Process vessels used for sale (90)

# Industrial Liquid Preparation, Fermentation and Storage Line – 440,000 L Total Nominal Capacity Overview Complete industrial installation designed for the preparation, aerobic fermentation, mixing, transfer and storage of liquid products. The system is configured to handle the different stages of an industrial liquid-processing operation, including water and solid raw material introduction, mixing, agitation, aeration, antifoam dosing, recirculation, vapour extraction and subsequent product storage. According to the available process diagram, the installation comprises two 60,000-litre preparation and fermentation tanks and two 160,000-litre storage tanks, providing a combined nominal capacity of 440,000 litres. The tanks are installed vertically and interconnected through a network of process pipework, pumps, valves, instrumentation and auxiliary equipment. The fermenta ...

Auction-ID: A1-50750-57

ARTPOL THERM brand pressure tank model ZT-122, with a capacity of 8 liters, manufactured in 2022 and intended for industrial facilities. The equipment has a vertical cylindrical construction with domed bottoms and has several process connections, auxiliary valves and a side circuit. It has a maximum operating pressure of 10 bar and a test pressure of 15 bar, with a working temperature range of -30 to +120 °C. Equipment weight: 5.5 kg. Total capacity 8 L Material: Stainless Steel Technical characteristics Model ZT-122 Working body pressure 10 bar Body working temperature -30 +120 ºC Working Conditions: Pressure Transportation Information Weight 5.5 Kg No documentation Unused

Vertical stainless steel tank with a capacity of 1200 litres, manufactured by OLIVER Y BATLLE, model DIL-1200, year 2000. The equipment is equipped with a stirring system by means of an agitator driven by an 11 kW motor at 1460 rpm, 50 Hz and 400 V, with PL 125/2 EO gearbox and a reduction ratio of 20.96 i. The tank is built on legs and has a Klopper-type upper and lower bottom, as well as a 450 mm diameter manhole at the upper bottom. It has top connections of 2 x DN50, 2 x DN25 and 2 x 1" connections. The discharge is DN80. The body has an inner diameter of 1190 mm, a height of 1100 mm and a thickness of 4 mm. Both the upper and lower depths are 4 mm thick. The equipment has transport dimensions of 1450 x 1450 x 3950 mm and a weight of approximately 1000 kg. Total capacity 1200 L Material: Stainless Steel Technical characteristics Model DIL-1200 Year of manufacture  ...

Vertical stainless steel tank of the APV BAKER IBERICA brand, 4,800 liters., manufactured in 1989, the equipment has a configuration on legs, with upper and lower bottoms of conical geometry and agitation system by means of a three-blade propeller. The tank is equipped with a Ø450 mm upper manhole, two Ø180 mm sight glasses and different connections for process integration. It has a side socket for sampling, DIN20 and 3/4" side connections and DIN32 and DIN50 top connections. The body and both bottoms are 3 mm thick. The discharge is 240 mm high with a 2" junction Volume Total capacity 4800 L Material: Stainless Steel Technical characteristics Year of manufacture 1989 Vertical Orientation and Installation Tripala helix agitation On legs Tapered bottom Tapered top bottom Manhole on top bottom Equipment dimensions Body height 1000 mm Body thickness 3 mm Bott ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

43,000 litre vertical storage tank made of stainless steel, designed to store low-viscosity liquids in industrial facilities. This high-capacity tank can be used in plants in the chemical, food, cosmetic and other process industries, after checking the compatibility of the product. The tank is installed on gussets and has a Klopper-type upper and lower bottom, as well as a side manhole that allows access to the interior for inspection, cleaning and maintenance tasks. The body has a height of 4,000 mm and an external diameter of 3,400 mm. For transport, the tank is placed in a horizontal position and has dimensions of approximately 5,300 mm in length, 3,400 mm in width and 3,400 mm in height. Its approximate weight is 4,200 kg. It is a second-hand industrial warehouse, without visible branding and without documentation, available for sale in its current condition. Volume  ...

