Control voltage: 24 V DC • Power rating: 125 kW • Current: 235 A • Maximum web feed speed: 3.0 m/s • Maximum output: 150 cycles/min • Maximum output with stacking system: 130 cycles/min • Main operating side: left-hand side in the direction of web travel Production Capabilities • Three-side-sealed pouches • Stand-up pouches • Pouch width: 90–340 mm • Pouch length: min. 80 mm; max. 375 mm (two lanes), max. 750 mm (single lane) • Bottom gusset depth: 20–75 mm • Processable mate ...

Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1992, Consisting of :-, Automatic Elevator Tray-feeder, Cross Conveyor to main Print unit, Universal screw Denester, CUBITRON Corona Pretreatment System with leak-tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, 6 x individually hinged dry-offset Print Heads, Each Print Head consisting of Print cylinder,, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Fountain Rollers water cooled, Ink Washing System on Print Heads, UVITERNO MonoJumbo 6015 6kW on-Mandrel UV-Curing Unit, Dual timming Belt Take-off with Air Assist, Short conveyor to counter Stacker station, Return Elevator for Counted Cup Stacks, Max. Cup dia. 135 mm, Max. Height of Cup ...