sheet metal working used for sale (3,327)

Offer 26008 Technical data: - 3 mot. driven rollers with asymmetrically hydr. Feeding of the two lower rollers - bends e.g. flat bars 100x40 flat up to Ø 600 mm - bends e.g. flat bars 100x20 upright up to Ø 800 mm - bends e.g. U 180x70 up to Ø 800 mm - Shaft diameter per 100 mm - Useful length of the standard shafts approx. 250 mm - Shaft rotation 5.4 rpm - Roller diameter 315 mm - Drive 400 V / 11 kW - With: - Separate control panel with digital actual value displays - Lateral straightening rollers manually adjustable - Standard bending kit for flat and angle material - Weight approx. 3500 kg - Space requirement approx. W 1600 x H 1700 x D 1600 mm

Key data: 6020 mm, 1 mm

with roller scissors and emergency stop rail Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 1.5 mm Sheet thickness max. VA 0.7 Projection 1000 mm Color: Green Total power requirement 16 A Dimensions 7000 x 1400 x 1400 mm Weight 3200 kg Upper beam stroke (opening width) 150 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Machine number 301644

Offer 26018 Technical data: - Max. working length 500 mm - Max. sheet thickness 1.5 mm - Various roller diameters - Drive – brake motor 400 V / 1.4 kW - Space requirement approx. W 850 x D 1700 x H 1250 mm - Weight approx. 0.8 t - Roller attachments 42 ; 45 ; 50 ; 55 ; 60 ; 65 ; 70 ; 90 ; 135 mm

Key data: 1020 mm, 2 mm

with bending rail 10 and 19 mm, additional segment insert for the upper beam (segment height 60 mm) and Material thickness adjustment, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: green Machine weight: 350 kg Opening width: 150 mm Bending angle (max.): 130 degrees Machine number 16/9

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Key data: 1020 mm, 1 mm

3-roll round bending machine, with wire inserts, seam groove, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness max. steel: 1.25 mm Colour: green Weight: 220 kg Dimensions: 1290 x 600 x 1050 mm Number of round rollers: 3 pieces Roller diameter: 55 mm Machine number 1685

Qty. 1 Second-hand complete Copper Strip Production Plant Mfc.: Shinkwang Tech, Waterburry Farrel, Rozai, Handuck, Mirae, Wuishi, Youngchang, Sundwig, Sonoda Eng., Wuxi Longar Mach., Backsan Mach., Deakwang Mach., Hankug Eng., Intrize, Samjung Built: 1960 – 2020 Material Width: 650 mm Thickness Entry: 12 mm Exit: 0.05 mm Consist of: Break Down Mill Intermediate Mill Finishing Mill Annealing Coil Built-Up Line Roll Grinder Pickling Degreasing Buffing Tension Leveller Slitters (3) Precious Slitter Drum Cutters (2) Scrap Shears (2) Cut-to-length (2) Packing Machine Draw Bench Machine

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Belt width 1,500 mm, strip thickness 0.5, - 2.0 mm, coil weight 7 tons, straightening rollers 7 pcs. , Longitudinal sliced 4 x , Coil inside diam. 508 mm, coil outer diam.1,600 mm

Strip width 1,500 mm, strip thickness 0.5-1.5 mm, coil weight 10 tons. Longitudinal sections 4, straightening rollers 7, coil inside diameter. 508 mm Coil Outside Diam. 1,600 mm

Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail and machine in top condition Weight: approx. 3000 kg

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

Offer 26046 Technical data: - 2 mot. Driven rollers - Manual. Lining of the upper roller - Shaft diameter 30 mm - Shaft rotation 6 rpm - Roller diameter 88 - 108 mm - Bending capacity approx. - Flat steel 50 x 8 mm - Square 20 mm - Round tube 42 mm - Drive 380 V / 0.55 kW - with: - Right / left – run - Tube roller set approx. 16 mm - Weight approx. 150 kg - Space requirement approx. W 650 x H 1300 x D 950 mm

