machines and plants for process engineering used for sale (7,644)

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request

Used rotor unit without frame and motors (spare rotor) Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Stated price of 8000,-€ in unrepaired condition, 15.500,-€ net in overhauled condition ---------------------------------------------------------------------- ----------------------------------- used rotor unit without frame and motors (spare rotating) Rotating speed: 3500 rpm Bowl inner diameter: 448 mm Bowl wall thickness: 11 mm Material: Steel Max. density: 1.50 kg / dm³ stated price of 8000,-€ in unrepaired condition, 15500,-€ in repaired condition

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition

Homogenizing Mixer CML125 Key data: • SYMEX CML125 • Working volume: 125 • Armature agitator with scrapers and breakers 19 ... 82 min-1 • Homogenizer with right/left run (homogenizing/pumping mode) 5 - 21 m/s • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.

Vakumix continuous homogenizer in the design and mobile on castors. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 kW: 30 Suction device DN25 front side for sucking in liquids. NEW: Control, converter, all seals incl. mechanical seal. The continuous homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Dissolver ATP Dispermill LD 50 Explosion-proof design Power 0.37 kW Speed range 930-8400 1/min Toothed pulley 50 mm Very good condition, straight from the production

Dissolver Pendraulik Disperlux LD 50 Explosion-proof design Power 0.37 kW Speed range 930-9400 1/min Toothed pulley 50 mm

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Bead mill VMA Getzmann Dispermat SL50-C Power 3 kW Speed range 0-6000 1/min Grinding chamber volume 0.5 l Bar temperature sensor Very good condition, straight from production

Dissolver Drais RSV 19.1 Power 14.5 kW Speed range 0-1850 1/min Complete with control cabinet Very good ready-to-use condition, straight from production

Radial duct fan for easy, direct installation in the sewer system. Housing made of galvanized sheet steel. Rated Voltage: 400V Frequency: 50Hz Phase(s): 3~ Power consumption: 1,246W Current: 2.25A Speed: 1,315 r.p.m. Volume flow: max. ; 3,168; m³/h Minimum pressure, static: 250Pa Max. conveying device temperature: max. 40°C Max. conveying device temperature at speed control: 40°C Sound pressure level in 3m: 57dB(A) Degree of protection, motor: IP44 Weight: 31 kg Rectangular channel connection, height at inlet & outlet: 300 x 600mm

Offer 20244 Granulate dryers Technical data approx.: - Filling quantity approx. 250 L - Granulate feed via suction device - Heating capacity 10 kW - Total drive power 10.5 kW -Thermostat - Compressed air connection 6 - 8 bar - Mobile version - Space requirements W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Lister KL5L air-cooled chiller Manufacturer: Lister Type KL 5 L kW: 3.25 Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions: (WxDxH) 940 x 560 x 1100 mm More items - new and used - can be found in our shop! International shipping costs on request!

Heraeus Minifuge RF Analog temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 uses, max. speed 6000 rpm Brake function Automatic imbalance shutdown Automatic lid locking during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg More items - new and used - can be found in our shop! International shipping costs on request!

Hettich 22R Refrigerated Centrifuge Speed: n = 18,000 rpm / RCF 31,514 Temperature in the spin chamber: infinitely variable from -20°C to +40°C Running time 1-99 min, ∞ (continuous run), PULSE button (for short run in seconds) Dimensions (HxWxD): 278 x 333 x 620 mm Voltage: 220 - 240 Weight approx: 36 kg incl. rotor 1153 30x3 g Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Aluminum Tank Alutank Aluminum Tank 2200 Litter Aluminum Tank Diameter: 160 cm Height tank: 130 cm Total height: 200 cm approx. 2200 litres More items - new and used - can be found in our shop! International shipping costs on request!.

Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.