milling machines used for sale (2,519)

Fanuc ROBODRILL ALFA T10 B, Built in 1995 Revolutions 8000 rpm Picture Sk 30 Control Fanuc 16 M Tool changer 10-fold

Argo A51, built in 2008 Travel Distances X 510 mm, Y 350 mm, Z 300 mm Table: approx. 600 × 300 mm Control: FANUC Dimensions 2,610 × 1,720 × 2,460 mm. Weight: ≈ 2,700 kg.

Topper TMV-510 Built in 2008. Travel distances of X = 510 mm, Y = 360 mm, Z = 300 mm. Table surface 600 × 360 mm Controllers Fanuc 0i-MF

gebr. V. Processing Center, Fabr. Homa, Type Ecocenter V350 x-travel 450 mm y-travel 350 mm z-travel 350 mm Table size 650 x 350 mm Speed 6000 rpm Control Fanuc 0M

Heckert CWK 400 Built in 1995 Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool Changer Rotary table 400 x 500 mm, Conveyor Weight 12.5 t.

OKUMA Euro Center V50, built in 2004 Control: OSP-10M Travel: X-1020 Y-510 Z-525 Table load 680kg Clamping area 1200x510 Tool changer 20-fold

gebr. Milling machine, Fabr. Stanko Type 6175 Travel X/Y/Z: 320/210/300 mm Spindle speed: 50 - 2040 rpm Feed speed: 13 - 395 mm/min Drive power: 1.5 kW Tool holder: 4 MK Groove width: 14 mm Number of grooves: 3 pieces Groove spacing: 50 mm

Tool milling machine Manufacturer: INFRATIREA, Type: FUS-32, built in 1988 Specifications: Table 950 x 450 mm Travel X / Y / Z: 500 / 320 / 400 mm Spindle speeds 25 - 2000 rpm with digital display

CNC Mill, Cover, FP4-AT, 3 Axis X560/Y500/Z450 Speed range 40-4000 min-1 Control Contur-3, Mounting SK-40, weight approx. 3.4 t.

1 gebr. CNC Milling Machine, Fabr. TOS, Type FNG 63 Travel: X 800 mm Y 500 mm Z 630 mm Heidenhain Control

Univ. Tool Milling Machine DECKEL Type FP 1 Masch. No. 37101 Year of construction approx. 1969 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal: 60-1200 rpm. 12 steps Motor power 1.0 and 1.5 kW pole-switchable Mains connection 380 volts, 50 Hz - Spindle speed over 2 motor speeds and 6 gear stages - Feed in the X and Z axes - Coolant device with mechanical pump in the machine foot - Quill shift on the vertical milling head 60 mm - Adjacent control cabinet Space requirements L x W x H 1000 x 900 x 1750 mm Weight 690 kg good condition Accessories: -Collets -Roundtable -Vice - Counter holder H. milling

gebr. Engraving Milling Machine, Lid GK12 with Accessories

Heidenhain TNC 426/430 Year of construction 1998 Total Spindle Hours 17000 Travels X/Y/Z axis 500/380/380 mm Tool changer for 24 tools Tool holder SK40 Spindle speed 15000 rpm NC swivel rotary table 500 x 380 mm Feed speed max. 20000 mm/min Rapid traverse 30m/min Weight approx. 4000 kg Coolant Setup The machine is in very good condition. Milling spindle and axes run smoothly and very precisely.

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: ...

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

Key data: 600 mm, 400 mm, 420 mm

Hermle UWF 900 Universal CNC Milling Machine BAZ Year of Make: 1996 Machine number: 11410 Machine weight: 2,900 kg Availability: By arrangement. Machine is still energized and in perfect condition.


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

2 x milling machines Kunzmann WF 650 BJ 2005

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking m ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kW ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN ...

A Lasercomb CNC high-speed die milling machine is available. Travel X/Y: 1070mm/1070mm, number of spindles: 4, spindle speed: 50000rpm, continuous power: 180W. Dimensions X/Y: approx. 2100mm/1900mm, weight: approx. 430kg. Documentation available. An on-site inspection is possible.