sheet width - max.: 0410 mmcoil weight: 2,0 tcoil internal dia.: 380 - 520 mmcoil outside - diam. ca.: 1400 mmtotal power requirement: 2,2 + 1,1 to kWweight of the machine ca.: tdimensions of the machine ca.: mwith take-off deviceSpace requirement reel (W x D x H) 1.40 x 1.60 x 2.20 mSpace requirement complete (W x D x H) 2.60 x 1.20 x 2.30 mUnwind reel 2370 DFPSwithout drive, with pneumatic overrun brake, hydraulic central spreader, pneumaticpressing deviceTake-off device / hydraulic threading aid 235 Dwith infinitely variable drive,belt loop control via ultrasoundMaterial thickness up to approx. 6.0 mmTake-off roller diameter approx. 160 mmAs it stands and lies, WITHOUT being put into operation,Design as described in the technical data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 3,00 tdimensions of the machine ca.: mControlled backgauge up to 1000 mmSide fence and table extensionsCut length limiterCut edge lightingSharpened bladesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0800 mmcoil weight: 3,50 tcoil internal dia.: 460 -530 mmcoil-outside of decoiler: 1400 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 1,60 x 2,20 x 2,60 mwith hydraulic auxiliary drive, pneumatic lag brake, hydraulic centralized expansion, hydraulic snubber rollAs is, without commissioning / without further work,Design as described in the technical data sheetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0850 mmcoil weight: 5,00 tcoil internal dia.: mmBelt thickness: 1,00 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mIncluding coil lifter, feed unit, control panel, hydraulic unit, control cabinetThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.

Profile height 25 mm, with hydraulic transverse cutting device for short shares, with 45 degree transverse separation device for inclined coulters Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Sheet width: 250 - 870 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminum: 0.8 mm Sheet thickness stainless steel: 0.5 mm Machine weight: 420 kg Dimensions: 1250 x 1470 x 1100 mm Total power requirement: 400 V Colour: blue Profile height: 25 mm Infeed width: 290 - 880 mm Roll forming speed :11 m/min Strip width: 290 - 880 mm

Max. bending length: 2540 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Manual and automatic mode possible Motorized adjustable back gauge with spring fingers and digital display Central lubrication Segmented upper and lower beam rail for 2050 mm 5600 kg

PLASMA CUTTING MACHINE Machine data Machine name plasma cutting machine Year of construction 2010 Condition Used Location Technical details Functionality fully functional Total weight 4,000 kg Cutting height (max.) 200 mm Input voltage 400 V Workpiece weight (max.) 3,800 kg Cutting current 280 A Sheet thickness (max.) 40 mm Sheet thickness steel (max.) 40 mm Table length 6,000 mm Table width 2,000 mm Working range 6,000 mm Description Plasma cutting machine with suction, dimensions 6000 x 2000mm Voortman VACAM VCS Thermo Plasma cutting machine Kjellberg HiFocus 280i Plasma gas control unit FlowControl 3 Cooling unit KWE 360 Cutting current 10 - 280A Smoke exhaust system Teka Filtercube 4 H Year of construction 06/2013 Filter inserts 4 Integrated blower Motor power 7.5KW The facility is in a 100% functional condition

00905 Designation of the scissors system Manufacturer: Finnpower Model SG6 12.13 Year of construction 2008 Operating hours: (as of Feb 2026) 42,340 h Power on time 6462131min Running time 2540410min Alarm time 2187771min Control Finnpower ICP1 Machine weight 28,000 kg Punching force 300 kN Cutting force 250 kN Max. operating pressure 300 bar Note: Tapping unit without function The SG6 turbine is currently connected to an LP6 Finnpower plant. The SG6 is converted into a stand-alone machine. So that the SG6 can also work independently on its own. The SG6 scissors are also currently connected to a Night Train storage system together with the LP6. (the LP6 layout and Night Train storage system will be dismantled on March 30, 2026) SG6 12 13 3 x 400 V 50 Hz 3 x 80 A Lcu 25 kA Condition Good condition Dismantling March 30, 2026

This AGTOS blasting system was manufactured in 2018. Designed as a deburring machine, it efficiently removes burrs from various materials, enhancing surface finish and part accuracy. Ideal for operations requiring precise deburring. Contact us for more information about this machine.

This BLEMAS EURO 160 press brake was manufactured in 1993. It features a press force of 160t and a bending length of 3m. The stand passage is approximately 2.5m, and it is equipped with a Cybelec control system. The machine is ready for immediate use, with cylinders that have been re-honed and sealed. Contact us for more information about this machine.

This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information.

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine.

This 3-axis Bystronic BySprint Fiber 3015 was manufactured in 2016, designed for precision fiber laser cutting. It handles a nominal sheet size of 3000 x 1500 mm and supports a maximum workpiece weight of 890 kg. The machine dimensions are 11,000 mm in length, 6,050 mm in width, and 2,565 mm in height. If you are looking to get high-quality cutting capabilities consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for more information.

This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW.

This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine.