machines and plants for process engineering used for sale (7,688)

2 used Andritz chamber filter presses, built in 2014, plate size 1500 × 2000 mm Technical data: Manufacturer: Andritz Year of Make: 2014 Figurine no.: S/E/1520/C/R/W/D/K Panel size: 1500 × 2000 mm Number of plates: 97 per press Condition: used If required, incl. accessories: - New filter cloths - Filling pumps (Netzsch, partly new) - High-pressure pump for cleaning - Andritz screw conveyors We will be happy to provide further details and an overview of the spare parts on request.

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Universal Components Mixer in Stainless Steel, Type EM 300, Fabr. MTI Detmold Germany, built in 1997

Rotary drum solids separator, drum screen, rotary screen. Working principle: Wastewater flows into the rotating sieve drum, water passes through the sieve opening. Solids remain inside and are transported away Application: Mechanical pre-treatment of liquids (wastewater) 2 units available Price per piece: 4.900,00 €Net

Rotary drum solids separator, drum screen, rotary screen. Working principle: Wastewater flows into the rotating sieve drum, water passes through the sieve opening. Solids remain inside and are transported away Application: Mechanical pre-treatment of liquids (wastewater) 2 units available Price per piece: 4.900,00 €Net

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

Huber WAP (wash press) fully functional incl. control. Material: Stainless steel housing Screw press with perforated screen basket. Application: Treatment of screenings / screenings. Dewatering and volume reduction. Area of application: Municipal sewage treatment plants, industrial sewage treatment plants,

At its core, the Marty 881 is a 2-component dosing and mixing system for reactive resins (e.g. polyurethane): It keeps the two components (typically polyol + isocyanate) available in separate circuits, conditions them (e.g. temperature/degassing depending on the design) and doses them in the set mixing ratio via metering/dosing pumps. The components are then brought together in the mixing head and discharged as a precisely defined quantity into the mould/mould or into a process (e.g. vacuum casting/impregnation). The 881 is particularly used for smaller mixing quantities; for example, very small minimum quantities and conveying ranges of up to about 1 kg/min are mentioned as a guideline.

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Two identical insulated double-jacket cooling tanks Möschle are available. Vessel volume: 15500l, jacket volume: 60l, max. jacket pressure: 3bar, max. medium temperature: 50°C, min. medium temperature vessel/jacket: 18°C/10°C, diameter: 2650mm, overall height: 4800mm. Including permanently installed agitators. An on-site inspection is possible.

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request

Used rotor unit without frame and motors (spare rotor) Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Stated price of 8000,-€ in unrepaired condition, 15.500,-€ net in overhauled condition ---------------------------------------------------------------------- ----------------------------------- used rotor unit without frame and motors (spare rotating) Rotating speed: 3500 rpm Bowl inner diameter: 448 mm Bowl wall thickness: 11 mm Material: Steel Max. density: 1.50 kg / dm³ stated price of 8000,-€ in unrepaired condition, 15500,-€ in repaired condition

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition

Equipment: Heatable/coolable,Condition: used,Volume: 72,500,Design: horizontal,Stand shape: feet,Number of feet: 12,Heating/cooling (filter bar): available,Temperature control cylinder: rectangular half-tube coil,Diameter inside: 2,800,Cylindrical length: 12000,Total length: 13,100,Type plate: No,Equipment: Spray head,Remarks: 6 reinforcement rings Fe with 2 feet each (Attention: note tank diameter lower than tank feet when setting up) Manhole in the front floor,last Intended use: Brewery,Material in contact with the product: V2A 1.4301 (AISI304),Material temperature control system: V2A 1.4301

Equipment: Insulation, agitator,Manufacturer: Ahlborn,Condition: used,Volume: 60,000,Bottom floor: flat bottom with slope,Top floor: conical bottom,Design: upright,Insulation: available,Diameter inside: 3,500,Diameter outside: 3,610,Cylindrical height: 6,500,Total height: 7,200,Manhole / dome: in cylinder,Type plate: No,Equipment: Ventilation/venting, spray head, crane eyes,Outlet: present,Outlet : 80,Remarks: Container feet are spacers for the substructure/foundation. Inside small repair points,last use: foodstuffs,material in contact with the product: V2A 1.4301

Equipment: Insulation, agitator,Condition: used,Volume: 60,000,Bottoms: conical bottom,Design: upright,Standing form: Stand frame,Insulation: available,Diameter inside: 3,700,Diameter outside: 3,880,Total height: 9,200,Manhole / dome: in cylinder,Nameplate: No,Equipment: Ventilation/venting, spray head, crane eyelets,Last use: Foodstuff,Material in contact with the product: V2A 1.4301 (AISI304),Agitator: Beam stirrer,Bottom bearing: Yes,Current interferer: No,Agitator arrangement: eccentric in the topsoil,floor bearing: no,power interferer: no

Homogenizing Mixer CML50 Key data: • SYMEX CML50 • Working volume: 50 • Anchor agitator with scrapers and breaker 13 ... 111 min-1 • Homogenizer Co Twister • • Pump - Rotor Speed: 300.. 9360 min-1 • • Shear - Rotor Speed: - 9360 .. 9360 min-1 • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.2m³/h at min. 2 bar • Compressed air: approx. 1000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.

Homogenizing Mixer CML125 Key data: • SYMEX CML125 • Working volume: 125 • Armature agitator with scrapers and breakers 19 ... 82 min-1 • Homogenizer with right/left run (homogenizing/pumping mode) 5 - 21 m/s • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1.5 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.3m³/h at min. 2 bar • Compressed air: approx. 2000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.

Vakumix continuous homogenizer in the design and mobile on castors. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 kW: 30 Suction device DN25 front side for sucking in liquids. NEW: Control, converter, all seals incl. mechanical seal. The continuous homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Dissolver ATP Dispermill LD 50 Explosion-proof design Power 0.37 kW Speed range 930-8400 1/min Toothed pulley 50 mm Very good condition, straight from the production

Dissolver Pendraulik Disperlux LD 50 Explosion-proof design Power 0.37 kW Speed range 930-9400 1/min Toothed pulley 50 mm

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Bead mill VMA Getzmann Dispermat SL50-C Power 3 kW Speed range 0-6000 1/min Grinding chamber volume 0.5 l Bar temperature sensor Very good condition, straight from production

Dissolver VMA Getzmann Dispermat AE - 4C Power 2.2 kW Speed range 0-10000 1/min Toothed pulley 100 mm Accessories on request Complete with control cabinet Very good condition, straight from production

Dissolver Drais RSV 19.1 Power 14.5 kW Speed range 0-1850 1/min Complete with control cabinet Very good ready-to-use condition, straight from production

Lahntechnik KES 04F1-01 Slide-in cooler Manufacturer: Lahntechnik Description: 154688 Type: KES 04 F1-01 Nominal voltage: 400 V Nominal current consumption: 9.68 A Nominal power consumption: 4.55 kW Control voltage: 24 V DC Protection class: IP 54 Nominal cooling capacity: 4.0 kW Refrigerant: R134a Max operating pressure refrigerant circuit: 25 bar Weight: 100 kg Year of Make: 2015 Grundfoss CM5-3 A Multistage Centrifugal Pump Danfoss MTZ28 JE4AVE Compressor Compressor Swep B10THx20/1P-SC-M Plate Heat Exchanger More items - new and used - can be found in our shop! International shipping costs on request!

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.