machines and plants for process engineering used for sale (7,688)

A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible.

Condition: used,Volume: 42,000,Shelves: Clapper bottom,Design: lying,Stand shape: feet height adjustable,Number of feet: 6,Diameter outside: 3,000,Cylindrical length: 5900,Total height: 3,650,Total width: 3,100,Total length: 6,900,Manhole / dome: in the topstock,Type plate: No,Equipment: Level indicator (without guarantee), Spray head,Outlet: available,Outlet: 65,Last use: Foodstuffs,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Bottom bearing: No,Power Interferer: No,Bottom Bearing: No,Power Interferer: No

Condition: used,Manufacturer: Gram Equipment,Total height: 1,850,Total length: 2,100,Total width: 630,Remarks: The continuous ice cream freezer GIF-2000 (built in 2008) from Gram Equipment is a high-performance freezer that can be operated with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yoghurt, sauce, etc. The system was in use until September 2023 and was then professionally inspected for rapid

Radial duct fan for easy, direct installation in the sewer system. Housing made of galvanized sheet steel. Rated Voltage: 400V Frequency: 50Hz Phase(s): 3~ Power consumption: 1,246W Current: 2.25A Speed: 1,315 r.p.m. Volume flow: max. ; 3,168; m³/h Minimum pressure, static: 250Pa Max. conveying device temperature: max. 40°C Max. conveying device temperature at speed control: 40°C Sound pressure level in 3m: 57dB(A) Degree of protection, motor: IP44 Weight: 31 kg Rectangular channel connection, height at inlet & outlet: 300 x 600mm

TWO-COMPONENT DOSING AND MIXING SYSTEM Little used. Only in the development department, no series production. The new price of the system was over 20,000 euros plus VAT. Facility details: - Total power requirement: 3.0 kW - Basic housing G22 for 30/60 L container - Base frame with drip tray, protective frame, crane eyelet, motor mount, compressed air filter regulator, pressure gauge, quick couplings and control cabinet, mounted with fixed and swivel castors - 2x dosing pump drive 0.55 kW incl. frequency converter and pump carrier = 1x dosing pump KF0/4; 1x Dosing pump FP/S14-N19; 1x Tank VA 60L, Tank Agitator 0.18kW (A-Comp.) - Respiratory dryer - Recirculation - Hoses - Mixing head GP 23 static/D low dead space - 2009 model with separately pneumatically controlled fluid valves - Air purge valve autom. Handle with E-switch - 4 solenoid valves 5/2-way - Static mixer - I ...

Offer 20244 Granulate dryers Technical data approx.: - Filling quantity approx. 250 L - Granulate feed via suction device - Heating capacity 10 kW - Total drive power 10.5 kW -Thermostat - Compressed air connection 6 - 8 bar - Mobile version - Space requirements W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Lister KL5L air-cooled chiller Manufacturer: Lister Type KL 5 L kW: 3.25 Voltage: 400 V Frequency: 50 Hz 6.3 Amps Refrigerant: R 134a Max. operating pressure: 13 bar Dimensions: (WxDxH) 940 x 560 x 1100 mm More items - new and used - can be found in our shop! International shipping costs on request!

Heraeus Minifuge RF Analog temperature setting: -40 to 30°C Speed 0 to 6000 rpm, analogue adjustable Timer 0 to 60 min or continuous Rotor Sepatech 3360 for 4 uses, max. speed 6000 rpm Brake function Automatic imbalance shutdown Automatic lid locking during use Dimensions: approx. 68 x 67 x 56 cm (W x H x D) Weight: 70 kg More items - new and used - can be found in our shop! International shipping costs on request!

Hettich 22R Refrigerated Centrifuge Speed: n = 18,000 rpm / RCF 31,514 Temperature in the spin chamber: infinitely variable from -20°C to +40°C Running time 1-99 min, ∞ (continuous run), PULSE button (for short run in seconds) Dimensions (HxWxD): 278 x 333 x 620 mm Voltage: 220 - 240 Weight approx: 36 kg incl. rotor 1153 30x3 g Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!

Aluminum Tank Alutank Aluminum Tank 2200 Litter Aluminum Tank Diameter: 160 cm Height tank: 130 cm Total height: 200 cm approx. 2200 litres More items - new and used - can be found in our shop! International shipping costs on request!.

Tumbler screening machine, used Type : ATS 600 / 2 Manufacturer : Allgaier --> Ø 600 mm, 2 screen decks, 3 outlets, with feed hopper.

