machines and plants for process engineering used for sale (7,688)

Nicotra Gebhardt P2M Process Air Fan Housing fan with direct drive without coupling – single-sided suction Robust industrial designs Durable, easy to maintain High efficiency, quiet operation Individual solutions at a standard price Certified and assured quality according to ISO 9001 Technical data measured according to DIN 24163 Accuracy class 2 according to DIN 24166 Spiral Molded Housing Robust welded construction Housing positions in 90° steps Individual installation position Radial impeller Wheel diameter 500 mm Backward curved blades Welded Dust repellent Materials: Steel coated, hot-dip galvanized, stainless steel 1.4307 ATEX: Category 2 and 3; Gas and dust Manufacturer: Nicotra Gebhardt Volume flow: 8000 m³/h dPt: 1070 Pa Density: 1.2 kg/m³ Tmax: 80 °C N: 1460 1/min n max: 2511 1/min PW: 3.10 kW Ins/Eff= B/total L (13/15): 61/64  ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 351 P5-offAD bypass MTA S.p.A. TAEevo Tech 351 P5-offAD Bypass are air-cooled compact water chillers suitable for outdoor installation down to -5°C. Including crank pan heater, electronic expansion valves, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure pump. Extras: - Open filling system/ tank attached - Bypass with manual valve between water inlet and outlet Cooling capacity kW 66 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 11.2 Available pump pressure (bar) 4.68 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 39 Max. Current (A) 68 Starting Current Circuit (A) 213 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 108 ...

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Allestimento: Insulation,Stato: used,Volume / Litri : 250.000,Design: upright,Standing form: Frame,Insulation: present,Insulating sheath: riveted,Insulation material: PU foam,Material insulating jacket: Aluminium,Insulation thickness: 150,Diameter outside: 4.550,Total height: 22.950,Wall thickness underbody: 15,Wall thickness cylinder: 5,Technical documents: various documents,Type plate: Yes,Discontinued: available,Last use: Brewery,Material in contact with the product: V2A 1.4541 ( AISI321),Ground Bearings: No,Power Disturbers: No,Ground Bearings: No,Power Disturbers: No

Heraeus Thermo UT 6200 Drying Oven For sale is a used laboratory heating stove of the renowned brand Thermo – type UT 6200, manufactured in Germany. Technical details: Model No.: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.60 kW Current consumption: 11.8 A Protection class: Class 3.1 Degree of protection: IP 20 Temperature protection: DIN 12880/1 Condition: Used, fully functional. Externally with slight signs of wear (see pictures). More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Colortronic Dry-Flex M400 Granulate Dryer For sale is a used Dry-Flex M400 granulate dryer from the manufacturer Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (D) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating capacity: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Application: Plastics processing, injection molding, extrusion Condition: Used, functional Buy Colortronic Dry-Flex M400 Granulate Dryer and other items at low prices – Here you can buy goods from the professionals for the professionals – In our SHOP you will find more attractive offers.

Salt spray test by Weiss Salt Spray Test Chamber with Corrosion Testing Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: Room temp. up to +50 °C Condensation water test: Room temp. up to +45° Extensive documentation available incl. wiring diagram, parts list, manual, etc The plant is still fully functional. It is located in a research facility and has rarely been used.

A mixing vessel KG Bremen and two stirrers PRG and IKA are available. 1) Mixing vessel KG Bremen, year of manufacture: 2019, max. operating pressure: atmospheric, max. operating temperature: 80°C, volume: 1150L, max. double-jacket operating overpressure: 5bar, max. double-jacket operating temperature: 80°C, material: 1.4301. 2) Precision stirrer PRG R112M-6, year of manufacture: 2004, agitator length: 930mm, impeller diameter: 160mm. 3) Precision stirrer IKA RF 04-T-1085, year of manufacture: 1999, total length: 1100mm, impeller diameter 1/2: 160mm/200mm. An on-site inspection is possible.

Various plate, bag and candle filters from lafonte Models: MIX 7D2 EVT12 GAM MIX 15D2 EVT20 GAM MIX 15C2 EVT20CER GAE

Mefiag Satilum filter system Long Life Unit 3x with control system

8x lafonte plate filter BIG 36D3 KPP951 TX

IKS Cooling System

ProMinent VAMC07026PVT00PM00

ProMinent ALPC1008PVT20P30

8x ProMinent dosing pumps DLTA1020PVT2000UA1030DE0

Control screening machine BÜHLER MKZF 40/90 D 11 kW Very good condition

Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.

Condition: brand new,Volume / litre: 105,000,Specific gravity of the medium ( to/m³): 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside / mm: 3,342,Cylindrical height / mm: 12,000,Total height / mm: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/ventilation, disc valve,Outlet: DN80 DIN 11851 , Remarks: Pictures shown are of an identical tank with a slightly smaller volume, material in contact with the product: V4A 1.4401/04

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...

A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.

A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 2 ...

2 identical NH3 Bitzer cooling machine systems Standing on sturdy frames supervised by Anderten Kälte-und Klima GmbH Type:OSKA 8571-K Year of construction 2006

Equipment: Insulation, agitator,Manufacturer: Bartec rind,Condition: used,Volume: 125,000,Bottom floor: Conical bottom,Design: upright,Stand shape: Stand frame,Insulation: present,Insulation material: PU foam,Diameter inside: 3,850,Diameter outside: 3,965,Cylindrical height: 10,570,Total height: 14,000,Wall thickness underbody: 6,Year of construction: 2000,Technical documents: Drawing,Manhole / dome: in the cylinder, in the top floor (DN 500),Type plate: Yes,Equipment: Ventilation, Spray head,Spout : 125,Remarks: Indicated total height estimated according to drawing Manhole cylinder 510/410 mm

Weiss Climate Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless Steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 litres Outer housing Material: double-coated zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paintwork: light grey (RAL 9002) Door, double-leafed: hinged left and right Equipment: Feed-through in floor and ceiling: 2 pieces each, NW 100 mm, for inserting the pulsating tables Feed-through in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measurement and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Opera ...

IKS cooling unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. pressure: 27.6 bar Temp. min/max: -10/55C Cooling capacity: 20.4 kW Compressor input power: 5.6 kW Temperature constancy: 2 K Tank capacity: 110 litres Water connections: 1 1/4" AG inches Cooling air volume: 5370 m3/h Mains connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: LxWxH 980 x 800 x 1785 mm More items - new and used - can be found in our shop! International shipping costs on request!

Machine name: Chamber filter press used Manufacturer: Simex Sauer Type: SPK 80 Year of Make: 2000 Design: Side-spar press Filter pressure: 16 bar Press capacity: approx. 1,000 litres Procedure: Closed Filter area: Approx. 80 m2 Plate format: 800 x 800 mm Number of plates: 78 Panel material: Polypropylene Plate Feed: Manual Filter Cloths: No Filter Cloth Washer: No Panel package length: 4,400 mm Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 6,400 x W 1,400 x H 1,500 mm Curb weight: 6,000 kg Technical documentation: No Accessories: A control cabinet & a hydraulic system Condition: Used Price: On request