basic foodstuffs and animal feeds machines used for sale (505)

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

Large number of used food tanks at a special price! Steel tanks in good condition, above ground, standing on 6 bases. Contents: approx. 60 m ³ / 60,000 litres, coated inside Dimensions: approx. Ø 3.10 m x 8.50 m high, with base approximately 10 m overall height weight: 8, 0 t. The tank is lined with a high-quality, food-approved inner coating, see photo. Completely drainable, manhole, and more. Can be used for liquid fertilizer, as raintank, storage tank for water, for liquid feed, whey, animal feed, pig feed, stillage, potato steam skins, molasses, manure, AHL, ASL, seeping juice, canola oil, cooking oil. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has ...

Alfa Laval nozzle separated including cabinet, 2000, drive 135 kW. Technical specification Max throughput capacity 170 m3/h maximum nozzle flow 65 m3/h feed temperature range 0-100 o C Feed inlet pressure required Max180 kPa installed motor power 135

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

WEBER SCALE DATAPOND 85-AB Capacity 200 t / h complete pre and post container immediately available Mob. + 491715213204

ASPIRATOR / CLEANING OF GRAIN / 120 T / H CONVECTION 9.2 KW SCREEN DRIVE 3 KW IMMEDIATELY AVAILABLE MOB: + 49 171 5213204

Mixer/Agglomerator Type: Flexomix 160 in stainless steel

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

2 pieces of loading cells / storage cells 90 sqm3 Smooth wall with 2 funnels Dimensions: 2600 x 5200 x 6706 mm + funnel and substructure Exit slider 250 mm 250 mm Available Mob. +491715213204

Material: stainless steel V2A Engine: 0,25 kW Weight: 200 kg Length x Width x Height 1000 mm x 1000 mm x 900 mm Machine data: Machine in gas-proofed version, with rotating screen-frame; screening area per deck : 0,3 m². Optional: ballcleaning, sreen insert on choice : 0,1 - 2 mm. Very good condition. You can also get the entire system with all components.

VERTIGRAN ENTGRANNER Power 80 t/h 30 kw immediately available Mob. +491715213204

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

KEK Centrifugal sifter ideal for sifting and screening dry powders and other bulk solids, available with either 4mm or 6mm stainless mesh,

Damas Sigma 753 Grain cleaner. Total refurbished with new bearings. New brushes Sandblasted and painted. Comes with pulco, aspirator and valve

REF-2366 TATOMA MT-13-E HORIZONTAL UNIFEED MIXER 6000KG WITH LOAD CELLS Horizontal unifeed mixer for solids with load cells Manufacturer: TATOMA Type: MT-13-E Serial no.: 1000 Year: 1998 Capacity: 6,000 kg Volume: 13 m3 ABB motor: 75 HP/55 kW. 1,500 rpm Tank dimensions: length 4,450 mm, width 1,780 mm Outfeed height: 700 mm Overall dimensions: length 6,500 mm, width 2,300 mm, height 2,700 mm CE marking

Stephan universal kneader/mixer Model: VM150 Year 1997 Overall dimensions: Width 150 cm, length 100 cm, height 150 cm Power: 2.5 kW Revolutions per minute: 1,400 Mixing bowl dimensions: Diameter 65 cm, height 50 cm

Gericke CSM centrifugat rotary sifter Stainless steel Year 1998 CM 215009

We have for sale little used Hunan Fumach Twin screw extruder. This extruder has undergone a complete overhaul where all electrical wiring has been refurbished, ABB motors, Siemens logic, etc. The modification work has been done in Finland and the modifications have been given the CE mark. The extruder meets all the directives required by the EU Twin-screw Extruder FMHE72 which can be used for processing cereals, snack food, Nutrition, rice protein, reengineering, Starch gelatinization, caramel, rice products, pet food, Aquatic product feed, etc. Manufacturer: Hunan Fumach Foodstuff Engineering & tech. co. Ltd Type: FMHE-72-24 Year: 2017 Production capacity: 300-1200 kg/h Screw type: Twin screw, diameter 72 mm Screw length diameter ratio: 24D Screw rotation speed: 50—500r/min Screw torque: 2100N.M Oil pump motor: 1.1 kw Barrel temperature: -20-300℃ Die temperatu ...

GRACO pneumatic pump used in a pharmaceutical factory.

CHECKWEIGHING MACHINE

Size dia 1500x1900mm

round bread bread baking line, description: round loaf bread baking line; consisting of 1 stainless steel dosing machine brand Shadowtotal dimensions . approx. 1800x1100x1500mm; equipped with hopper and cutting machine; 400V; 1 conveyor belt, 5-storey; tire width approx. 350mm; total dimensions . approx. 6500x600x700mm; equipped with CPG induction motor; 1 stainless steel 2-piece flattener; 1 stainless steel 13-storey walkthrough proofer; tire width approx. 600mm; total length approx. 7500mm;

Pasteurisation unit with Frautech s/s heat exchanger, 3 centrifugal pumps, balance tank and pressure vessel, dimensions: 2550 mm x 1500 mm x 1900 mm.

7 s/s modular racks with wooden cheese boards, 11 floors, dimensions cheese boards: 2000 mm x 400 mm, dimensions racks: (2x) 6250 mm x 400 mm x 2140 mm, (2x) 6250 mm x 810 mm x 2140 mm, 8300 mm x 400 mm x 2140 mm, (2x) 2170 mm x 400 mm x 2140 mm.

S/s insulated tank with agitator, dimensions: ø 2000 mm x 3000 mm. Damaged.