ATEX buffer hopper manufactured in stainless steel by E.BACHILLER in 2003, with a total capacity of 3,000 liters. Incorporates agitation and 4 support brackets. Motor: 4 kW 1435 rpm 50 Hz 380 V. Connections: Manhole of 440 mm in diameter. Top flange with an outer diameter of 315 mm. Lower flange with 620 mm outer diameter. Lower flange with an outer diameter of 340 mm. Hopper dimensions: Body height: 1,450 mm. Inner body diameter: 1,500 mm. Bottom diameter: 830 mm. Hopper inclination: 520 mm. Total capacity 3000 L Material Stainless steel Year of manufacture 2003 ATEX Working Conditions Transportation Information Width 1700 mm Height 3000 mm No documentation In your state

Stirring and dosing tank 150 liters for production and dosing liquids for everyday use into ready-to-sell containers. These can be: - Cleaning products - Liquid cosmetics - Additives such as Adblue - All low-viscosity, non-flammable liquids, in household and industrial applications Description of the facility: Stirring and dosing tank 150 litres with geared agitator Rexroth 0.18 KW, i = 25, propeller stirrer 150 mm, rotary vane pump and nozzle Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of which with brake. Gear motor: Rexroth, 3 x 230/400 volts, 0.18 kW, i = 25, n²=53 rpm. With motor protection plug. Shaft: Precision stainless steel shaft D10, length 850 mm, diameter 10 mm, Material Stainless Steel Coupling: 2 clamping sets 17 by 10 mm, material  ...

Dismantled prototype bottling/refuelling plant – special plant with V2A tanks For sale is a dismantled prototype filling/refuelling plant from industrial use. It is a custom-made / special construction by Evonik / Daimler AG. The system has been professionally dismantled, is in good condition and is prepared for transport. Technical data / equipment Manufacturer: Evonik / Daimler AG Plant type: Prototype filling/refueling system Model: Special plant / tank storage and filling plant Year of construction: 2010 2 tanks of 40 m³ each 1 tank of 30 m³ Tanks / system made of V2A Pumps stored separately Pjdozabgwjizw Taljgl Pump directory can be provided on request Condition: disassembled, unchecked, prepared for transport Remarks The system is sold unchecked due to its dismantled condition. A viewing is recommended. Technical inspection, media compatibi ...

Equipment: Agitator,Condition: used,Volume: 990,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 990,Cylindrical height: 1,180,Total height: 3,100,Type plate: Yes,Discharge: available,Last use: Aroma factory,Material in contact with the product: V2A 1.4541 (AISI321),Material feet: Stainless steel,Manufacturer agitator: Stelzer,Power: 1,Speed: 50 - 300,Agitator: Propeller,Voltage Volt: 220/380,EX-protected: Motor is explosion-proof (the Compliance with the applicable ATEX directives under local conditions must be verified),Ground storage:

Material Name: D510mm Material Brand: Generic Model: NIL Material Type: D510mm Material Specification: D510mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Equipment: Agitator,Condition: used,Volume: 550,Design: upright,Stand shape: feet height adjustable,Number of feet: 3,Diameter inside: 790,Cylindrical height: 990,Total height: 3,200,Nameplate: Yes,Outlet: available,Last use: Aroma factory,Material in contact with the product: V2A 1.4541 (AISI321),Material feet: Stainless steel,Manufacturer agitator: Stelzer,Power: 1,Speed: 50 - 300,Agitator: Propeller,Voltage Volt: 220/380,EX-protected: Motor is explosion-proof (the Compliance with the applicable ATEX directives under local conditions must be verified),Ground storage:

Material Name: D700mm Material Brand: Generic Model: NIL Material Type: D700mm Material Specification: D700mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Equipment: Insulation, agitator,Condition: used,Volume: 850,Design: upright,Stand form: Frame,Insulation: available,Material insulating jacket: stainless steel,Diameter inside: 1.090,Diameter outside: 1.280,Cylindrical height: 830,Total height: 1.830,Manhole / dome: in the top floor ( 450),Nameplate: No,Note: slight adhesions, dents on the insulating jacket,Remarks: Container on frame rest made of Fe Fastening of the manhole cover incomplete,Material in contact with the product: V2A 1.4301 ( AISI304),Power: 1.5 / 2.2,Speed: 493 - 993,Agitator: Propeller,Voltage Volt: 380,Bottom Bearing:

Material Name: D1100mm Material Brand: Generic Model: NIL Material Type: D1100mm Material Specification: D1100mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Equipment: Overpressure,Manufacturer: Eckhardt + Hedderich Apparatetechnik,Condition: used,Volume: 130,Max. overpressure: 1.50,Max. permissible Operating temperature : 200,Design: upright,Diameter inside: 490,Total height: 980,Manhole / dome: Hand hole,Type plate: Yes,Outlet: not available,Remarks: Diameter hand hole approx. 150 mm Dip tubes inside the tanks partly smaller dents,Last purpose: Pharmaceuticals,Material in contact with the product: V4A 1.4401/04 (AISI316),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

