presses used for sale (1,650)

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm

Key data: 18 t

Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm

Key data: 30 t, 100 1/min

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

Key data: 1 t

Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

pressure: 40 tdistance between columns: 695 bzw. 215 mmstroke: 100 mmtable surface area: 650 x 440 mmram surface: 580 x 285 mmdayligth: 400 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m- with die cushion- with light bareer make SICKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4100 mm: 600 : 250 : 2900 mmStroke: 265 mmthroat: 400 mmdistance between columns: 3750 mmdayligth: 550 mmtable width: 60 mmoil volume: 600 lweight: 29.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tthroat: 345 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 85 mmtable surface area: 980x650 mmram surface: 600x440 mmhole in the table: Ø 200 mmtable height: 820 mmtool hole in ram: ¤7 65 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 2000x2000x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts hea ...

Key data: 75 t

Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm

pressure: 55 tthroat: 200 mmstroke: 10-80 mmram - range of adjustment: 60 mmno. of strokes: 120 Hub/mintable surface area: 600x450 mmram surface: 290x230 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 tthroat: 195 mmstroke: 8-78 mmno. of strokes: 76-190 Hub/minram - range of adjustment: 60 mmtable surface area: 650x380 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: BxTxH 1450x1220x2110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 730x600 mmram surface: 540x360 mmtable height: 850 mmtool hole in ram: Ø40 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 2000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3050 mmdistance between columns: 2550 mmControl: CYBELEC VisiTouch Pac stroke of ram: 524 mmweight of the machine ca.: 17.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

pressure: 2500 ttable length: 5200 mmtable width: 2300 mmPRESS FORCES: • CAPACITY : 2500ton• Point pressure capacity: • - Upper 1600t• - Down 900ton• Slide stroke: 650mm• Slide adjustment: 225mm• Slide stroke number: continue 9~25spm • Die-height: 1250mm• Slid size(LxR ,FxB): 5400x2400mm• Bolster size(LxR, FxB, T): 5200x2300x200mm• Balance capacity: 30ton• Main motor: DC 355kw• Feed back(bolster upper side): 700,780mm• Feed back stroke : 550,700,1000mm• Cramp stroke : 0-250mm• Lift stroke: 0~150mm• Transfer inner size(cramp): 650~2200mm • Die cushion capacity• No.1 station 120ton• No.2 station 80ton• No.3 station 60ton• No.5,6,7 station: 5ton• Stroke: 200mm• Bed size: 480x1780mm• Stop time: 430msThe data for this ad was created with ModulMWS - the software solut ...

pressure: 25 tthroat: 200 mmstroke: 4 - 80 mmtable surface area: 595 x 410 mmram adjustment: 70 mmno. of strokes: 150 Hub/mintable adjustable in height: 240 mmtotal power requirement: 1,1 kWweight of the machine ca.: 1,45 tdimensions of machine L x W x H: 1,30 x 0,80 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Key data: 750 kN, 150 mm

Control: STE 328-89-1 1/2" complete TOX Powerhouse: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

pressure: 180 tstroke: 400 mmcolumn daylight: 1500 mmFrame Width: 550 mmdistance spindle /table: max. 1000 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2100 kgdimensions of the machine ca.: 2300x1200x2850 mmDomestic equipments:- Stable welded construction- Pressure cylinder laterally adjustable- Electric control via lever / manual over hand lever- Pressure gauge via pressure gauge- Material supports per cylinder in the height adjustable- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 tstroke: 170 mmcolumn daylight: 600 mmFrame Width: 200 mmdistance spindle /table: max. 700 mmweight of the machine ca.: 200 kgDomestic equipments:- Stable welded construction- manually via hand lever- Pressure gauge via pressure gauge- CE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

pressure: 110 tthroat: 290 mmstroke: 20-124 mmno. of strokes: 60 / 90 Hub/minram adjustment: 85 mmtable surface area: ca. 920 x 590 mmram surface: ca. 530 x 280 mmdistance table to upper part of the press: ca. 450 mmhole in the table: ca. 180 x 300 mm mmtable height: ca. 750 mmtool hole in ram: Ø 50 mmNumber of working hours: 8214 hdistance table to upper part of the press: mmweight of the machine ca.: 5,5 tdimensions: ca. 2000 x 2000 x 2600 mmoverhauled by the manufacturer Helmerding in 2014 including conversion to new onespress safety control.Operating hours read since overhaul in 2014: 8214Documentation of press safety control availableelectrical grease central lubricationHydraulic clutch-brake combinationMechanical break plate in the ramtwo-hand operationfoot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Toggle press Manufacturer: unbek. Condition: used / good Offer will only be sent if a complete imprint is provided! Price 125 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-6 DESCRIPTION We offer you a used toggle press, see pictures. Another 60 presses on offer. Availability: immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!

pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.