milling machines used for sale (2,385)

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard)Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rateInternal coolant s ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double grippe ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Cross520 mmLongitudinal650 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direc ...

CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgGeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate Spindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rat ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsMaximum load (table centre)800 KgDimensions (L x W x H)3,3 x 2,7 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z800/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1100 x 560 mmWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SysteminlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubrSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872NC- ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineMax. tool length230 mmNumber of tools24 Max. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

x-travel: 600 mmy-travel: 270 mmz-travel: 430 mm: 630 mmtable-size: 1120 x 270 mmspindle turning speed range: 45 - 1660 U/minspindle taper: SK 40 control: konventionell spindle motor: 2,2 kWtotal power requirement: 2,4 KVAweight of the machine ca.: 1,35 tdimensions: 1,8 x 1,4 x 1,8 mMachine equipped with:- Digital display- Machine light- Coolant system- Machine feetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Milling Machine Universal Manufacturer: HERMLE Type: UWF 902 H Year of Make: 1995 Hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Range: Spindle speeds infinitely variable within 3 switching stages: 20 to 6,300 rpm Tool holder: SK40 Tool Changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Tool clamping hydromechanical, clamping force (vertical): 10 000 N Tool clamping hydromechanical, clamping force (horizontal): 12 000 N Spindle diameter on front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D Probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manually / programmatically: 1 to 2000 / 10 000 mm/min. Feed force in all axes (at 80% DC): 6 000 N Rapid traverse in all axes: 10 m / min. Angle table: 900 x 458 mm Universal clamping  ...

CNC Milling Machine Universal Manufacturer: HERMLE Type: UWF 902 S Year of Make: 1995 Hours: 65 071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Range: Spindle speeds infinitely variable within 3 switching stages: 20 to 6,300 rpm Tool holder: SK40 Tool Changer Tool holder, horizontal and vertical: ISO 40 DIN 2079 Tool clamping hydromechanical, clamping force (vertical): 10 000 N Tool clamping hydromechanical, clamping force (horizontal): 12 000 N Spindle diameter on front bearing, horizontal / vertical: 75 / 55 mm Quill Ø 100 mm extendable vertical: 75 mm M & H 3D Probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10 000 mm/min. Feed force in all axes (at 80% DC): 6 000 N Rapid traverse in all axes: 10 m / min. Angle table: 900 x 458 mm Table wei ...

Tool diameter: mmsanding disc diameter: mmMotor output: 3 kWtotal power requirement: 3 kwWeight: 1.400 kgOverall size: mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mmy-travel: 340 mmz-travel: 460 mmControl: Fanuc total power requirement: kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sell our old vertical milling machining center as a spare parts dispenser, unfortunately I can not say what the machine has exactly, I only know that the control unit is defective

Magnetic swivel table as shown in the pictures. Further information on request

x-travel: 2.600 mmy-travel: 700 mmz-travel: 700 mmcontrol: iTNC 530 HeidenhainMain spindle:: turning speed range - main spindle: 20 - 18.000 min/-1power capacity - main spindel: 35 / 25 kWtool taper: SK 40 work table:: table surface area: 2.900 x 700 mmmax. table load: 2.150 kgtool magazin:: number of toolpositions: 30 pos.tool taper: SK 40 max. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6,0 kgfeeds:: rapid traverse ( X / Y / Z ): 40 m/minfeed speeds: max. 40.000 mm/minfeed power: max. 8 kNtotal power requirement: 54 kVAweight of the machine ca.: 14,4 tdimensions of the machine ca.: 8,0 x 5,6 x 2,8 mChip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setting: Blum - LaserCo ...