Material Name: Polymer Tank 1450mm(W) x 4500mm(L) x 600mm(H) Material Brand: Generic Model: Polymer Tank Material Type: Tank Material Specification: 1450mm(W) x 4500mm(L) x 600mm(H) SS304-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: SLURRY TANK 1306mm(W) x 4500mm(L) x 550mm(H) Material Brand: Generic Model: Slurry Tank Material Type: Tank Material Specification: 1306mm(W) x 4500mm(L) x 550mm(H) SS304-2B, 2mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: Coagulant Tank 1540mm(W) x 4600mm(L) x 700mm(H) Material Brand: Generic Model: Coagulant Tank Material Type: Tank Material Specification: 1540mm(W) x 4600mm(L) x 700mm(H) SS304-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: Latex Tank 1 & 2 2026mm(W) x 6000mm(L) x 700mm(H) Material Brand: Generic Model: Latex Tank 1 & 2 Material Type: Tank Material Specification: 2026mm(W) x 6000mm(L) x 700mm(H) SS304-2B, 2mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Equipment: Agitator,Condition: used,Volume: 8,000,Design: hanging,Stand shape: claws,Diameter inside: 2,100,Cylindrical height: 2,500,Total height: 5,500,Wall thickness underbody: 6,Wall thickness cylinder: 6,Wall thickness upper floor: 8,Manhole / dome: in the upper floor,Type plate: Yes,Equipment: crane eyelets,Outlet: flange DN100,Note: slight adhesions,Remarks: 3 claws made of V2A,last purpose: chemical,material in contact with the product: V2A 1.4541 (AISI321),material feet: Stainless steel,Manufacturer agitator: Ekato,Power: 22,Speed: 61,Agitator: Beam stirrer,Voltage volts:

Material Name: Post Leaching Tank 1 & 2 2000mm(W) x 6000mm(L) x 600mm(H) Material Brand: Generic Model: Post Leaching Tank 1 & 2 Material Type: Tank Material Specification: 2000mm(W) x 5900mm(L) x 600mm(H) SS304-2B, 2mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Equipment: Heatable/coolable,Condition: used,Volume: 12,220,Design: rectangular,Stand shape: feet,Number of feet: 7,Heating/cooling (filter bar): available,Temperature control inside: Cooling plate,Total height: 2,700,Total width: 1,480,Total length: 4,450,Type plate: No,Outlet: DN40 DIN 11851,Remarks: 2 cooling plates inside the tanks 1 manhole approx. 340 x 440 mm in the front floor,last purpose: wine storage,material in contact with the product: V2A 1.4301 (AISI304), Material temperature control system: V2A 1.4301 (AISI304),Material feet: stainless steel,Bottom bearing: No,Current interferer: No,Bottom bearing: No,Current interferer: No

Material Name: PRE LEACHING TANK 1&2&3 2000MM(W)X6000MM(L)X600MM(H) Material Brand: Generic Model: Pre Leaching Tank 1 & 2 & 3 Material Type: Tank Material Specification: 2000mm(W) x 5900mm(L) x 600mm(H) SS304-2B, 2mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: RINSE TANK 1&2 2000MM(W)X2500MM(L)X600MM(H) Material Brand: Generic Model: Rinse Tank 1 & 2 Material Type: Tank Material Specification: 2000mm(W) x 2400mm(L) x 600mm(H) SS316-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Material Name: ACID TANK 1900MM(W) X2500MM(L)X600MM(H) Material Brand: Generic Model: Acid Tank Material Type: Tank Material Specification: 1900mm(W) x 2000mm(L) x 600mm(H), SS316-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Equipment: Agitator,Condition: factory new,Volume: 1,023,Max. max. Operating temperature: 80,Design: Container,Shape: Frame,Diameter inside: 1,080,Cylindrical height: 1,000,Total height: 1,950,Technical documents: Drawing, declaration of incorporation within the meaning of the EC Machinery Directive, Installation instructions,Manhole / dome: in the top floor, Hand hole,Type plate: Yes,Equipment: Ventilation/ventilation, Ball valve,Outlet: DN50 DIN 11851 ,Remarks: Frame Fe (galvanized),Surface outside: Blank rolled IIIc,Material in contact with the product: V2A 1.4301 (AISI304),Power: 0.75, Speed: 97,Agitator: Beam Stirrer,Voltage

