machines and plants for process engineering used for sale (7,466)

2,000-liter stainless steel reactor with jacket and heat-insulation, manufactured by GINOX Industries in 2004. Equipped with an anchor-type agitation and 4 electric resistors in the jacket. Year of manufacture 2004 Working Body Pressure ATM Bar Body working temperature 150 ºC Working pressure of half a round/ATM jacket bar Half-round volume/jacket 0.825 L Coil working temperature 150 ºC Agitation Type Ancora In its state.

New COSMOS 250 emulsifier reactor, manufactured by COMQUIMA in 2026. Stainless steel skid, AISI 316 on all parts in contact with the product, and with a useful capacity of 250 liters. It consists of a jacketed reactor and an agitation system with scrapers and homogenization: AGITATION: FULLVISC laminar displacement system with scrapers. Exclusive 3-arm design with scrapers. Rated speed of 40 rpm and power of 4 kW. HOMOGENIZATION: M.X.O.N. 120 High Shear Emulsifier. Mechanical seal with safety seal. Rated speed of 2,900 rpm and power of 5.5 kW. Designed to centralize the manufacture of fine emulsions, suspensions and high viscosity products in a single piece of equipment, easily manageable through pallet truck or toro. It allows products to be processed up to 70,000 cps and a particle size of 10 μm can be achieved. The unit is controlled by an integrated control  ...

Vacuum blade dryer manufactured by FMC OISSEL, with a volume of 6000 liters. Material Stainless Steel 316/316L Technical characteristics Year of manufacture 1972 Working Body Pressure Atm bar Working Body Temperature 130 ºC Total Body Volume 6000 L Half-calf/liner working pressure 3 bar Half-round/sleeve working temperature 130 ºC Half-calf/shirt volume 1200 L Coil Working Pressure 3 bar Transportation Information Length 6000 mm Width 1900 mm Status In your state Manufactured by F.M.C. OISSEL

Atomizer manufactured by NIRO ATOMIZER in 304 stainless steel, model F10. Material Stainless steel Technical characteristics Model F10 Status In your state Manufactured by NIRO ATOMIZER

Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)

ELCA brand heat exchanger of 10.2 m2, manufactured in 1989. Material Graphite Technical characteristics Year of manufacture 1989 Housing volume 60 L Tube Steps 1 Number of tubes 61 Working temperature of the tubes 160 ºC Working pressure of the tubes 3 bar Working temperature of the housing -25/+160 ºC Working pressure of the housing 3 bar Equipment dimensions Housing diameter 405 mm Length of the tubes 2000 mm Inner diameter tubes 20 mm Transportation Information Length 3000 mm Height 800 mm Weight 580 Kg Documentation Pressure Certificate Plans Exchange Surface Exchange Surface 10.20 m2 Manufactured by Elca

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Outer diameter tubes 19.05 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Documentation Plans Exchange Surface Exchange Surface 43 m2 Status Reviewed Manufactured by Mafelca

Vertical heat exchanger made of stainless steel from the brand TALLERES MAC of 48.5 m2. Year 2001. Material Stainless steel Technical characteristics Year of manufacture 2001 Number of tubes 203 Working temperature of the tubes 230 ºC Working pressure of the tubes -1 bar Working temperature of the housing 310 ºC Working pressure of the housing 5.39 bar Equipment dimensions Length of the tubes 4000 mm Outer diameter tubes 19.05X1.65 mm Transportation Information Length 4000 mm Width 850 mm Weight 1300 Kg Documentation Plans Exchange Surface Exchange Surface 48.50 m2 Status Reviewed Manufactured by Mac Workshops

MAFELCA brand stainless steel tubular heat exchanger of 43 m2 Year 2023. Connections DN50 PN16, DN150 PN16, DN450 PN10 Material Stainless steel Technical characteristics Year of manufacture 2023 Housing volume 875 L Volume of tubes 520 L Tube Steps 2 Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 16 bar Working temperature of the housing -10/100 ºC Working pressure of the housing 10 bar Equipment dimensions Length of the tubes 4402 mm Inner diameter tubes 17 mm Transportation Information Length 5400 mm Width 920 mm Height 1250 mm Weight 1887 Kg Exchange Surface Exchange Surface 43 m2 Status In your state Manufactured by Mafelca