Schick ENK 404-5.7 TK 404-1.3 Refrigeration Unit Schick Refrigeration Unit ENK 404-5.7 TK 404-1.3 Nominal voltage: 400 V Maximum operating current: 17 A 50 Hz Control voltage: 230 V Refrigerant R 404A Ab. Operating overpressure: 25 bar More items - new and used - can be found in our shop! International shipping costs on request!

Amico Uniflair SDC0200B precision air conditioner Model No.: SDC0200B Coolant Type Water Fan/s: Vent. with forward-drawn Shovel Power Voltage Device: 230V/1ph/50Hz SERVICE CONDITIONS Drying Ball Temperature 24.0 °C Wet bulb temperature 17.1 °C Relative humidity 50 % Altitude a.s.l. 0 m Air back pressure 20 Pa Entry Temp. d.Coolant 7.0 °C Outlet temp. d. Coolant 12.0 °C Glycol content 0 % Freezing temperature 0.0 °C Coolant flow rate 1237 l/h Coolant flow rate 0.34 l/s SERVICES AND FEATURES Total cooling capacity 7.2 kW Sensitive cooling capacity 6.4 kW Total net cooling capacity 6.7 kW Net sensitive cooling capacity 5.9 kW SHR 89.0 % EER ( Cooling Capacity / System Power Consumption 13.9 kW/kW Air flow rate of air conditioner (dry) 1600 m³/h Air flow rate of air conditioner (dry) 0.44 m³/s Air temperature outlet/unit outlet 12.9 °C Relative humid ...

A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible.

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

A Robuschi (Gardner Denver) blower including a rotary valve and spare blower is available. Intake volume: 403m³/h, differential pressure: 300mbar, temperature increase: 35°C, power: 5kW, speed: 3900rpm, efficiency: 84.8%, motor power: 11kW. Includes Zeppelin AG11 rotary valve and replacement blower. Documentation available. On-site viewing possible.

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

Tumbler screening machine, used Type : MTS 1200 / 4 Manufacturer : MINOX Siebtechnik GmbH 4 Deck Machine, Diameter per sieve : 1200 mm; Drive : 4 KW; --> machine checked on delivery and ready to run, top condition!

ManuMatik / KraussMaffei High Pressure Cylinders The high-pressure cylinders come from a commutator press and were used there until the end. Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are also installed Check Valves z2S16-1-51 Pressure Reducing Valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x pressing unit Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

KSB Submersible Motor Pump UPA 150S-12 Pump, 1.5 kW KSB Submersible Motor Pump UPA 150S-12 Pump, 1.5 kW the pump is apparently new. But has traces of storage. The cable was probably eaten by mice (see pictures) The second picture belongs to a pump in its original packaging, which I offer in another offer. More items - new and used - can be found in our shop! International shipping costs on request!

Grundfos TPED 50-160 / 2-S AFA-BAQE Original price 6500 € APPLICATIONS -Heating - Local hot water supply systems - Refrigeration and air conditioning systems FEATURES AND BENEFITS - Low power consumption - Correction according to existing working conditions - Easy to install Specifications: Frequency of rotation2900 rpm Nominal infeed17 m3 / h Nominal Head12 m Max hydrostatic head160 dm Shaft sealBAQE Fluids: Working fluidWater Fluid Temperature Range0.. 120 ° C Temperament. Liquids20 ° C Density998.2 kg/m3 Materials: Pump housingcast iron EN-JL1040 ASTM A48-40 B ImpellerCast iron EN-JL1030 ASTM A48-30 B Electrical data: Engine Type80B Number of poles2 Rated power - P22 x 1.1 kW Industrial Frequency50 Hz Nominal voltage3 x 380-500 V Rated Current2.15-1.80A Cos is a force characteristic0.91-0.82 Rated Speed360-4000rpm Energy ef ...

Year: 1983 Explosion-proof Subject to prior sale - errors possible Internal reference number: M-1212

Year: 1985 Electr. Connected load: 60 kW 50 Hz Hydraulic operating pressure: 150 bar Explosion-proof Subject to prior sale - errors possible! Internal reference number: M-1211

Year: 1979 El. Connection: 30 kW 50 Hz Hydraulic operating pressure: 150 bar Explosion-proof Subject to prior sale - errors possible Internal reference number: M-1210

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

Process cooler, chiller, chiller - air-cooled, Manufacturer: MTA S.p.A. Type: TAEevo Tech 902 P3 – 178 kW TAEevo Tech 902 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 90 Max. current (A) 160 Starting Current Circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Y ...

We offer a refurbished rotary lobe blower Brand: Kaeser Type: Omega 63 Plus All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.