Material Name: ALKALINE TANK 1 & 2 1900mm(W) x 2000mm(L) x 600mm(H) Material Brand: Generic Model: ALKALINE TANK 1 & 2 Material Type: Tank Material Specification: 1900mm(W) x 2000mm(L) x 600mm(H), SS316-2B, 3mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Equipment: Agitator, Overpressure, Vacuum,Manufacturer: Pharma-Con Anlagenbau,Condition: used,Volume: 800,Vacuum: 1.0,Max. overpressure: 3.0,Max. permissible Operating temperature : 143,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Diameter inside: 890,Cylindrical height: 1.110,Total height: 2.310,Manhole / dome: in the top floor (DN 400),Type plate: Yes,Equipment: Spray head, Control cabinet (without guarantee),Outlet : 25,Last purpose: Pharmacy,Material in contact with the product: V4A 1.4401/04 (AISI316),Material feet: Stainless steel,Power: 1,Speed: 680,Agitator: Propeller,RW Sealing:

Various dosing containers, different sizes.

Equipment: Agitator,Condition: used,Volume: 2,500,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 1,590,Cylindrical height: 1,200,Total height: 2,850,Manhole / dome: in the topsoil,Type plate: No,Outlet: DN50 DIN 11851,Note: slight adhesions,Remarks: Diameter manhole approx. 390 mm,Last purpose: Cosmetics,Material in contact with the product: V2A 1.4301 (AISI304),Material feet: Stainless steel,Power: 10,Speed: 950,Agitator: Propeller,Voltage Volt: 380,EX-protected: Motor is explosion-proof (compliance with the applicable ATEX directives under the

Unused Briggs of Burton process vessel, approximately 1,200 liters, in 316/316L stainless steel. The unit measures approximately 1,200 mm in diameter x 870 mm on the straight side. The unit features a bolt-on domed lid and welded hemispherical bottom. Internal design pressure rated for 10 bar/full vacuum in a range of -20 to 210 °C. 304/304L stainless steel outer jacket, rated for 10 bar design pressure/full vacuum in the range of -20 to 210 °C. The unit has a 316/316L stainless steel top-entry gate type agitator equipped with 11 kW motor/gearbox driven PTFE wall scrapers. The unit includes Silverson Model BE600 Bottom Inlet Emulsifier in 316/316L Stainless Steel, Driven by 22 kW Motor. The unit is mounted on 304/304L stainless steel legs. Volume Total capacity 1200 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless Steel 304/304L Technical characteristi ...

Equipment: Overpressure,Manufacturer: Pass + Co,Condition: used,Volume: 10.800,Max. overpressure: 3.2,Max. permissible Operating temperature : 100,Design: upright,Stand shape: feet,Number of feet: 4,Diameter inside: 2,200,Cylindrical height: 2,250,Total height: 4,100,Wall thickness underbody: 10,Wall thickness cylinder: 8,Wall thickness upper floor: 14,Technical documents: Drawing, acceptance certificate,Manhole / dome: in the cylinder, in the top floor (DN 600),Type plate: Yes,Equipment: crane eyelets,Outlet: present,Note: slight adhesions,Remarks: Manhole cylinder DN 600 double outlet DN 50,last

Vertical stainless steel tank with a total capacity of 750 litres About 3 legs. Kollper Funds. DN50 bottom outlet DN25 DN40 Top Connections Side connections DN25 DN50 DN80 Volume Total capacity 750 L Material Stainless steel Equipment dimensions Inside diameter 900 mm Body Height 1000 mm Transportation Information Width 1000 mm Height 2050 mm Documentation No documentation Status In your state Manufactured by Unbranded

Matrix Sri Carbonator/Nitrogenator Semi Automatic Carbonator/Nitrogenator Skid mounted unit complete with stainless steel control panel, mass flowmeter for gas and inverter controlled pump. Includes serpentine mixing pipe and stabilization column for finished product. Manufacturer. Matrix Sri Model: PROCAR AS3 Output 1500 to 3000 litres per hour Incoming Beer Temperature 4 Degrees C Incoming Beer Pressure required is 1.5 to 2.5Bar Minimum Carbonation value 3grammes per litre Maximum Carbonation value 6 grammes per litre Nitrogen is not Dissolved Air pressure – Minimum 6Bar Electrics 415v/50Hz/3Phase This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk