machines and plants for process engineering used for sale (7,634)

Second-hand jacketed stainless steel reactor. Equipped with a propeller-type agitation at different heights. Motor 2.2 kW 400 V 50 Hz 1,410 rpm Working conditions ATEX Heating and cooling Heat Burning Shirt Orientation and installation Vertical No legs In your state

Nucha dryer filter made of second-hand stainless steel. It includes a hydraulic power plant, which controls: Up/down agitation. Trigger agitation. Open/close solids discharge. Raise/lower plate. Mounted on structure. Equipment dimensions Inner diameter 880 mm Internal height 805 mm Transportation Information Length 2,350 mm Width 2,100 mm Height 3,200 mm Weight 1,600 Kg No documentation Filtration area 0.6 m² In your state

ATEX basket mill from the NTD brand model UVI MILL-CN10 VE ATEX. Features: Maximum pressure 8 kg/cm2 Maximum temperature 50 ºC Maximum speed: 750 rpm Maximum shaft height 1000 mm Cowless diameter 248 mm Motor 7.5 kw 1460 rpm 50 hz 400 v Technical characteristics Model UVI MILL-CN 10 VE ATEX Year of manufacture 2017 Motor 7.5 kw 1460 rpm 50 hz 400 v Transportation Information Length 1560 mm Width 700 mm Height 1660 mm Weight 500 Kg Documentation CE Certificate Maintenance Manual Operation Manual Plans Electrical diagrams In your state

ATEX filter press from the TEPSA brand model HPLE of 3.3 m2, made of iron. Technical characteristics HPLE Model Year of manufacture 2017 Working pressure of the hydraulic unit 312 bar Number of Plates 15 Maximum plate capacity 15 Plate dimensions 470x470 mm Maximum filtration pressure 16 bar Equipment Setup ATEX Electrical panels Hydraulic power plant Closed execution Working conditions Pressure In your state

Stainless steel tubular heat exchanger from the MAFELCA brand with an exchange area of 43 m2. Connections: DN50 PN16, DN150 PN16, DN450 PN10. Technical characteristics Year of manufacture 2023 Housing volume 819 L Tube volume 497 L Number of tubes 162 Working temperature of the tubes -10/50 ºC Working pressure of the tubes 15 bar Working temperature of the housing -10/160 ºC Working pressure of the housing 8 bar Equipment dimensions Tube length 4,102 mm Outer diameter tubes 19.85 mm Transportation Information Length 5,400 mm Width 920 mm Height 1,250 mm Weight 1,887 Kg Documentation Plans Exchange area 43 m2 Status Reviewed

Industrial HDT Hydrotreatment Reactor – 159 m³ – 177 Tons – H₂ Service For sale: Industrial Hydrotreatment (HDT) Reactor previously in H₂ service. The equipment is fully decommissioned, inerted, internally empty, and prepped for safe transport and dismantling. Ideal for refineries or petrochemical plants looking to expand or replace existing hydroprocessing units. Key Specifications: Equipment Type:Hydrotreatment Reactor (HDT) Volume / Capacity: 159 m³ Empty Weight: 177 Tons (177,000 kg) Previous Service: Hydrogen (H₂) Condition: Used / Decommissioned. Fully inerted and internally emptied. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets (P&ID, metallurgical specs), or to arrange a site inspection.

Counter-current pellet cooler manufactured by MÜNCH-Edelstahl GmbH, model SDCC5, unused. The equipment works by means of a counter-current air circulation system, allowing the temperature and surface humidity of the product to be reduced before storage or packaging. It is equipped with square-section cooling chamber, integral discharge system, upper rotary airlock driven by geared motor, hydraulic unit for driving the discharge system, and level and temperature sensors for process control. Its nominal capacity is up to 5 tons/hour for pellets of 6 mm in diameter, depending on the product and operating conditions. Technical characteristics SDCC5 Model Year of manufacture 2014 Unused

