milling machines used for sale (2,529)

x-travel: 800 mmy-travel: 600 mmz-travel: 500 mmControl: Dialog 11 total power requirement: 15 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 3 x 4 x 2,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data Manufacturer: Haas Automation, Inc. Model No.: VF-3YT Serial Number: 1126820 Date of manufacture: 03/2015 Travels: X 1,016 mm / Y 660 mm / Z 635 mm Table: approx. 1,372 × 610 mm, 7 T-slots, 80 mm spacing Spindle holder: 40-taper Power supply: 3-phase, 50/60 Hz, 354-488 V AC Full load current: 40 A Maximum load current: 70 A Control: Haas CNC Control Version: Vertical CNC machining center, YT version with extended Y-travel Configuration Equipment: Tool changer with tool holders, T-slot table, work area with cooling/lubrication device. Remarks - 2026 Buffer battery replaced - Without clamped or surface-mounted tools! Offer refers to the machine only! Note Only operating instructions, but no technical documents available. Information researched to the best of our knowledge and belief. No guarantee is assumed for completeness and correctness. Auction-ID: A1-50373-4

5-axis universal machining centre, Hermle Siemens CNC control (control panel with TFT screen) Round/swivel table integrated Tool magazine available Full protection cab Electronic handwheel Coolant Setup Machine Light CE marking Auction-ID: A1-51071-7

USED HERMLE FWH 630 MECHANICAL MILLING MACHINESerial No.: 3221Table dimensions: 650 x 180 mmStrokes: X=450 - Y=120 - Z=340 mmSpindle speed: 100 to 4480 rpmEquipped with1 SA30cone tilting head Manual and automatic longitudinal movementDimensions and weightPallet Europe 1200x1200xH1800mm - weight 600 kg Auction-ID: A1-50950-25

Auction-ID: A1-50373-16

Main spindle drive power 14 kW Table dimensions (lxw) 1000 x 560 mm Table load 800 kg Number of tool locations in the magazine 20 incl. handwheel Auction-ID: A1-50373-13

Disassemble yourself, Forklift present 2 tons. Auction-ID: A1-47366-135

Table power supply X-Y axis: 8-400 mm/min. Table power supply Z axis : 4-200 mm/min. Eilgang X-Y shaft: 2400 mm/min. Electrical flux Z axis:1200 mm/min. Heidenhain readout with probe Auction-ID: A1-47366-173

Universal milling machine CME (Spain) Model FU-1E Longitudinal displacement : 1000 mm Transverse travel : 300 mm Displacement height : 500 mm Table dimensions : 1300 x 300 mm Machine dimensions W x D x H : 1900 x 1500 x 2200 mm Universal Huron type milling head with ISO 40 holder Includes various tool mounts and milling Auction-ID: A1-47366-73

x-travel: 6.500 mmy-travel: 1.500 mmz-travel: 2.000 mmSize of table plate: 10.000 x 1.100 mmtable weight: 2,5 Kg /m² Kgfeeds: 25.000 mm/minmilling head: 2,5 tool taper: ISO 50 DIN 69871 number of spindle speeds: 20 - 4.000 U/min/rpmtransmission ratio: 2 spindle drive: 30 kWTools changer: 60 fach/toolsInternal cooling system: 20 barchip conveyor: Inkl. kWhandwheel: Heidenhain HR-410 total power requirement: 63 kVAweight of the machine ca.: 34,5 tdimensions of the machine ca.: 11.275 x 4.840 x 4.13 mmMaximum tool diameter with adjacent tool positions occupied: 125 mmMaximum tool diameter with adjacent tool positions free: 250 mmMaximum tool length: 400 mmMaximum tool weight: 20 kgAdditional tank with paper filterOperator platformMotor drives: SIEMENS DIGITALThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchec ...

Horizontal and vertical milling machine; including manual vise jaw width 1550 mm; equipped with Heidenhain VRZ 750 electronic X-, Y-, Z-axis readout; central lubrication; including approximately 20 different SK 40 collet holders, of which with various tools including drills / mills; including 2 tool drawer cabinets with 6 and 8 drawers including various contents; Auction-ID: A1-50476-3

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchec ...

