sheet metal working used for sale (3,313)

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 €: 603.94 €: 0.4 - 2 mm: 600 mm: 1200 mm²: 80 mm: 75 m/min: 10 m/s²: 10 Nmhelical gear boxWATTDRIVE (Made in Austria)FESTO pneumatic equipmentservo drive and control SIEMENS7", colour touchscreen SIEMENS2 driven rollsOPTIONAL EQUIPMENTHandrwheel and Simlinx remote control € 4.290,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 1500 mm: 6 mm: 6 mm: 4 mm: 5 mm: 4 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movement of  ...

Please note! The available forklift cannot load this machine, please bring your own suitable resources Auction-ID: A1-45188-1

Metalworker Auction-ID: A1-45188-136

Working width 100mm. Auction-ID: A1-45188-85

Auction-ID: A1-45188-231

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

Auction-ID: A1-45188-30

: neu : ca. 6 Monate ab Auftragse : Taiwan : 47600 €: 909.16 €: 3100 mm: 2.5 mm: Hydraulisch : 135 °: 4300 mm: 1770 mm: 1890 mm: 4000 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rulesALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mm (sample photos)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Finn-Power A5-25 FB Punching Machine Type: Punching machine Manufacturer: Finn-Power Model: A5-25 FB Year of manufacture: 1999 Punching capacity: 23 t Max. sheet thickness: 4 mm Approx. machine weight: 12,000 kg Approx total dimensions (L x W x H): 6000 x 6000 x 2000 mm X/Y-axis feed rates: 2500/1250 mm JETCAM software Tools: Included Brush table Max. hydraulic pressure: 300 bar Power supply: 3 x 400 V, 50 Hz Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-6

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24200 €: 464.64 €: 80 to: 750 mm: 40x14 mm: 40 1/min: 9 kW: 1700 mm: 1300 mm: 2050 mm: 1715 kghydraulic drivetable with gaugeuser manual in GERMAN and ENGLISHCNC options on requestWe have a big stock of punches and dies for immediate dispatchWE HAVE MORE THAN 700 REFERENCES!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 28 mm: 28 mm: 22 mm: 26 mm: 23 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movemen ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 56100 €: 1060.29 €: 2540 mm: 3.5 mm: Hydraulisch : 135 °: 3 kW: 3850 mm: 1700 mm: 1860 mm: 3700 kgNC control for bending anglemanual back gauge 600 mmhydraulic drivenvertical movement of upper beamsegmented bladesegmented goose neck rail 30°, 110 mm with quick tool change systemone piece flat bottom bar 30 mmaccording to CE rules(sample photo showing model V-AMH 2535 2 axes NC control)OPTION:2 axes NC control with touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 6400 mm: 2 mm: 2 mm: 1.5 - 2 mm: 7 : 7 : 1000 mmfully automatic bending in two ways without the need to rotate the sheethydraulic driveBMS MULTI-Touch with automatic depth stoppowered rotary shearadditional rail on the bending beammaterial support2x foot pedalsafety equipment accoring to the control rules BG Germany3 year warranty on stands and tension arms.Quality Made in Germany.FURTHER MODELS FROM3 UP TO12 M LENGTH AND FROM 1,25 MM UP TO 2,00 MM BENDING CAPACITY ON REQUEST.OPTIONS: Preserving material support made out of synthetics price on request Hydraulic radius adjustment (air gap adjustment)the bending capacitiy of aluminium rises up to 2,5mm price on request Extended depth 20 - 1.250 mm price on request Conical depth stop to bend conical profiles andnarrow/wide bendings for easy intermateing price on request Fully automatic grip ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 5020 mm: 1.5 mm: 2 mm: 1.5 mm: 6 : 6 : 1130 mm: 180 mm: 915 mm: 4 kW: 6200 mm: 1435 mm: 1980 mm: 3200 kg: 145 °hydraulic drivestandard controladditional rail on the bending beam2x foot pedalremoveable material supportsafety equipment accoring to the control rules BG GermanyOPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany.Transport and commissioningat customers place on request.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27800 €: 530.98 €: 3030 mm: 4 mm: 4 mm: 2 mm: 180 mm: 4 kW: 4600 mm: 1120 mm: 1020 mm: 4250 kg3 rollsAsymmetrical rolls arrangement - with pre-bending2 driven rollsMotorized adjustment of lateral and clamping rollDigital read-out for lateral and clamping rollSwiveling top roll to the frontForward/reverse runHardened rollsMoveable control panelUser manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 €: 831.81 €: 1550 mm: 12 mm: 12 mm: 10 mm: 10 mm: 8 mm: 220 mm: 200 mm: 160 mm: 1,5 / 6 m/min: 5.5 kW: 3900 mm: 1150 mm: 1250 mm: 3600 kg4 rollsTop rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan systemPinch roll and latereal rolls move with hydraulic cylindersDigital read-out for lower and side rolls positionHardened rollsConical bending deviceHydraulic load relieving of upper rollHydraulic drop-end bearing2 working speedsProtectionagainst overloadMoveable control paneAccording to CE rulesOPTIONAL EQUIPMENT:Infinitely adustable speed of rollsHydraulic side supportHydraulic top supportNC controlIMPORTANT ISSUES AT CONICAL BENDING:The max. sheet metal thickness isequivalent to 50 % of nominal capacityThe cone length can be max. 30 % oremust be more than 60 % of roll lengthHardened rolls are rec ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm: 18 mm: 18 mm: 12.1 mm: 15 mm: 13 mmHardened and polished rollersNumerical control Siemens PGS-Classic with touchscreenCone bending with electronic control and inclination of the bottom rolleroil coolerSimultaneous rotation and roller movementSimultaneous roller and support movementPossibility to bend variable radii (ovals, ellipses, etc.)Hydraulic micro-positioning by the PLC for higher accuracyInfinitely variable speed for roller movementInfinitely variable speed for rotationPrepared for retrofitting supports (up to 5 axes)Prepared for retrofitting loading/unloading stationsPrepared for retrofitting CNC controlsExtra large, double hinged drop endElectronic parallelism system for the synchronization of the rollersHydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more)Double linear guide for the movem ...

: bending speed: U/min: : 2 mmdimensions of the machine ca.: 1,3 x 0,8 x 1,3 mmweight of the machine ca.: 250 kgEquipment/Accessories:- Foot switch- Mobile standIncludes a wide range of bending toolsSee imagesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mmplate thickness: 1,5 mmdistance between columns: 1300 mmdaylight opening: 80 mm: 155 °total power requirement: Handbetrieben weight of the machine ca.: 0,18 tdimensions of the machine ca.: 1,4 x 0,8 x 1,3 mSegment-bending machineSegment widths:2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mmplate thickness: 3,5 mmdistance between columns: 2050 mmdaylight opening: 355 mmtotal power requirement: kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 3,5 x 1,5 x 1,5 mBending machine- Bending angle preselection via limit switchesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 4 mmweight of the machine ca.: 5.000 kgdimensions of the machine ca.: 3000 x 2000 x 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stationary punching machine W. Meitinger \"Record\" from 1966. Machine is suitable for stamping and machining metal parts. Classic workshop machine with mechanical drive via electric motor and belt. Ideal for workshops, metal construction or as a robust industrial machine. Auction-ID: 04J-7G3-1

: neu : ca. 12 Wochen ab Auftrags : Türkei : Wechseltisch Laser sources from 3 - 30 kWTable dimensions:3 x 1,5 / 4 x 2 / 6 x 2 / 6 x 2,5 mThe shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems.The system consists of the following components:Shuttle table system in longitudinal direction for simultaneous loading/unloading and cutting to reduce non-productive production timesEncapsulated cutting room with protective glazingCNC graphics control Siemens Sinumerik 840DLaser source Brilase or IPGCutting head with automatic focus adjustment, Durma or PrecitecCooling unit for cutting head and laser sourceCAD/CAM software LANTEK for programming including autonestingPositioning laserSheet check system (automatic detection of sheet position and dimensions)Automatic nozzle cleaningCentral lubricationSlug boxWorking ...

