presses used for sale (1,650)

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

The small laboratory press MHSP5 can perform very well with the round stamp (70 mm diameter) deformations of many materials. By delivering fine (0.5 mm per wheel revolution), deformations are carried out very accurately. Small punching or stamping operations are possible. The press is driven by a worm gear screw jacks, which requires minimal hand strength by high reduction ratio. The pressing frame consists of stable-dimensioned polyamide PA6G. Here are some technical data:-static force 5 KN (0.5 to) - portable presses frame made of polyamide PA 6 G, very stable design, with FEM program added - spindle manual jacks 20 mm, pitch 5 mm - with Handwheel diameter 120 mm and handle - gear ratio 1:10, per the Handwheel 0.5 mm screw - table size 235 195 mm - clearance width 190 mm - stamp size diameter 70 mm with 4 holes 8 mm for mounting a major stamp Very easy operation with spindle and w ...

Bruderer BSTA 18 600 spm High-performance speed from 100-600 spm Force Max 180 KN Adjustable stroke New Silicon control Pneumatic and hydraulic all new Strip width max 190 mm Feed Bruderer BBV With digital stroke counter with programmable auto stop and digital speed counter Overhauled, very good condition, ready to work.

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84

Hydraulic Horizontal Straightening Press, used Horizontal multi purpose press, used type: HHP160 max. pressing force/ max. tonnage: 160 t Year built/ year of make: 1965 Manufacturer/ make: Pellissier Hanau max. pressing force/ max. tonnage: 160 t Piston stroke/ stroke of plunger: 400 mm Piston diameter / diam. of piston: 300/ 185 mm Extension / depth of throat: 225 mm Table size/ table size: 1150 x 350 mm Pressing speed/ speed of pressing: 16 ... 6 mm / sec Advance/ advance: 75 mm / sec Return/ rapid return: 208 mm / sec Installation width between Kobendruckstück and traverse pressure pieces/ distance between plunger with ram and locators: 320 mm Distance of the pressure pieces on pistons or table / distance between locators of piston and table: 50 ... 888 mm Total p ...

Hand spindle press, used Balancier, used Type: PSHZ 25/I Pressing force / rated pressure: 25 t Stroke/ stroke: 250 mm Table size/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Table opening / hole in table: 140 mm Weight: 0.9t

Extension / distance slide center to frame: 320 mm Sheet thickness / sheet thickness: 3.2 mm Cutting surface / cutting capacity: 1600 mmx2 Distance table pestle/ distance table slide: 417 mm Stroke adjustment / adjustment of stroke: 16...125 mm Stroke number/ number of strokes: 45 / min Pestle adjustable/adjustment of slide: 80 mm Table size / surface of bed: 800 x 630 mm Bumper size / surface of ram: 500 x 400 mm Slope of the stand / inclination of coulmn: 25 Power of main motor power: 4 kW Weight: 2.5 Specification: C-frame punching press, used

Stock number: 3855 ECCENTRIC PRESS Manufacturer: PMB, Type: EPF 64 Machine NO.: 744103, Year of manufacture: 1974 Specifications: Gr. pressing pressure 64 to Table size 520 x 700 mm Stroke length 8-96 mm Projection 265 mm Total power 5.5 kW Control Fabr. Pneumatic clutch. Length: 2000 mm, Height: 2500 mm, Width: 1200 mm, Weight: 4000 kg

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

Stock number: 3768 CNC PRESS BRAKE Manufacturer: DONEWELL, Type: 100 x 3000 Machine NO.: 588 12 2348, Year of construction: 1988 Specifications: Size bending length 3100 mm Size Printing capacity 100 tons Stroke length 215 mm Stand passage 2600 mm Projection 265 mm Bending speed 420 mm/min Hydraulic. CNC control Cybelec EURO III Fabr. Controlled in Y1-Y2-X Achen Program-controlled backgauge. X - 500 mm Accessories: Segment-split upper tool 3100 mm Multi bottom tool 3100 mm Operating manuals Length: 1300 mm, Height: 2450 mm, Width: 3100 mm, Weight: 7000 kg

Stock number: 3754 HYDRAULIC PRESS Manufacturer: STENHOJ, Type: 25T TE Machine NO.: 54718, Year of construction: 1988 Specifications: Table size 620 x 380 mm Stroke length 300 mm pressing force 25 ton Weight: 1600 kg

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 130 toPRESS TABLE  table surface (left-right): 1200 mm  table surface (front-back): 700 mm  thickness of bolster plate: 80 mmSLIDE  table surface (left-right): 750 mm  table surface (front-back): 550 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 100 mm  stroke min.: 19 mm  stroke max.: 165 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 525 mmELECTRICAL SPECIFICATIONS  total power consumption: 11 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 1685 mm  space requirements -front/back-: 1910 mm  total height: 3340 mm &nb ...

