milling machines used for sale (2,516)

The conception of the basic machine is characterized by the following features: - horizontal position of the workpiece spindle; vertical position of the milling cutter spindle or of the milling head - The workpiece is picked up between the workpiece headstock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The shift milling head is equipped with automatic angle adjustment (A-axis); the shift slide (Y-axis) moves tagential to the Workpiece diameter - CNC controlled - IBH control - Charging device - a lot of accessories Technical data: - Largest millable module with hobs according to DIN 8002: 4.5 mm - Largest millable module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Max. workpiece nozzle for manual loading: 200 mm - Max. workpiece nozzle for autom ...

Type: C1050 3 Axis Machining Center Year of construction: 2010 Machine type: Machining center Condition: energized, ready for immediate use. Operating hours: approx. 29800h Spindle hours: approx. 9000h Control: iTNC 530. Spindle Rotation Number: 10,000rpm Tool magazine: 30 x-axis (mm) 1,050 Y-axis (mm) 530 z-axis (mm) 630. Spindle/Table Distance (mm) 85-715 Accessories: Documentation Chip conveyor Coolant Setup Tool changer 30 pos. incl. tool holder Linear scales in all axes X / Y / Z 3D Buttons electr. Handwheel . Note: without vice! Auction-ID: A7-47048-24

Year of manufacture approx. 1980, wheel diameter: 406mm, wheel width 420mm, module min.-max.: 0.5-+4.3, milling cutter speeds 49-246 rpm Auction-ID: A1-47017-11

Skip / shavings bucket green 450 l Auction-ID: A7-47048-63

Skip / shavings bucket green 450 l Auction-ID: A7-47048-66

Waelzfraeser with shaft FETTE 2356808 GN461 DIN3968AAA 002.90 2697.1 02 m³ L1 E= 20° DIN3972 I - Stgs. 1°24 pz9.4276 HN PM3 Auction-ID: A1-47017-19

Skip / Shavings bucket blue 275 l Auction-ID: A7-47048-41

Gear hobbing machine – vertical: Make: Pfauter Type: P 630 Year of manufacture: unknown Control type: conventional Technical details: - Condition good - Wheel diameter - max. 630 mm - Wheel width 375 mm - Module - max. 10 - Clamping table 550 mm - Table bore 125 mm - Milling cutter speeds infinitely variable 62 - 390 rpm - Mounting cone MORSE 5 - Axial feeds 0.40 - 6.80 mm/rev - Radial feeds 0.10 - 1.76 mm/rev - Distance between milling spindle and clamping spindle 50 - 425 mm - Tooth count range min. 8 - Milling cutter diameter x width 192 / 215 mm - Milling cutter displacement 200 mm - Main drive motor 7.5 kW - Total power requirement 21 kVa - Machine weight approx. 8.2 t Additional information: Equipment of Machine: - Universal milling head with tangential displacement - Pressure reducing valve for counter holder - Magnetic chip conveyors Auction ...

Year of construction: approx. 1981 Accessories: - Universal milling head, tangential milling head, - Interchangeable wheels - 2 cutting equipment, - little used Auction-ID: A1-47017-85

Kunzmann WF 7 CNC Milling Machine TNC 410 Control Manufacturer: Kunzmann Type: WF 7 Year of Make: 2001 Condition: used, under power Control: Heidenhain TNC 410 X-Weg 610 Y-Path 400 Z-Weg 400 Pick-up SK 40 Speed 1-5000rpm Tilting/swivel table Scope of delivery: – Documents - Approx. 10 tool holders - Without vice Auction-ID: A7-47048-2

Skip / Shavings Bucket green 275 l Auction-ID: A7-47048-56

Workpiece diameter at ratio 1:10 = 300mm, workpiece diameter at ratio 1:1 = 212 mm, number of teeth: 6-200 Auction-ID: A1-47017-39

Hours: 48690 - Spindle hours: 13465 - Max. table load: 1,000kg - Machine weight: 6,000kg - Incl. 117 tool holders – HSK40 - incl. all descriptions - incl. programming manual – Heidenhain - Incl. 2 machine vices - Incl. 1 rotatable vice - Incl. set of collets ER40 - incl. clamping claws, etc. - Incl. pressure load cell for tool measurement Auction-ID: A1-47017-62

Skip / shavings bucket green 450 l Auction-ID: A7-47048-59

MTCut V110 4 Axis Machining Center (2012) Manufacturer: MTCut Type: V110 Year of Make: 2012 Condition: used, very good, in production. Switch-on hours: 14150h Spindle hours: 3710h Control: Itnc 530 Travel range. X x Y x Z = 1100 x 640 x 610mm – 30-fold tool changer ISO 40 – 4th axle Lehmann, 200mm lining with hydr. Workpiece clamping and 350mm face plate. – Internal coolant supply 50bar – Spindle cooling – Measuring Buttons – Dimensions approx. L x W x H 3.2 x 3.2 x 3.1m (Transport height 2.5m). Incl. tools in the tool turret Auction-ID: A7-47048-25

