machines and plants for process engineering used for sale (7,644)

Technical Data: Distillation vessel volume: 150 liters Constant fill volume: 100 liters Maximum operating temperature: 200 °C Absolute vacuum: up to 50 mbar Heating power: 9 kW Cooling water consumption: 0.8 m³/h Distillation output: 30-60 L/h Features: • Cylindrical, vacuum-tight vessel with flanged lid • Heating via heating floor or heating jacket (steam at 10 bar, 185 °C max) • Water-cooled stainless steel condenser • Rotating scraper agitator system to remove deposits and ensure heat transfer • Residue discharge valve (manually or pneumatically operated) • Sight glass and explosion-proof lamp for observation of the process

Operating pressure: 13bar, volume flow: 17.07m³/min, motor power: 90kW, motor speed: 3480rpm, weight: approx. 1750kg. The frequency converter of the machine is defective. An on-site inspection is possible.

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Nicotra Gebhardt P2M Process Air Fan Housing fan with direct drive without coupling – single-sided suction Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Individual solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Spiral Molded Housing Robust welded construction Housing positions in 90° steps Individual installation position Radial impeller Wheel diameter 500 mm Backward curved blades Welded Dust repellent Materials: Steel coated, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and dust Manufacturer: Nicotra Gebhardt Volume flow: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C N: 1460 1/min n max: 2511 1/min PW: 3.10 kW Ins/Eff= B/total L (13/15): 61/64  ...

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Colortronic Dry-Flex M400 Granulate Dryer For sale is a used Dry-Flex M400 granulate dryer from the manufacturer Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (D) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating capacity: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 Granulate Dryer and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.

Various plate, bag and candle filters from lafonte Models: MIX 7D2 EVT12 GAM MIX 15D2 EVT20 GAM MIX 15C2 EVT20CER GAE

Mefiag Satilum filter system Long Life Unit 3x with control system

8x lafonte plate filter BIG 36D3 KPP951 TX

IKS Cooling System

ProMinent VAMC07026PVT00PM00

ProMinent ALPC1008PVT20P30

8x ProMinent dosing pumps DLTA1020PVT2000UA1030DE0

Control screening machine BÜHLER MKZF 40/90 D 11 kW Very good condition

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.

Weiss Climate Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless Steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 litres Outer housing Material: double-coated zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paintwork: light grey (RAL 9002) Door, double-leafed: hinged left and right Equipment: Feed-through in floor and ceiling: 2 pieces each, NW 100 mm, for inserting the pulsating tables Feed-through in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measurement and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Opera ...

IKS cooling unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. pressure: 27.6 bar Temp. min/max: -10/55C Cooling capacity: 20.4 kW Compressor input power: 5.6 kW Temperature constancy: 2 K Tank capacity: 110 litres Water connections: 1 1/4" AG inches Cooling air volume: 5370 m3/h Mains connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: LxWxH 980 x 800 x 1785 mm More items - new and used - can be found in our shop! International shipping costs on request!

Machine name: Polymer dosing system Manufacturer: PRO-ENTEC Type: RM2 Year of Make: 1998 Conveying / Dosing of: Liquid Polymer Capacity: 2 - 30 L/h Control: Yes Dimensions: L 1,150 x W 600 x H 1,600 mm Curb weight: 100 kg Technical documentation: No Condition: Used Price: On request

Rietschle Vacuum Pump TYPE: CEV3709-S4 (11) Built in 1993 Motor power 0.75 kW 2850 rpm 50Hz IP54

A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible.

A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible.

Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request

Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm

Plunger Pump, High Pressure Pump, Homogenizer, Plumger Piston Pump, Plunger Piston Pump Manufacturer: WOMA Apparatebau GmbH Type: 753.50 max pressure 150 bar Flow rate approx. 175 l/min Engine Power: 55 kW 1500 rpm 380/660 volts 50 Hz Dimensions approx. 1800 x 1000 x 750 mm

For sale is a V-cooler of the brand Güntner Year of construction 2020 L= 4700 mm W= 1500 mm H= 1900 mm G= approx. 1.6 to Power 350 KW Admission 86° Outlet 72° Volume flow 23 m³ / h Price € 14,500 + VAT little run Very good condition

Industrial robots, almost unused --> incl. control: Siemens Simatic HMI --> control panel with touch screen display; Manufacturer : Fruitcore Robotics GmbH Type : Horst 900 Year of construction : 2021 Number of axes : 6 Maximum load capacity : 5 kg (nominal load 3kg) Reach : 905 mm Spare parts : Spare parts procurement is possible.