presses used for sale (1,650)

Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.

Compressive force: 170 t Spindle Ø: 160 mm Table support surface: 700 x 900 mm Plunger area: 500 x 800 mm Gr. Distance between table and plunger: 450 mm Drive motor: 380 V, 11 kW Weight: 8200 kg

Specifications: - Hole diameter approx. 44 , 45 , 48 , 52 , 2 x 55 , 2 x 58 , 61 , 66 mm 2 x 68 , 2 x 80 , 81 , 85 mm - Long hole dimension approx. 12 x 42 , 12 x 50 , 18 x 55 mm - Stamp holder 58 mm - Stamp height 54 + 58 mm - Adapter ring for stamps - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for matrices 90 - 140 mm - Weight approx. 90 kg

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

pressure: 300 tworking feed: 9 / 14 mm/secstroke: 600 mmcolumn daylight: 1550 mm: 600 adjustment of press crosshead: 1500 mmslide adjustment -horizontal: 3000 mmtank capacity: lfeed speeds: 9 mm/secreturn speed: 14 mm/sectotal power requirement: 18,5 kWweight of the machine ca.: 35 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 tdistance between columns: 2650 mmstroke: 500 mmcolumn travel -side: 500 x 1000 mmdiameter of piston: 710 mmnumber of pistons: 2 distance between table / ram: 1000 mmoperating pressure: 130 / 230 bardayligth: 800 mmtable length: 2500 mmtable width: 1600 mmtable height: 250 mmdraw back pressure: 500 kNnumber of T-slots: 8 turning speeds: 1500 U/minrapid speed: 120 - 140 mm/minclosing speed: max. 120 - 140 mm/sec.hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/seccutting sound absorber: 300 tdie cushion capacity: 200 tdie cushion stroke: 250 mmspeed of die cushion: 100 mm/secvoltage: 380 Vfrequency: 50 Hzquantity of oil: 2000 ltotal power requirement: 93 kWweight of the machine ca.: 90 tdimensions of the machine ca.: 5000 x 2500 x 7200 mmtransport measurements: ca. 6500 x 3750 x 2190 mm1991 assembly of a die cushion, pressure reducti ...

pressure: 17,0 kNstroke: 60 mmthroat: 105 mmWorking height from to: 75 -180 mmtable surface area: 170 x 130 mmspindle diameter: 25 mmweight of the machine ca.: 35 Kgdimensions: 260 x 130 x415 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1,5 kNstroke: 40 mmthroat: 70 mmWorking height from to: 75 - 170 mmtable surface area: 115 x 70 mmweight of the machine ca.: 11 Kgdimensions: 115 x 175 x 290 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 17,0 kNstroke: 40 mmthroat: 110 mmWorking height from to: 70 - 220 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 60 Kgdimensions: 310 x 190 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tpassage width: 1000 mmstroke: . mmwidth: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 tspindle diameter: 160 mmram stroke range: 180 mmstroke speed: 71 Hub/mincolumn daylight: 450 mmtable surface area: 560x450 mmram surface: 450x400 mmtotal power requirement: 12 kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 300 mmCylinder: 205 MMdistance between table / ram: 520 mmtable surface area: 1100X350 mmram surface: 350X350 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: manuell tdistance between columns: 50 mmdayligth: 50 mmtotal power requirement: kWweight of the machine ca.: 0,01 tdimensions of the machine ca.: 0,3 x 0,3 x 0,3 m• 4 units available,• bore at bottom, Ø 10 mm,• thread in spindle M 6,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3000 mmdistance between columns: 2560 mmdayligth: 450 mmthroat: 450 mmadjustment of stroke: 240 mmhorn length over column outer edge each: 175 mmtable length: 3050 mmtable width: 280 mmtable height over floor: 820 mmelectrics - voltage/frequency: 220/50 V/Hzcontrol: CYBELEC, DNC60 stroke: 250 mmoperating pressure: 150 bartotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m• hydraulical press brake, • new control CYBELEC DNC60 (in 2005),• lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support,• prism and upper part of the machine in 3000 mm lengthThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tthroat: 800 mmstroke: 630 mmdistance between table / ram: max. 1000 mmram head dimension: 710 x 600 mmtable-size: 800 x 1200 mmwork height max.: 1015 mmquantity of oil: 1100 lNumber of working hours: 7663 hweight of the machine ca.: 15 tdimensions: ca. 1600 x 2200 x 4800 mmdimensions of switch cabinet: ca. 1200 x 400 x 1800 mmTested for function. During the test run it is noticed that the press ramnot 100% leak-proof.In addition, the cable for manual operation was mended several times.Upper cover is missing, since this was dismantled by the customer due to crane use.Operating instructions and electrical plans available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 0 mmstroke: 160 mmtable surface area: 630 x 500 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

closing pressure: 4360 kNtable-size: 730 x 730 mmcontrol: B+R Industrieelektronik draw back pressure: 190 kNajustment speed: max. 60 mm/secreturn speed: max. 90 mm/secdaylight between the columns: 900 mm= vulcanizing press with vertical closing unit, with form removal and form separation deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeu ...

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t