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 €: 1 : 2040 mm: 3 mm: 2 mm: 4.5 mm: Motorisch : 1.5 kW: 1.1 kW: 3060 mm: 1650 mm: 1500 mm: 2730 kg: 750 mm: 140 mm: 50 °/sekCNC control ECT (Schneider Magelis)- Input of bending angle, depth stop dimension, lifting height, folding, precut- max. 36 bending angles can be saved per set- max. 510 sets can be saved- comfortable 7.5", color touch TFT monitor- Power mode for material-friendly operation- Soft start of the bending beam and the depth stop- Visual user guidance in the event of faults (diagnosis center)- Selection of different languages such as German, English ...CNC back gauge- Back gauge range 6 - 750 mm- Drive via belt- 6 stop fingers- support plates with brushesSectioned goose neck rail height 75 mmAdditional 10 mm rail on the bening beamFlat rail R 1 mmFlat rail R 2 mmMechanical drive via gear  ...

pressure: 70 -800 kNchamfer lenght: 2505 mmdistance between columns: 2125 mmControl: OP 2000 controlled axis: 7 throat: 420 mmstroke: 200 mmdayligth: 470 mmNumber of working hours: htable width: 60 mmtable height: 960 mmajustment speed: 100 mm/secworking feed: 10 mm/secreturn speed: 100 mm/secweight of the machine ca.: 6,3 tPatented Amada technology ensures absolutely correct bending results withoutbombing deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmtable width: 120 mmtable height: 900 mmcolumn arm: 320 mmreturn speed: 100 mm/secworking feed: 10 mm/seccontrol: Cybelec DNC 70 quantity of oil: ca. 250 ltotal power requirement: 11 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille)Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 6,0 mmdistance between columns: 3000 mmcutting angle: 0,5 - 3 °no. of strokes: 9 / 14 Hub/mindown holder: 18 total power requirement: 10 kWweight of the machine ca.: 4800 kgdimensions of the machine ca.: 3750 x 1600 x 1650 mmFeatures:- Hydraulic / slide-guided sheet metal guillotine shears- Electric backgauge 10-750 mm- Electric cutting angle adjustment- Manual cutting gap adjustment- 1x side stop- Front finger guard- Foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3060 mmplate thickness: 6.0 mmthickness at Niro-steel: 4.0 mmdistance between columns: 3100 mmdown holder: 16 Stückno. of strokes: max. 10 - 15 Hub/minoil volume: 160 ltr.cutting angle: 1.6 °back stop - adjustable: 6.0 - 750 mmControl: ELGO P9521 total power requirement: 18.5 kWweight: 6300 kgrange L-W-H: 3900 x 2300 x 1630 mmFeatures:- Robust electro-hydraulic swing beam shear- ELGO digital display model P9521, for electric backgauge Backgauge travel X = 750 mm Backgauge-free ball screw drive Travel speed 100 mm/s- 1x stable side stop With T-slot, flip-stop, and millimeter scale- 2x stable front support arms- Electric cutting length limiter Cutting length limiter to increase the stroke rate/min.- Manual cutting gap adjustment Centrally operated on the right side stand- Front support plates- Front finger/interference guard- Inching operation with push buttons on the left c ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 39000 €: 744.9 €: 2035 mm: 2.5 mm: Hydraulisch : 135 °: 3000 mm: 1100 mm: 1750 mm: 2100 kghydraulic drivenNC control for bending anglemanual back gauge 600 mmsharp rail 45° (in one piece)front angle beam 75 mmmechanical stop adjustment of upper beamclamping force adjustment of upper beamaccording to CE rules(sample photo)ALTERNATIVELY:versionAMH-K,withSECTIONEDsharp rail 45° OPTION:2 axes NC control with 7", touchscreen incl. motorized back gauge 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.