Stainless steel heat exchanger of the brand XCHANGER model C-125. C-125 Series heat exchanger, designed for heating and cooling low-pressure gas streams. High-performance modular equipment, ideal for applications such as post-cooling, dehumidification and air treatment in industrial systems. Manufactured with fin core and expanded tubes for maximum thermal efficiency and structural robustness. Front and rear access design allows core removal without disassembling the gas line. Suitable for pressures from vacuum to 15 PSIG High durability industrial construction Fog separator integration possible Connections adaptable according to need Material Stainless steel Technical characteristics Model C-125 Documentation No documentation Status Unused Manufactured by XChanger

WESTFALIA brand plate centrifuge model SC 35-36-177. Year 1995. Includes Netzsch mono pump 4 units in stock Transport dimensions: Centrifuge: Length 1550 mm Width 1200 mm Height 1400 mm Weight 1300 kg Mono Pump: Length 1800 mm Width 700 mm Height 1600 mm Weight 350 kg Technical characteristics Model SC 35-36-177 Year of manufacture 1995 Equipment Setup Includes tools for disassembly Mono pump Documentation Maintenance Manual Operation Manual Electrical diagrams Spare parts list Status In your state Manufactured by WESTPHALIA

WESTFALIA brand plate centrifuge model SC 35-36-177. Year 1995. Includes Netzsch mono pump 4 units in stock Transport dimensions: Centrifuge: Length 1550 mm Width 1200 mm Height 1400 mm Weight 1300 kg Mono Pump: Length 1800 mm Width 700 mm Height 1600 mm Weight 350 kg Technical characteristics Model SC 35-36-177 Year of manufacture 1995 Equipment Setup Includes tools for disassembly Mono pump Documentation Maintenance Manual Operation Manual Electrical diagrams Spare parts list

Fluid bed manufactured by INOJETT in 2004. Model IEV800-001-2004 Peripherals included: DFO 4-32-R baghouse Air heater Technical characteristics Model IEV800-001-2004 Year of manufacture 2004

Cyclon heat-insulated from the GEA brand model CYCLONE CHE 394. Year 2017. With 2 cards. Bottom outlet DN100. Top Entry Clamp 1" Clamp 1" and 4" side entrances. No documentation. Cyclon Dimensions: Length 650 mm Width 560 mm Height 1510 mm Technical characteristics Model CYCLONE CHE 394 Year of manufacture 2017 Equipment dimensions INTERIOR BODY WIDTH 560 INNER BODY LENGTH 650 INTERIOR HEIGHT BODY 1510 Transportation Information Length 2150 mm Width 992 mm Height 1100 mm Documentation No documentation Status In your state Manufactured by GEA WESTPHALIA

Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU of 3400 liters with jacket and rear agitation three. Year 2019. On 3 labels. 495mm manhole Volume Total capacity 3400 L Material Hastelloy C-276 Technical characteristics Year of manufacture 2019 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1600 mm Body Height 1600 mm Transportation Information Width 2300 mm Height 3000 mm Weight 1150 Kg Manufactured by Grau Industrial Facilities

Stainless steel reactor of the TINSMACAL brand of 2000 liters with jacket. Year 2007. Rear agitation tripala. On 3 labels. 350mm manhole Volume Total capacity 2000 L Material Stainless steel Technical characteristics Year of manufacture 2007 Equipment Setup Agitator Shirt About Labels Equipment dimensions Inside diameter 1390 mm Body Height 1350 mm Transportation Information Width 2100 mm Height 2500 mm Manufactured by Tinsmacal

Unused Briggs of Burton process vessel, approximately 1,200 liters, in 316/316L stainless steel. The unit measures approximately 1,200 mm in diameter x 870 mm on the straight side. The unit features a bolt-on domed lid and welded hemispherical bottom. Internal design pressure rated for 10 bar/full vacuum in a range of -20 to 210 °C. 304/304L stainless steel outer jacket, rated for 10 bar design pressure/full vacuum in the range of -20 to 210 °C. The unit has a 316/316L stainless steel top-entry gate type agitator equipped with 11 kW motor/gearbox driven PTFE wall scrapers. The unit includes Silverson Model BE600 Bottom Inlet Emulsifier in 316/316L Stainless Steel, Driven by 22 kW Motor. The unit is mounted on 304/304L stainless steel legs. Volume Total capacity 1200 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless Steel 304/304L Technical characteristi ...