RIERA NADEU model 200F-1000 centrifuge in 316 stainless steel Technical characteristics Model 200-F1000 Maximum load (density 1.25 kg/dm³) 250 Kg Payload 200 L Maximum speed 1,085 rpm Equipment dimensions Basket diameter 1,000 mm Cake thickness 145 mm Basket height 480 mm No documentation In your state

Reactor made of stainless steel with half a barrel, and a capacity of 900 liters. Offload centered on the bottom. On 4 labels. With 2 current breakers. Manhole diameter of 450 mm. 4 flanges and 2 sight glasses at the top bottom. 1 flange intended for off-centre agitation on the upper bottom. Volume 900 L Material Stainless Steel 316/316L Shirt or mid-calf material Stainless steel Equipment Setup Mid-round Breakers About Labels Equipment dimensions Body inner diameter 870 mm Inner body height 950 mm Transportation Information Height 2550 mm Width 1350 mm In your state

Used Calmic Eurovent stainless steel vacuum tray dryer. It has approximately 3 square meters of drying area. Includes (3) individual drying compartments approximately 980mm wide X 1010mm deep X 160mm high. It also includes (6) stainless steel trays approximately 470mm wide X 945mm long X 40mm deep. Material Stainless Steel 316/316L Weight 1155 Kg In your state

ATEX stainless steel 316 3V Tech 250 FPP/SD FM nucha filter dryer with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industry. Material Stainless Steel 316/316L Technical characteristics Model 250 FPP/SD FM Year of manufacture 2010 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Working pressure half-round/liner -1/+10 bar Working temperature of half round/shirt -25/+200 ºC Half-calf/shirt volume 80+20 L Filtration area 2.5 m2 Equipment Setup ATEX Electrical panels Bag filter Hydraulic power plant Centrifugal pump Transportation Information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 Kg Unused

Stainless steel nucha filter dryer from the E.BACHILLER brand of 0.4 m2. Year 1987. Hydraulic power plant with 7.5 hp 1410 rpm 50 hz 220 v motor Technical characteristics Year of manufacture 1987 Working body pressure 3 bar Body working temperature 300 ºC Total body volume 680 L Working pressure half-round/liner 3 bar Working temperature of half round/jacket 300 ºC Half-round volume/shirt 28 L Filtration area 0.4 m2 Equipment Setup Hydraulic power plant Transportation Information Length 2100 mm Width 2100 mm Height 2100 mm Weight 500 Kg No documentation In your state

Decanter manufactured by RIERA NADEU manufactured in ASTM 316L - DUPLEX, model 600 D AS-2300. Features Year of manufacture 2013 Rotor inner diameter 356 mm Maximum permissible speed 3570 rpm Electric power 30 kW Maximum permissible flow rate 7 m3/h Product temperature plus/min +60/-10ºC Max/min manifold pressure 4000 Pa Centrifugal factor max. 2500 g Maximum permissible density 1250 kg/m3 Transportation Information Length 3000 mm Width 1600 mm Height 1100 mm Unused

Decanter brand WESTFALIA model AD0509, manufactured in 2003. Features: Rotor diameter: 300 mm Maximum speed: 4500 rpm Maximum flow: 7 m3/h Product temperature: 5/80 ºC Maximum density: 2.6 kg/dm3 Height of complementary legs: 920 mm Electrical panel dimensions: Height 2200 mm Width 1600 mm Depth 600 mm Transportation Information Length 2600 mm Width 700 mm Height 1050 mm Documentation Operation Manual Electrical diagrams Spare parts list In your state

Second-hand decanter manufactured by PIERALISI in 2007, model BABY 2. Maximum density of 1.4 kg/dm3. Maximum revolutions 5,200rpm No documentation. In your state

Decanter from the brand PIERALISI model BABY 1. Features Year of manufacture 2016. Maximum density 1.4 kg/dm3 Maximum revolutions 5200 rpm Motor 5.5 kw 2915 rpm 50 hz 400 V No documentation Transportation Information Length 1850 mm Width 1150 mm Height 1450 mm Weight 620 Kg In your state

GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state

Enameled reactor with a total capacity of 211 liters manufactured by DE DIETRICH with jacket and agitation Model AE: removable top bottom Elements: Spotlight, Folding viewing peephole Volume Technical characteristics Model AE-160 Year of manufacture 1989 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Working pressure half-round/liner -1/+6 bar Working temperature of half round/shirt -25/+200 ºC Half-calf/shirt volume 58 L Equipment Setup Agitator Shirt Equipment dimensions Inner diameter 600 mm Body height 444 mm Transportation Information Length 910 mm Width 900 mm Height 2100 mm Weight 625 Kg In your state

Enameled reactor with a total capacity of 127 liters manufactured by DE DIETRICH with jacket and agitation ATEX marking: IIB T4 Model AE: removable upper bottom Elements: Tachometer rpm agitation ATEX spotlight Foldable viewing peephole. Discharge valve 0.86 kW motor - 1380 rpm i=24.46 reducer Technical characteristics Model AE Year of manufacture 1996 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Working pressure half-round/liner -1/+6 bar Working temperature of half round/shirt -25/+200 ºC Half-round volume/jacket 38 L Equipment Setup ATEX Agitator Shirt Transportation Information Width 800 mm In your state

Enameled reactor with a total capacity of 127 liters manufactured by DE DIETRICH with jacket and agitation ATEX marking: IIB T4 Model AE: removable upper bottom Elements: Tachometer rpm agitation ATEX spotlight Foldable viewing peephole. Discharge valve Motor of 0.75 kW - 1,400 rpm Reducer of i=15.84 Body Features Calculation pressure -1/+6 bar Test pressure 12 bar Calculation temperature -25/+200 ºC Capacity 117 litres Shirt features Calculation pressure -1/+6 bar Test pressure 9 bar Calculation temperature -25/+200 ºC Capacity 38 liters Equipment Setup ATEX Agitator Shirt Transportation Information Width 800 mm Height 2000 mm In your state

Enameled reactor with a total capacity of 127 liters manufactured by DE DIETRICH with jacket and agitation ATEX marking: IIB T4 Model AE: removable upper bottom Elements: Tachometer rpm agitation ATEX spotlight Foldable viewing peephole. Discharge valve Motor of 0.75 kW - 1,400 rpm Reducer of i=15.84 Technical characteristics Model AE Year of manufacture 1996 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Working pressure half-round/liner -1/+6 bar Working temperature of half round/shirt -25/+200 ºC Half-round volume/jacket 38 L Equipment Setup ATEX Agitator Shirt Transportation Information Length 1200 mm Width 850 mm Height 2100 mm In your state

Becomix laboratory homogenizer mixer model Beco mini used. Manufacturer: Becomix. Capacity: Maximum working capacity of approximately 5 Liters. Dimensions: 820mm x 820mm x 1250mm height approximately Pressure: -1/+1 bar maximum internal working pressure; 4 Bar maximum working pressure of the outer jacket Welded tapered bottom with a clamped plate lid. Pressure and vacuum sealing by means of double-acting axial sealing rings and cooled by barrier water flow. Bottom inlet homogenizer: Power 1.55 kW Torque 2.5Nm Transportation Information Length 820 mm Width 820 mm Height 1250 mm In your state

Stainless steel reactor from the TINSMACAL brand with jacket. Year 2006. On 3 labels. Cowles agitation of 230 mm diameter. Motor 2.2 kw 955 rpm 50 hz 220 v Equipment Setup Agitator Shirt About Labels Equipment dimensions Inner diameter 1000 mm Body height 1150 mm Transportation Information Length 2650 mm Width 1700 mm Weight 900 Kg In your state

TINSMACAL brand stainless steel reactor of 1200 liters. Year 2006. Three-blade helix agitation. Motor 2.2 kw 955 rpm 50 hz 220 v Manhole of 350 mm diameter. On 3 labels. Equipment Setup Agitator About Labels Stirring System Two-height three-blade helix agitation Equipment dimensions Inner diameter 1190 mm Body height 1400 mm Transportation Information Width 1800 mm Height 2750 mm Weight 980 Kg In your state

High-shear industrial mixer for continuous processes The DISPAX-REACTOR® is a new high-speed mixing, dispersion and homogenization equipment, designed for continuous processes in the chemical, pharmaceutical, cosmetic and food industries. It is especially suitable for demanding applications that require high shear, precise process control, and compatibility with corrosive products. Technical highlights Rotor speed: 10,800 rpm (50 Hz) Peripheral velocity: 40 m/s Maximum flow rate: approx. 2,500 l/h (water at 20 °C) Year 2024 Materials in contact with the product Stainless steel AISI 316L / AISI 316Ti FPM Elastomers (FDA) Designed for corrosive products and hygienic processes Professional sealing system Double-acting mechanical seal Pressurized Barrier Fluid System Continuous cooling and lubrication of the seal Increased safety, reduced maintenance an ...

Lleal Triagi 60 reactor of 60 useful liters with hydraulic power plant. Anchor-type agitation of inclined blades with scrapers and central shaft also with inclined blades rotating in counter-rotation. Lower emulsion turbine. Stirring motor 1.1 kw 1400 rpm 50 hz 220v Equipment dimensions Inner diameter 530 mm Body height 380 mm Transportation Information Length 1110 mm Width 800 mm Height 2050 mm Weight 700 Kg No documentation In your state

Kilolab reactor with a capacity of 20 liters. Unused manufactured in 2024. Working conditions: Working temperature -10/160 ºC Working pressure 8 mbar - 0.49 bar Max temperature. of the delta 100 ºC Shirt temperature -20/180 ºC Jacket pressure 8 mbar - 0.49 bar Material: 3.3 borosilicate glass Liner or mid-round material: Borosilicate glass 3.3 Unused

Reactor manufactured by BACHILLER with a capacity of 500 liters. Propeller agitation at different heights. Cowless agitation. No documentation In its state.

Mirror polished stainless steel equipment, specifically made of AISI 316L stainless steel, making it suitable for pharmaceutical processes for its corrosion resistance and ease of cleaning. Reactor description: Manufacturer: Tecnic Process Equipment Manufacturing, S.L.U. Serial number: 001791 Manufacturing date: 06/2020 Material: AISI 316L stainless steel Weight: 282 kg Useful volume: 114 L Maximum volume: 125 L Technical specifications: Design temperature (Body): 80°C Operating pressure (Body): -1 / 3 bar Maximum permissible pressure (Vessel): 4.4 bar Sleeve volume: 67.7 L Design temperature (Jacket): 80°C Operating pressure (Jacket): 0 / 1.5 bar Maximum permissible pressure (Jacket): 4.4 bar The reactor has a three-blade propeller type agitator, and is mounted on wheels for easy movement. In addition, labels on the nameplate indicate that the equipment is categorized for non-hazardo ...

PARKER PSA Nitrogen Generation Plant – 600 Nm³/h – 99.5% Purity (2016-2019) Complete industrial PSA Nitrogen Generation Plant designed for continuous 24/7 operation, producing high-purity nitrogen directly on-site. The plant is based on Pressure Swing Adsorption (PSA) technology and includes air compression, air treatment, nitrogen generation and storage systems, delivering up to 600 Nm³/h of nitrogen at 99.5% purity with fully automatic operation. Technical Specifications. • Technology: PSA (Pressure Swing Adsorption) • Manufacturer: Parker - Nitromatic • Nitrogen production capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum nitrogen outlet pressure: 7 bar(g) • Continuous operation: 24 hours/day • Fully automatic operation • Integrated alarm and monitoring system • Continuous oxygen analyser with purity display • Ultra-dry nitrogen produ ...