sheet metal working used for sale (3,304)

Key data: 30 mm, 30 mm, 80 mm

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop

Large working width: 4000 mm for sheet metal with a strength of 40 kg up to: 3 mm Table width: 470 mm Back gauge adjustment: 1000 mm Fixed cutting angle: 1°30' Column projection: 200 mm Hydraulic drive: 380 V, 7.5 kW Space requirement: 4650 x 1830 x 1420 mm high Weight: 5.7 t

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm -Weight: 13.5 kg/pc.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Manual length adjustment via handwheel with digital display For mounting on any Elumatec single-head saw (left) Max. feed length: 3,000 mm Pneumatic Locking Brake

Tool trolley, workshop trolley, transport trolley, table trolley, sliding trolley, material trolley -Material trolley: 2 pieces with swivel casters, used for EHT guillotine shear -Car1: 1100/1010/H530 mm weight 67 kg -Car 2: 1400/1050/H390 mm Weight 107 kg -Swivel casters: 4 each -Submission/Price: complete -Transport dimensions: 1400/1105/H700 mm -Weight: 174 kg

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Qty. 1 Second-hand slitting line Mfc.: LOOPCO Built: 1976 Stopped: 2024 New make Recoiler, Slitter Arbor, Deflect roller and others parts revamped by expert company. Strip Width: 1300 mm (Untrimmed) 1250 mm (Trimmed) Thickness: 0.3-3 mm Coil Weight: 15 tons Coil ID: 508 /610 mm Recoiler: 508 mm Slitter stand: 270 mm dia Material: Cold rolled steel Line Length: 12 meter Width: 8 meter

Die holder, notching tool, punching tool, punch, punch die, punch stamp -Punch tool: Ø 23.5 mm -Hole: Ø 122 mm -Matrix: Mounting diameter 70 mm -Overall dimensions: Ø 122 x 172 mm -Weight: 3.8 kg

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Hydropneumatic mode of operation Punching force: 50 kN Working stroke: 35 mm Projection: 110 mm Installation height: 140 mm

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool-Punching tool for: holding matrices-Bore diameter: 70 mm-Dimensions: 220/317/H115 mm-Weight: 32 kg

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Clockwise and counterclockwise rotation Weight: approx. 500 kg Other castor sets on request

Automatic feed via Elgo control system E 255 For mounting on any Elumatec single-head saw (right) Max. feed length: 3000 mm

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Tool: for press brake, base for press brake tool -Dimensions: see drawing in the photos -Dimensions: 2500/70/H22 mm -Weight: 26.1 kg

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Tool trolley for bending tool, die, upper knife, upper tool, straight tool-Tool trolley for the: Tool for a press brake-with several compartments-Dimensions: 1165/720/H1000 mm-Weight: 208 kg

Bending tool, die, upper knife, upper tool-Tool: for press brake, 9 pieces-Dimensions: 95 x 31 mm-Total length: 5005mm-Dimensions: see the drawing in the photos-Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each-Transport dimension: 835/210/100 mm-Weight: 86 kg

Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket-Handover: in the current condition as viewed-Punch bracket: as shown in the pictures-Manufacturer: CEWE-Type: PA35-150 1GN2 N05-Projection: 150 mm-Dimensions: 270/70/H130 mm-Weight: 8.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch,-Manufacturer: Mubea, punching tool Ø 60 mm-Type: Mubea 60 holder Ø 50 mm-Die: Ø 150 mm-Total dimensions: Ø 150 x 120 mm-Weight: 6.6 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminal available -Weight: 28 kg

Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -Lift-down device: -Overall dimensions: 295/125/H865 mm -Transport dimensions: 690/125/H310 mm -Weight: 11 kg