basic foodstuffs and animal feeds machines used for sale (505)

Record flowpacker, type: SCORPION E S., serial number: 09-06-612, year of construction: 2007, weight: 950 kg, 5 kW, distance between dividers: 300 mm, seal width: 350 mm, plastic belt, belt width: 210 mm, total dimensions: 6300 mm x 1500 mm x 2250 mm.

Sorma s.p.a. linear weighing machine, type: B14-126, serial number: 1036386, year of construction: 2008, weighing range: 40g-1kg, d=2g, temperature range: -10°C/+40°C, 14 lanes, lane width: (14x) 120 mm, dimensions linear weighing machine: 4150 mm x 2300 mm x 4100 mm, elevating belt, plastic belt with dividers, belt width: 500 mm, divider height: 50 mm, distance between dividers: 190 mm, elevating height: 3800 mm, dimensions elevating belt: 3200 mm x 950 mm x 4100 mm.

Veenstra Technology Mixer, type: FRR-100, machine number: 2022.044, weight: 38 Kg, with Depa air operated diaphragm pump, type: DH50-SS-2ET, serial number: 810959-1, total dimensions: 1170 mm x 750 mm x 1500 mm.

Record flowpacker with VWS Nederland B.V. labelling unit, type: PANDA.MD ST., serial number: 15-06-260, year of construction: 2007, weight: 1050 kg, distance between dividers: 410 mm, seal width: 350 mm, plastic belt, belt width: 210 mm, total dimensions: 6300 mm x 1500 mm x 2250 mm.

Kremer floor scrubbing machine, model: Ride on Scrubber Dryer KRFL110, serial number: 1307.1986-2025/42-043, batteries: 2x12V, 100Ah, brush speed: 200rpm, suction/brush motor power: 500 W/550 W, driving motor power: 500 W, running speed: 5.5 km/h max, recovery tank capacity: 75 litres, solution tank capacity: 70 litres, brush diameter: 560 mm, suction width: 800 mm, cleaning width: 560 mm, weight: 185 kg, total dimensions: 1400 mm x 800 mm x 1050 mm. Including battery charger. New.

Manter linear weighing machine, type: 16000 Mix, machine number: 211-273, year of construction: 2011, 16 lanes, lane width: (16x) 140 mm, 2 outfeed belts, belt width: (2x) 150 mm, dimensions linear weighing machine: 4800 mm x 3200 mm x 3150 mm, elevating infeed belt, 3 lanes, plastic belt with dividers, belt width: 445 mm, divider height: 40 mm, distance between divides: 240 mm, elevating height: 2900 mm, dimensions elevating belt: 5200 mm x 2400 mm x 3700 mm.

Manter linear weighing machine, type: 16000 Mix, machine number: 211-034, year of construction: 2011, 16 lanes, lane width: (16x) 140 mm, 2 outfeed belts, belt width: (2x) 150 mm, dimensions linear weighing machine: 4800 mm x 3200 mm x 3150 mm, elevating infeed belt, 3 lanes, plastic belt with dividers, belt width: 445 mm, divider height: 40 mm, distance between divides: 240 mm, elevating height: 2900 mm, dimensions elevating belt: 5200 mm x 2400 mm x 3700 mm.

Netzsch progressing cavity pump, type: NM063BY01L06B, serial number: D9446041/4300012937/0100, year of construction: 2022, 4.11 kW, capacity: 24 m³ per hour, dimensions: 220 mm x 350 mm x 450 mm.

MultiWeigh 16-heads multihead weigher, type: MW 16 2.0M 57° 3MIX, serial number: 0861, year of construction: 03/2015, dimensions: 1500 mm x 1500 mm x 2200 mm.

Multivac thermoformer, type: R530, dimensions dye: (8x) 78 mm x 325 mm, plastic belt, belt width: 378 mm, total dimensions: 7660 mm x 1040 mm x 1870 mm. Including Busch vacuum pump, dimensions pump: 1100 mm x 370 mm x 7200 mm.

Freshtech Solutions banding machine, model: Banderolmachine-enkelvoudig, machine number: 20047-01001-00, year of construction: 2021, 400 V, 50 Hz, plastic belt, belt width: 260 mm, clearance: ø 235 mm, total dimensions: 4000 mm x 1000 mm x 1850 mm.

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

Nauta Mixer MBX-6R All parts that come into contact with the product are made of stainless steel Swivel arm; Stainless steel Mixing screw; Stainless steel Container; Stainless steel universal joint; Stainless steel Condition: The mixer is not overhauled. We can also offer you a complete overhaul. A viewing is possible at any time.

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

Meijn MC2 selfemptying separator for eggs or eggshells. Cap max 30000 egg/hr. machine is in good condition.

Elevating belt with s/s frame and plastic belt, belt width: 530 mm, elevating height: 900 mm, total dimensions: 7000 mm x 700 mm x 1000 mm.

Elevating belt with s/s frame and plastic belt, belt width: 530 mm, elevating height: 900 mm, total dimensions: 7000 mm x 700 mm x 1000 mm.

Stork fence with 2 gates and security wire, model: B0181, type: 3781579, serial number: 10119253, year of construction: 2018, approximatly 13 meters of fench, including 2 gates.

Elevating belt with s/s frame and plastic belt, belt width: 530 mm, elevating height: 900 mm, total dimensions: 10000 mm x 700 mm x 1000 mm.

Marel Stork Poultry Processing B.V. meat harvesting line consisting of:RehangerThigh skin incision module, model: MX H1769, type: 1265800, serial number: 10120441, year of construction: 2014.Thigh deboner module, model: MX-R, type: 1217900, serial number: 400111/3400, year of construction: 1999.Thigh deboner module, model: MX-L, type: 1218000, serial number: 400111/3450, year of construction: 1999.Thigh meat harvesting module, model: MX-R, type: 4R 1229900, serial number: 400111/3500, year of construcion: 1999.Drumstick deboning module.Drumstick and whole leg meat harvesting module.Conveyor and shackles included.Footprint approximately: 10 m x 1.5 m x 2.1 m and 5 m x 1.5 m x 2.1 m.The factory runs this line at a speed of 4200 shackles per hour.Dismantling and loading is included in the price.

Marel Stork Poultry Processing B.V. meat harvesting line consisting of:RehangerThigh skin incision module, model: MX H1769, type: 3784569, serial number: 10119497, year of construction: RC2013.Leg skinning module, model: MX H1888, type: 3764570, serial number: 10118723, year of construction: 2013.Thigh deboner module, model: MX H1875, type: 3784572, serial number: 10119494, year of construction: RC2013.Thigh deboner module, model: MX H1875, type: 3784571, serial number: 10119493, year of construction: RC2013.Thigh meat harvesting module, model: MX H1878, type: 3784574, serial number: 10119491, year of construcion: RC2013.Thigh meat harvesting module, model: MX H1878, type: 3784573, serial number: 10119490, year of construcion: RC2013.Drumstick deboning module.Drumstick and whole leg meat harvesting module, model: MX H1887, type: 1316001, serial number: 10117916, year of construction: 201 ...

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

1. Slicer Treif Orbital divider 400+ Year of Make: 2017 Performance: Weight: L x W x H: Power supply: 400 V, 50 Hz Slicer for col cuts, cheese, etc. 2. Sharpening machine Treif HS Divider Orbital Year of Make: 2017 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. +48 33 812 58 60 inter-wiba.com.pl infointer-wiba.com.pl

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.