Stainless steel tanks used for sale (20)

16,000 litre milk tank/ agitator tank / pre-stacking tank Properties: Volume 16000 L Material V2A (AISI 304) 1.4301 Total height 3500 mm Cylinder height 2800 mm Inner diameter 2900 mm Outer diameter 3100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Tank was used for the pre-stage of finished product. Topsoil: Inclined cone base 2 crane eyes CIP Cleaning Vent nozzle Thermometry Tank cylinder: insulated 6 cm Manhole 450 x 350 mm Agitator mixer Stelzer type DRK6P/12 with propeller CIP ball under the agitator Thermometry Level measurement Subsoil: Flat bottom with 3% slope Residual drain pipe with flanges Motor Tank 1/4 - Agitator to the left of Manhole Agitator Mixer Stelzer Type DRK6P/12 No.39139 IP44 Re Art. S1 7.571.5 kW 970/480 rpm 50 Hz 380 V  ...

3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom

10,000 litre storage tank made of V2A insulated horizontal Properties: Volume 10000 L Total length outside 4300 mm Length inside 3150 mm Cylinder length 3150 mm Total height 2600 mm Diameter 2000 mm Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Horizontal design Number of feet 6 Insulation 100 mm Description: Insulation 100 mm Tank crest: 2 connections DN 65 CIP Cleaning In front: Sensor for level measurement Flange DN 50 Manhole DN 500 round Sewage drain DN 150 with butterfly valve Remaining drain DN 50 + DN 65 Below: 6 trumpet feet fixed

3-storey tank / agitator tank / storage tank made of V2A 60,000 + 60,000 + 30,000 liters = 150,000 liters Properties: Volume 150,000 L Tank chamber 1 30000 liters Tank chamber 2 60000 liters Tank chamber 3 60000 liters Manufacturer: rind Milfor Total height 20000 mm Material V2A (AISI 304) 1.4301 Surface outside bright rolled 2b Surface inside bright rolled 2b Inner diameter 3650 mm Outer diameter 3750 mm Number of feet 6 Last use Acid, lye Weight 16000 kg Description Caustic Tank K1 Factory No. 3341 Ab. Re: Temp. 4÷ 95°C Insulation made of PU rigid foam panels Dimensions per hive tank: Tank chamber 1 for return water: Volume: 30,000 liters Height: 3,600 mm Inner diameter: 3,650 mm Tank Chamber Description: Cone bottom on topsoil N6 - Overflow DN 100 N2 - DN 300 Ventilation with vapour drain N3 - DN25 CIP with inlet pipe DN 50  ...

30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates

40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate

26,000 litre milk tank / agitator tank / storage tank made of V2A Properties: Volume 26000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Cylinder height 4500 mm Diameter 3400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Topsoil: Clapper bottom 2 crane eyes Level measurement 1/2" CIP line with CIP cleaning Tank cylinder: Manhole 450 x 370 mm Agitator mixer Stelzer type SN-63 H D2 - side with propeller (for tank ST2 right, for tank ST1 left) Socket 1/2" Subsoil: Clapper bottom with foot ring Outlet surround with flange connection Sensor for level measurement Important note: The agitator installed here contains a seal that must be protected from dry running.

52,000 liter agitator tank / storage tank made of V2A with cooling coil and insulation Properties: Volume 52000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 9100 mm Cylinder height 4500 mm Inner diameter 3650 mm Foot height 3200 mm Number of feet 4 Description: Topsoil: Clapper bottom 3 crane eyes Level measurement with socket 1/2" 4 reinforcement profiles on the agitator Agitator decentralised - engine horizontal CIP ball in the middle Dome with manhole Ø DN 600 with grille Threaded nozzle DN 65 in the cover Ventilator DN 700 with condensation drain Tank cylinder: Insulation 10 cm with diffusion-tight surface welded Cooling coil 3 x CIP balls on the edge with line on the tank body with 3 paddle steps with agitator blades in Z shape Immersion shaft sleeve with temperature display an ...

2 edible quark storage tanks with conical Spout and with intensive stirring with a mono pump for conveying into the Mixing and filling technology Tank capacity per tank: 1,300 kg Manhole above, agitator drive from above

1,000 litre hot water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm inner diameter 1000 mm Outside diameter 1120 mm Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2013 Design vertical Last use chemical industry Insulation 60 mm Operating temperature range 20-95°C Description MJ UNI-HIGH Topsoil: Flat floor with 3% slope crane eye Manhole DN 400 2 x connection CIP cleaning with line Connection Tank cylinder: Ladder hook Level measurement Underbody: Residual drain pipe with T-piece with 2 butterfly valves 3 fixed feet with domes

1,000 liter water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 1800 mm Cylinder height 1100 mm diameter 1000 mm Weight 170 kg Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2008 Design Vertical Last use chemical industry Description: MJ UNI-HIGH Topsoil: flat bottom Dome DN 400 Connection Underbody: Remaining process 3 feet with domes

Characteristics: volume 32000 L material V2A (AISI 304) 1.4301 Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Total height 7500 mm Cylinder height 4600 mm inner diameter 3400 mm Number of feet 4 Last use corrosive liquid Description: MJ UNI-HIGH Topsoil: dished end Wall thickness 8.3 mm 4 crane eyes CIP cleaning Manhole Filling nozzle pressure gauge Tank cylinder: Manhole DN 500 Clear drain connecting piece Wall thickness 2.4 mm Underbody: dished end Flange connection Residual drain with flanges 4 fixed feet with domes with reinforcement with lateral reinforcement Wall thickness 8.1 mm

Properties: Volume 35000 liters Total length 6500 mm Cylinder length 5500 mm Diameter 3400 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 200 mm Horizontal design Number of feet 6 Last use nitric acid - in dairy operations Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball 2 x Small Connectors Fill measurement connection In front: Manhole 520 x 410 with sample tap Filling line Flange Residual drain with outlet surround with disc valve DN 60 Below: 6 fixed feet with reinforcement ring

Properties: Volume 24000 L Year of manufacture 1976 Overall length 4400 mm Cylinder length 3400 mm Total height 4000 mm Diameter 3000 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball Cathedral In front: Manhole 520 x 410 with sample tap Filling line Flange 200/219.1 DIN2632 PN10 WNR 1.4541 68715 Residual drain with outlet surround with disc valve DN 60 Below: 4 fixed feet with reinforcement ring

Standing stainless steel tank with flat bottom Volume: 40,000 L Dimensions: Ø 3.00 × 6.00 m high The tank can be equipped with a new agitator or pump on request. Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: unknown Capacity: ~750 l Year of construction: 2000 Standing on 3 feet CIP-capable Manhole available Material: V2A / AISI 304 Condition: good

Size dia 1500x1900mm

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

stainless steel process tank capacity 0.25 m3 heating jacket thermal insulation stirrer for dense masses

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.