Skip / Shavings Bucket green 275 l Auction-ID: A7-47048-57

AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch Auction-ID: A7-46968-1

Hermle UWF 900 Year of manufacture according to the wiring diagram: 1992 Control: Heidenhain 407 Facilities Handwheel Network connection Speed: 4,000 rpm Technical data X-travel: 600 mm Y-travel: 400 mm Z-travel: 420 mm Tool holder: SK 40 Distance spindle / table: 127 - 567 mm Spindle diameter in front bearing: 55 mm Auction-ID: A1-46872-40

max. wheel diameter: 36 mmgear width: 36 mmmax. module: 10 min. module: total power requirement: 12 kWweight of the machine ca.: 11,2 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 200 mmy-travel: 200 mmz-travel: 400 mmControl: Siemens 840 D total power requirement: 84 kWweight of the machine ca.: 19 tdimensions of the machine ca.: 7,9 x 6 x 2,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Auction-ID: A1-46872-37

Milling machine Mikron WF 32 CH Technical data X-axis: 560 mm Y-axis: 500 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Speed range: 25 - 6,300 rpm Swivel range vertical milling head: +45° Auction-ID: A1-46872-38

Machine type: Universal milling machine Model: X6336A UNUSED - approx working hours around 20 Table size: 1370 x 360 mm Table travel X/Y/Z: 1000 / 320 / 400 mm T-slots: 3 / 18 / 80 mm Max table load: 800 kg Spindle taper (vertical): ISO 40 Spindle taper (horizontal): ISO 50 Spindle quill travel: 127 mm Spindle speed (vertical): 66 – 4540 rpm Spindle speed (horizontal): 60 – 1800 rpm Main motor (vertical): 5 HP Main motor (horizontal): 4 kW Z-axis rapid motor: 1.1 kW Coolant pump motor: 90 W Distance spindle to table (vertical): 155 – 700 mm Distance spindle to table (horizontal): 0 – 400 mm Extension arm travel: 450 mm Extension arm rotation: 360° DRO: 3-axis (SINO) Control: Manual Included accessories: – NT40 milling chuck – Tool kit – Quartz working lamp – Gad tongs – Partial protection Power supply: 380 V / 50 Hz Overall dimensions (L x W x H): 2220 x  ...

Machine type: CNC Vertical Machining Center Manufacturer / Brand: MÜGA Werkzeugmaschinen GmbH Model / Type: R6040 Year of manufacture: 2011 Serial number: ACMM6 004 Control unit: Mitsubishi M70 CNC Country of manufacture: Germany Worktable: Table size: 700 x 410 mm Max. table load: 250 kg Travel ranges: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Spindle type: Direct drive Tool system: Tool magazine capacity: 12 positions Max. tool diameter: 80 mm Max. tool length: 250 mm Feeds: Rapid traverse: up to 28 m/min Measuring systems: Renishaw tool measurement: yes Renishaw workpiece measurement: yes Electrical data: Voltage: 400 V Frequency: 50 Hz Connected load: approx. 19 kW Dimensions and weight: Overall dimensions (L x W x H): approx. 2,654 x 1,700 x 2,400 mm Approx. weight: 3,300 kg Con ...

x-travel: 4000 mmy-travel: 1400 mmz-travel: 1500 mmControl: Heidenhain type: TNC 426 power capacity: 30 kWtransmission ratio: 2 turning speeds: 20-2800 U/minspindle taper ISO: 50 Feed: 4000 mm/minRapid movement: 10000 mm/minsurface area: 4200x960 mmT-slot - width: 22 mmT-slot - distance: 140 mmtable load: 8500 tchip conveyor: total power requirement: 57 KVAweight of the machine ca.: 24 tdimensions of the machine ca.: 9,3x4x3,7 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our w ...

Machine type: CNC Vertical Machining Center Manufacturer: KNUTH Werkzeugmaschinen GmbH Model / Type: VMC 1400 F Year of manufacture: 2015 Serial number: 159472 Worktable: Table size: 1800 x 800 mm Table height: 880 mm T-slots: 18 mm / 6 slots Max. table load: 2000 kg Travels: X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Distance spindle–table: 120 – 830 mm Spindle: Spindle taper: ISO 40 Spindle speed: up to 12,000 rpm Main motor power: 10 kW Feed rates: Rapid traverse (X/Y/Z): 24 m/min Working feed (X/Y/Z): 10 m/min Accuracy: Positioning accuracy: ±0.005 mm Repeatability: 0.005 mm Pneumatics: Air pressure required: 6 bar Air consumption: 400 l/min Electrical data: Installed power: 35 kVA Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight: Footprint: approx. 2980 x 2150 mm Dimensions without / with chip conveyor: approx. 4310 / 5340 x 3150  ...

x-travel: 13500 mmy-travel: 1500 mmz-travel: 5000 mmControl: Heidenhein iTNC530 table-size: 3500x2500x300 mmtable load: 10 ttaper ISO: 50 T-slots: 10x28x250 speed: 2500 m/minbar diameter: 150 mmtool piece magazine with: 60 tool length - max.: 400 mmtool diameter: 125 mmweight of tools max.: 20 kgcoolant tank: 1800 ltotal power requirement: 80 kWweight of the machine ca.: 77 tdimensions of the machine ca.: 21,5x10,65x8,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 330 mmtable surface area: 600 x 200 mmtable load capacity: 200 kgSpindle Speed: 40-2.000 U/min.tool taper: SK40 dimensions: 1200 x 1160 x 1800 mmmachine weight ab.: 800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte AusbaustControl: 67 10.221.661 x-travel: 600 mmy-travel: 700 mmz-travel: 550 mmspindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/minautomatic swivel milling head: tool change unit: 30 Plätze: Infrarot-Taster : : : : 600 L: : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mmT-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table size: 700 × 200 mm Automatic feed on X and Y axes Accessories included (vice, dividing head, milling cutters, drill bushings, etc.) Auction-ID: A7-46789-3