x-travel: 1000 mmy-travel: 500 mmz-travel: 700 mmtable surface area: 1250 x 700 mmspindle taper ISO: 50 spindle turning speed range: 20 - 3200 U/minquill stroke: 100 mmsemi-automatic operated: Phillips 432 Number of working hours: 62.340 hmain drive motor: 22 kWtotal power requirement: 27 KVAweight of the machine ca.: 7,7 tbase area: 3,8 x 4,1 x 2,4 mmaccessories:: hydr. Schraubstock X axis, longitudinal 1,000 mmY axis, vertical 500 mmZ axis, cross 700 mmMin./max. distance from vertical spindle to table top 138 / 600 mmOverhang max. approx. 800 mmSpindle taper SK 50 with inner coolingSpindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpmFeed motion YXZ 1 - 3,000 mm/minRapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min.Rotary axis as 4th axiswith housing of the working areaThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 406 mmgear width: 420 mmmax. module: 4,3 min. module: 0,5 hob turning speeds: 49 - 246 U/mintable bore diameter: 80 mmtotal power requirement: 7 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 2,8 x 1,6 x 2,2 mYear of construction approx. 1980The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece diameter: 500 mmthreading length: 1250 mmmax. module: 10 min. module: 1 workpiece dia. over saddle: 250 mmspindle bore of workspindle: 102 mmquill stroke: 100 mmworkpiece turning speeds: 0,0032 - 2,6 U/minfeeds - rolls: 0,027 - 5,66 mm/WUfeeds - longitudinal: 0,3 - 198 mm/minmain drive: 4 kWswivel angle for work spindle: 90/120 °diameter of hob: 150 mmmilling width: 100 mmhob turning speeds: 45 - 560/900 U/mintotal power requirement: 9,5 kWweight of the machine ca.: 4,2 tMachine equiped with:- Heavy Duty Hob Head ApFw- change gears- Milling Head ApFF- Single Indexing Device ETE- Bush Rest- Coolant TankThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 1800x700 mmT-slot - distance: 120 mmTable load: 3000 kgspindle taper ISO: 50 power capacity: 22/30 kWspindle turning speed range: 60-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mmy-travel: 1000 mmz-travel: 1000 mmControl: Heidenhain type: TNC 430 : spindle turning speed range: 15-1450 U/minTable area: 2300x1200 mmSpindle: 200 mmspindle stroke: 200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNr 3762Maschine wurde überholtmachine is retofitThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2.200 mmy-travel: 560 mmz-travel: 720 mmcontrol: iTNC 530 Heidenhainturning speed range - milling: 20 ~ 12.000 U/minpower capacity - milling spindle: 35 / 25 kWtool taper: SK 40 tool piece magazine with: 100 pos.table surface area: 2.600 x 600 mmrapid traverse X-axis: 100 m/minrapid traverse Y-axis: 50 m/minrapid traverse Z-axis: 50 m/minmax. tool diameter: 80 mmmax. tool-dia with free toolbox: 130 mmmax. tool length: 300 mmmax. tool weight: 6 kgmax. table load: 2.200 kgtotal power requirement: kWweight of the machine ca.: 12 tdimensions of the machine ca.: 7,0 x 4,2 x 2,7 mChip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mmSeperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 barTravelling column milling machineDECKEL MAHO - DMF 220 Linear- new spindle installed (April 2024)- incl. 4th Axis 560mm and  ...

: 600 mm: 500 mm: 400 mm: 1000x500 mm: 1200x250 mm: 40-3200 U/min: DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm: 480 mm: 550 mm: 1524x380 mm: SK 40 : 127 mm: 105 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 560 mm: 320 mm: 400 mm: 950x450 mm: 1050x320 mm: 25-3600 U/min: SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1700 mmy-travel: 800 mmz-travel: 890 mmtable surface area: 2000 x 630 mmspindle taper: SK 50 spindle turning speed range: 35 - 3000 U/minspindle drive: 26 kWfeeds longditudinal/cross/vertical: 6 - 5000 mm/minrapid traverse: 15 m/mintable load: max. 6000 kgcontrol: HEIDENHAIN control: TNC 360 total power requirement: 45 kVAweight of the machine ca.: 13 tdimensions of machine L x W x H: 5,2 x 2,78 x 2,95 mAccessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mmy-travel: 560 mmz-travel: 510 mmtable-size: 1200 x 560 mmspindle taper ISO: 50 turning speed range: 15 - 4000 U/minfeeds longditudinal/cross/vertical: 1 - 3000 mm/minrapid motion -longitudinal/cross/vertical: 10 m/mindistance spindle nose and table: 150 - 660 mmdistance spindle center to column: max. 650 mmtable load: max . 1 tno. of tools in magazin: 24 tool diameter: 110 mmworkpiece length: 350 mmweight of tools max.: 15 kgspindle drive: 7,5 kWcontrol: FANUC 11 MA total power requirement: 13 kWweight of the machine ca.: 9,3 tdimensions of machine L x W x H: 3,55 x 2,64 x 2,68 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mmy-travel: 400 mmz-travel: 400 mmtable surface area: 800 x 400 mmspindle taper: SK 40 control: HEIDENHAIN TNC 310 spindle turning speed range: 10 - 3150 U/minspindle drive: 5,5 kWfeed - longitudinal/cross: 1 - 5000 mm/minfeeds vertical: 0,5 - 2500 mm/minrapid traverse: 6 / 6 / 3 m/mintotal power requirement: 10 kVAweight of the machine ca.: 2,5 tdimensions of machine L x W x H: 2,16 x 1,70 x 2,0 mAccessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mmy-travel: 940 mmz-travel: 1000 mmtable surface area: 3250 x 800 mmspindle taper: SK 50 spindle turning speed range: 40 - 1800 U/minfeeds longditudinal/cross/vertical: 0 - 2250 mm/minrapid traverse: 6 m/mintable load: 4500 kgcontrol: HEIDENHAIN, TNC 355 total power requirement: kWweight of the machine ca.: 10,3 tdimensions of machine L x W x H: 4,50 x 2,69 x 2,71 mAccessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

GeneralIntegrated Mill Turn Center; Control: Control F31iB5 with CELOS CharacteristicsSwing- Ø, max.700 mmMilling spindle upper side1 Bar diametre80 mmSpeed max.4000 rpmMax. Turning Length1530 mmMax machining diameter670 mmDrive power tool spindle5,5/3,7 kWDrive power milling spindle28/23 kWDrive power main spindle18,5/15 kWMovements X / Z200/1542 mmLower Turret10 PositionsNumber of Toolmagazine positions38 Speed max.12000 rpmSlewability of B-Axis±120 degreeMovements X / Z / Y675/1562/300 (±150) mmWeight approx.18500 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p(Left Spindle) through-spindle hole dia. 91 mm, 4,000min-1 (STD)(Left Spindle) Through-spindle H ...