bore capacity in steel (diameter): 13,0 mmx-travel: 300 mmy-travel: 130 mmturning speeds: 100 - 2500 U/minthroat: 165 mmspindle taper MT: 3 MKtable-size: 490 x 120 mmdiameter of hob: 30,0 mmmotor: 230 Volttotal power requirement: 0,75 kWweight of the machine ca.: 50 kg.dimensions of the machine ca.: 520x500x740 mmScope of delivery:- Key chuck 1 - 13 mm / B 16- Drill chuck arbor MK 3 / B 16- tightening spindle M 12- Height-adjustable protective cover- operating key The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0,75 kWdegree: 45° Gradturning speeds: 10.000 U/minmilling height: 4,0 mmmotor: 400 Voltrange L-W-H: 560 x 300 x 450 mmweight: 44,0 kgDescription :- Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched- Ideally suited for deburring and chamfering (visible edges) of various- Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc.- Ideal for producing visible edges with excellent surface quality- High dead weight for vibration-free workscope of delivery- Slidable guide rail 500 mm- milling head- HM indexable inserts- Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 350 mmz-travel: 400 mmtool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/minfeeds: 0 - 2000 mm/minquill stroke: 60,0 mmtable-size: 650 x 350 mmT-slots: 14 H7 Control: TNC 124 engine output: 5,5 kWweight: 1800 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros ()Furnishing :- Universal tool milling machine- HEIDENHAIN pattern control TNC 124- The control panel can be swiveled to the right of the machine- hydraulic tool changer (DIN 69872)- Vertical milling head - SK 40- X-axis feed .. 0 - 2000 mm / min- Y-axis feed .. 0 - 2000 mm / min- Feed Z-axis .. 0 - 2000 mm / min- Central lubrication, electrical- coolant device- Chip tray- Operating instructions for machine + control Special accessories included:- hydraulic machine vice- many tool holders- HEIDENHAIN HR 410 electronic handwheel The data for this ad was created with Mod ...

x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: SK 30 / DIN 2080 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1.3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mmy-travel: 250 mmz-travel: 400 mmtool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/minfeeds: 0 - 10.000 mm/minquill stroke: 90.0 mmtable-size: 600 x 320 mmT-slots: 5 x 14 x 63 mmControl: TNC 410 CA spindle: ein ~ 126 Std.engine output: 11.0 kWweight: 1300 kgdimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on)Furnishing :- MACMOM / INAS CNC universal milling and drilling machine- HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel- Pivoting control panel, to the right of the machine- hydraulic tool clamping (tie bolt DIN69872-A)- Vertical milling head rotating on both sides - ISO 40- Vertical speed ...

x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtaper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mmT-slots: 6 Stk.turning speeds: 50 - 2500 U/minfeed stepless: 4-1600/4-1000 mm/minvoltage: 400 Vtotal power requirement: 5.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition ()Furnishing :- robust universal milling machine- swiveling control panel, right front- rotatable universal milling head (re/li = 90°) with hydraulic tool clamping- manual milling spindle feed, with locking- swiveling milling spindle protection- Stable T-slot clamping/angle table- Axis feeds with rapid traverse- Central lubrication unit- Control cabinet, installed on the left Digital display - without function Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9131203The data for this ad was crea ...

x-travel: 280 / 300 mmy-travel: 250 / 270 mmz-travel: 300 / 310 mmturning speeds: 45 - 2240 U/minturning speeds: 18 Stufenspindle taper ISO: 40 quill stroke: 60.0 mmtable:: 670 x 320 mmtable load: 150 kgfeed range: 12.5 - 630 mm/minfeed: 18 Stufenrapid traverse: 1.200 mm/minworkpiece weight: max. 150 kgT-slots: 5x 12 x 63 mmtotal power requirement: 1.6 kWweight of the machine ca.: 1100 kgrange L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon requestFeatures:- Robust electric-driven universal milling machine- ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button- Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions- Pivoting milling spindle guard- Coolant system- Lower chip tray- Vertical milling head with quill adjustment Milling head rotation 90° Tool holder ISO / DIN 40 / 2080- Fixed ...

x-travel: 1000 mmy-travel: 360 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1370 x 320 mmfeed:: H 80 - 830 / V 23-625 mm/min.turning speeds: H 35 - 1500 / V 45 - 1660 U/mindistance spindle /table: H 30 - 430 / V 210-610 mmrapid traverse: Z Achse 750 mm/minthroat: 305 - 805 mmT-slots: 3 x 14.0 mmtable - swivable +/-: -45 / +45 °workpiece weight: max. 300 kgcoolant pump: 25.0 L/min.total power requirement: 7.6 kWweight of the machine ca.: 1540 kgrange L-W-H: 1840 x 1830 x 2050 mm- Large rectangular guide in y and z axes- ensure increased stability- 8x automatic feeds and rapid traverse in all axes- driven by servo motor- Universal milling head system Huron, adjustable to all angular positions- Swiveling control panel with ergonomically placed switches- Heavy machine stand made of gray cast iron for vibration-free work- Very smooth running thanks to ground gears running in an oil bat ...