DMN WESTINHOUSE brand rotary valve model AL 250 3N. Motor 1.1 kw 1400 rpm 50 hz 220 v. Flange outer diameter 410 mm Inner diameter flange 250 mm Technical characteristics Model AL 250 3N Transportation Information Length 700 mm Width 700 mm Height 460 mm Status In your state Manufactured by DMN WESTINGHOUSE

DMN WESTINHOUSE brand rotary valve model AL 250 3N. Motor 1.1 kw 1400 rpm 50 hz 220 v. Flange outer diameter 410 mm Inner diameter flange 250 mm Technical characteristics Model AL 250 3N Transportation Information Length 700 mm Width 700 mm Height 460 mm Status In your state Manufactured by DMN WESTINGHOUSE

GRUNDFOS brand in-line dry break pump model TPD 50-430/2 A-F-A-BQQE. Technical characteristics Model TPD 50-430/2 A-F-A-BQQE MANOMETRIC HEIGHT 29.6 Maximum pressure 16 bar Maximum temperature 120 ºC Documentation No documentation Maximum Flow Maximum flow rate 32.7 m3/h Status In your state Manufactured by GRUNDFOS

910-liter 316 stainless steel reactor with jacket made of 316L stainless steel, hermetic heat-insulation, control panel and agitation. Dashboard Description: Endress+Hauser HMI Display "Emergency reset" pilot Emergency mushroom Display RPM Product temperature display 3-position stirrers selector (1- upper agitation, 2- lower agitation, 3- both at the same time) Off-center three-blade helix shake on the upper bottom. Manufactured by SPX, Lightnin SR5S200 model with a 0.37 kW motor. Magnetic stirring on the bottom with a 0.55 kW motor. Volume Total capacity 910 L Material Stainless Steel 316/316L Equipment Setup Agitator Heat Burning Transportation Information Length 1600 mm Width 1200 mm Height 2100 mm Weight 1000 Kg Status In your state

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26 kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company

Pressure blower from the brand THE NEW YORK BLOWER model ARR-8. Year 2016. Flow rate: 56 m³/h Static pressure: 2.4 kPa Density: 1.14 kg/m³ Temperature: 30°C Absorbed power: 0.26 kW Technical characteristics Model ARR-8 Year of manufacture 2016 ENGINE 0.26kW Documentation No documentation Maximum Flow FLOW 56 L/h Status Unused Manufactured by New York Blower Company

ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Reference : C14241 ATEX flowmeter from the brand ENDRESS HAUSER model PROLINE t-mass 65. Technical characteristics Model PROLINE T-MASS 65 Equipment Setup ATEX Documentation No documentation Status In your state Manufactured by ENDRESS+HAUSER

Vertical stainless steel tank with a total capacity of 750 litres About 3 legs. Kollper Funds. DN50 bottom outlet DN25 DN40 Top Connections Side connections DN25 DN50 DN80 Volume Total capacity 750 L Material Stainless steel Equipment dimensions Inside diameter 900 mm Body Height 1000 mm Transportation Information Width 1000 mm Height 2050 mm Documentation No documentation Status In your state Manufactured by Unbranded

130-liter stainless steel reactor with jacket and agitation. Anchor type agitation with 3 propellers of 1 blade at different heights Agitation motor 1.5 kw 1420 rpm 50 hz 230 v. Equipped with two 2,500 W electric heating elements in the jacket Control panel incorporated into the reactor On wheels. Volume Total capacity 130 L Material Stainless steel Technical characteristics ENGINE 1 1.5 kW 1420 rpm 50 Hz 230 V Equipment Setup Agitator Shirt On wheels Transportation Information Length 1300 mm Width 900 mm Height 1700 mm Documentation CE Certificate Status In your state

Bicone dryer manufactured by LLEAL, model SBC-1400.

Micronizer mill made of 316 stainless steel by HOSOKAWA. MICRON PROCES MS20 model. Material Stainless Steel 316/316L Technical characteristics Model MICRON PROCES MS20 Documentation No documentation Status In your state Manufactured by Hosokawa

Stainless steel mill, manufactured by STEPHAN, model MICROCUT MCH 20k. Year 1998. Capacity 1200 L. Motor power: 15 kw at 2925 rpm 50 Hz 400 V. Hopper dimensions: Upper bottom: inner width 470 mm, inner length 540 mm. Lower bottom: inner width 170 mm, inner length 300 mm Material Stainless steel Technical features Model MICROCUT MCH 20K Year of manufacture 1998 Transport information Length 1400 mm Width 700 mm Height 1550 mm Weight 1200 Kg Made by Stephan