PRESS DESIGN  drive system: eccentric / crank   table cushion: yes PRESS FORCES  total force (nominal): 100 to  nominal work capacity: 1000 kNmPRESS TABLE  table surface (left-right): 1100 mm  table surface (front-back): 660 mm  thickness of bolster plate: 100 mmSLIDE  table surface (left-right): 640 mm  table surface (front-back): 420 mm  spigot hole diameter: 50 mm  stroke: 130 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 110 mm  stroke min.: 20 mm  stroke max.: 130 mmDIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 450 mm  distance table - slide max.: 580 mmELECTRICAL SPECIFICATIONS  total power c ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 40 toPRESS TABLE  table surface (left-right): 650 mm  table surface (front-back): 380 mm  thickness of bolster plate: 60 mm  opening in bed (diameter): 120 mmSLIDE  table surface (left-right): 350 mm  table surface (front-back): 250 mm  spigot hole diameter: 40 mm  stroke: 78 mm  stroke rate (max.): 145 /minSLIDE (MECHAN. PRESS)  slide adjustment: 60 mm  stroke min.: 8 mm  stroke max.: 78 mm  main drive power: 3 kWTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 297 mmELECTRICAL SPECIFICATIONS  total power consumption: 3.05 kW  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  ...

Mechanical stamping press manufactured in 2002. This PRESSIX 160 CNR 6 features a capacity of 160 tons and an adjustable stroke ranging from 20 to 200 mm. It operates at a speed of 20 to 70 strokes per minute and includes a motorized slide adjustment of 100 mm. The table dimensions are 1100 x 700 mm, providing ample workspace. If you are looking to get high-quality stamping capabilities, consider the PRESSIX 160 CNR 6 machine we have for sale. Contact us for further details.

- Brand:AMADEO FARELL - To make bullets - Loading mouth: 1200 x 500 - Tunnel size: 800 x 600 - Motor: 15hp (11kw) - With electrical panel

PRESS DESIGN  drive system: eccentric / crank   table cushion: yes PRESS FORCES  total force (nominal): 63 to  nominal work capacity: 630 kNmPRESS TABLE  table surface (left-right): 900 mm  table surface (front-back): 560 mm  opening in bed (diameter): 250 mmSLIDE  table surface (left-right): 450 mm  table surface (front-back): 310 mm  clamping surface diameter: 50 mm  stroke: 100 mm  stroke rate (max.): 100 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 17.5 mm  stroke max.: 100 mmDIE CUSHION (TABLE CUSHION)  number of cushions: 1 TOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 340 mm  distance table - slide max.: 440 mmELECTRICAL SPECIFICATIONS  total powe ...

SLIDE  total force (nominal): 250 to  stroke: 61 mm  stroke rate (max.): 60 /min  stroke rate (min.): 15 /minCOUNTER RAM  nominal force: 75 toV-RING  nominal force: 75 toTOOL DIMENSIONS  lower table (left-right): 540 mm  lower table (front-back): 540 mm  upper table (left-right): 540 mm  upper table (front-back): 540 mmSTRIP-FEEDER  sheet width max.: 250 mm  sheet thickness max.: 10 mm  sheet length min: 1500 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 3150 mm  space requirements -front/back-: 2120 mm  total height: 3000 mm  total weight approx.: 14000 kgLocated in Barcelona - SpainInstallation space of the toolsFront passage between the columns:Movable: 560 mmFixed: 560 mmSide passage between the columns:Mo ...

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 15 toPRESS TABLE  table surface (left-right): 360 mm  table surface (front-back): 260 mmSLIDE  stroke rate (max.): 165 /minSLIDE (MECHAN. PRESS)  slide adjustment: 40 mm  stroke min.: 7 mm  stroke max.: 60 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 226 mmELECTRICAL SPECIFICATIONS  total power consumption: 1.15 kW  mains voltage: 400 VDIMENSIONS / WEIGHTS  total weight approx.: 630 kgATTACHMENTS (PRESSES)  safety guard / safety door: yes   2-hand engagement: yes   foot engagement: yes   European CE standards: yes

PRESS DESIGN  drive system: eccentric / crank PRESS FORCES  total force (nominal): 80 toPRESS TABLE  table surface (left-right): 850 mm  table surface (front-back): 550 mmSLIDE  table surface (left-right): 560 mm  table surface (front-back): 376 mm  spigot hole diameter: 50 mm  stroke: 110 mm  stroke rate (max.): 60 /minSLIDE (MECHAN. PRESS)  slide adjustment: 80 mm  stroke min.: 0 mm  stroke max.: 110 mmTOOL ASSEMBLY DIMENSIONS  shut height (stroke down, adjustment up), BDC: 360 mmDIMENSIONS / WEIGHTS  space requirements -left/right-: 855 mm  space requirements -front/back-: 1635 mm  total height: 2640 mm  total weight approx.: 5400 kgATTACHMENTS (PRESSES)  2-hand engagement: yes   foot engagement: o ...

High: 2.050 mm, Long: 750 mm, Force: 10 tons, Width: 600 mm, Weight: 800 Kg., Neckline: 150 mm, Stem travel: 200 mm, Rate of climb: 10 cm / sec, Piston rod ø of: 65 mm, Surface of the table: 300 x 300 mm., Specification: Hydraulics

Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Key data: 50 t, 1600 mm, 200 mm

CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details.

This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), its CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information.