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 830 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine is in very good condition and comes from atraining workshop.Equipment: 3-axis positioning control with active digital display Heidenhain TNC 123- Manual mode: Manual operation and positioning with manual input- Automatic mode: Single-block programme run, programme storage Fixed angle table Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm Coolant equipment Central lubrication Tailstock with counter bearing ManualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mmy-travel: 160 mmz-travel: 290 mmtable surface area: 600 x 210 mmtool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/minfeeds -stepless-: 5 - 500 mm/minrapid traverse: 1,2 m/minspindle motor: 1,5 / 1,9 kWtotal power requirement: 9,5 kVAweight of the machine ca.: 950 kgdimensions of the machine ca.: 2000 x 2200 x 1655 mmThe machine comes from a training center.Equipment:3-axis active digital readout made by HeidenhainInfinitely variable feeds and rapid traverse in all 3 axesFixed angle tableCoolant equipmentTailstock with counter bearingSeveral toolholdersThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5100 mmy-travel: 3500 mmz-travel: 1100 mmdistance between columns: 2700 mmdistance table - lower edge spindle: 200 - 1300 mmtable-size: 5000 x 2600 mmtable load: 17 tspindle motor: 37 /45 kWspindle turning speed range: 6000 U/mintool taper: BT 50 feed in x - axis: 12 mm/minfeed in y - axis: 20 mm/minfeed range Z-direction: 15 mm/minw-axis: mmcontrol: Fanuc 0i-MF total power requirement: - kVAweight of the machine ca.: - tdimensions of the machine ca.: 13 x 8 x 5,5 mPortal milling machine equipped with:- CNC Control FANUC 0i-MF (10.4 LCD)- ATC 60-fold (BT 50)- X/Y axis roller linear guide way, Z axis box way- Auto head storage:-- 90 degree angle milling head- Coolant thru spindle 50bar- X/Y/Z axis linear scales- Spindle oil cooler- Oil skimmer- Air conditioner - Chip conveyor- Ball Screw Cooling X/Y/Z- Air Blast through SpindleThe data for this ad was created with ModulMWS - th ...

Universal milling head - in working condition - can be picked up immediately and put back into work. Auction-ID: A3-46137-16561

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchec ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

HERMIS NR end-milling machine for aluminium profiles, display (showroom) model, reference N002/0961. Heavy-duty type with quick tool change. Has a vice that rotates in degrees and changes positions. Powerful 2 HP motor, automatic spray, two air vices for holding the profiles and a transparent safety guard. Technical specifications: Motor 2 Hp. Max. stroke 410 mm. Speed 3000 rpm. External dimensions 600 x 900 x 1200 mm. Weight approx. 100 kg. Display model, delivered with new machine warranty Auction-ID: A7-50988-14

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

SAC TS 110 wood-burning milling machine with SAMCO Eurouno drive Machine Brand: SAC Model: TS 110 Type: Vertical Shaft Router / Wood Milling Machine Manufacture: Italian Power supply: 380 V three-phase Frequency: 50 Hz Serial number: D31-273 F32 (plate reading) Usage: profiling, molding, rabbet and milling of wooden parts Equipment SAMCO Eurouno automatic trainer Mechanical part feed for smooth work Height- and position-adjustable arm-mounted trainer Two-piece adjustable router guide Large metal table Vertical milling shaft Manual adjustments by handwheels Visible foot controls Chip suction provided for the whole Auction-ID: A3-46137-35255

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V / 50HZ Power: 1200W,0-150RPM. Tap Range: ISO M6-M30 COLLET: M6-8,M10,M12,M14,M16,M18-20,M22,M24,M30 Machine condition: unchecked. Approx. Transpo ...

CME FU 2 CC Universal Milling Machine – Table 1000 × 300 mm Brand: CME Model: FU 2 CC Type: Conventional universal milling machine Origin: Spain – Made in Spain Year of Manufacture: 06/1994 Serial No.: 2383B Total power: 10.6 hp, or about 7.8 kW Table dimensions: 1000 × 300 mm Visible equipment and features Swivel milling head Vertical spindle Large T-slot table Longitudinal, transverse and vertical displacements Manual controls by handwheels Mechanical advances Watering/lubrication system with adjustable hose Work lighting Chip and coolant drip tray Several tool holders and accessories visible on the table Auction-ID: A3-46137-35254

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-200 r/min. TAP RANGE: DIN371: M6,M8, M10; DIN376：M12, M14,M16，M18,M20, M22-24,M27,M30 Machine condition: unchec ...

The tapping machine is servo driven, with intelligent torque protection, to overcome the traditional limitations of lathe, drilling or manual tapping. Boasting advanced mechanical design, with a variety of processes using in-mold casting, the overall stiffness is strong, durable, non-deformable. The high definition touch screen is simple and intuitive. It can perform vertical and horizontal work of complex and heavy parts, locate quickly and process accurately. Continuous speed change, manual, automatic, with three different working modes. Auto mode can effectively control the touch depth, without the operation button, automatic control by depth controller. Fast repeated positioning, tapping speed, high production efficiency. Voltage: 220V, Power:1200W; 1 phase, Speed: 0-90-200 r/min. TAP RANGE: ISO M12,M14,M16,M18-20,M22,M24,M27-30,M33,M36,M42,M48 Machine condition: unchecked. Approx ...

Heavy-duty end-milling machine for aluminium profiles, corresponding to the Hermis NR model. Equipped with a 2 HP motor, rotating vice, quick tool change, automatic spray lubrication, two pneumatic vices and a transparent safety guard. Auction-ID: A7-50988-15