presses used for sale (1,650)

pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 3550 mmdistance between columns: 3050 mmControl: Cybelec DNC 880S stroke: 700 mmthroat: 350 mmdimensions: 4400x2200x3940 mmweight of the machine ca.: 15.000 kgAccessories/equipment:- Bending aid in front of the machine- Parking space for bending aid- 3 stop fingers- Control conversion 2011The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tchamfer lenght: 2550 mmControl: Cybelec CybTouch 15 weight: 9000 kgdimensions: 3000 x 2100 x 3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single column - eccentric press WEINGARTEN type E 40 Masch. No. 643 / 62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and Ø 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Adjustable ram stroke 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100 / 130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination thanks to WEINGARTEN friction threaded clutch with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirements L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.

Eccentric press with black shield, Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Weight 800 kg,

Offer 24467 Specifications: - Max. pressing force 10 t - Max. ram stroke approx. 550 mm - Tool holder thread M 16 - Stand width approx. 1000 mm - Stand depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Height-adjustable table - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg

2 x Schmidt Eccentric Press ZHS-4/36 - 600 tons of pressing force Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...

pressure: 100 tthroat: 315 mmstroke: 8 - 112 mmtable surface area: 725 x 570 mmram surface: 410 x 315 mmram adjustment: 80 mmno. of strokes: 55 / 82 Hub/mintool shank hole (depth x diameter): 85 x 50 mmdayligth: 355 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6 tdimensions of machine L x W x H: 2,00 x 1,00 x 2,87 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm.

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen H ...

pressure: ca.10 tthroat: anpassbar mmstroke: 250 mmtable surface area: 220 x 220 mm mmmaterial diameter max.: ca. Ø 267 mmtotal power requirement: 1,5 kWweight of the machine ca.: 430 kgdimensions of the machine ca.: 899 x 772 x 1520 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 5 tdistance between columns: 300 mmdayligth: ? mmweight of the machine ca.: - tdimensions of the machine ca.: - mHandspindelpresse 5 toWorkspace: Tischfläche 280 x 260Control: ca. 180 mm HubThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2 tdistance between columns: - mmstroke: ? mmthroat: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic press 2tDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

pressure: 20 tstroke: 200 mmtable-size: 550 x 550 mmworking speed:: 10 mm/ sec.work height max.: 940 mmtoolpiece height max.: 200 mmtotal power requirement: 2,2 kW: 200 x 10 mmweight: 650 kgdimensions: 1,1 x 0,6 x 1,22 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram adjustment: 85 kWtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: Ø280 mmtable height: 830 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tthroat: 280 mmstroke: 10-90 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 750x540 mmram surface: 600x200 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø35 mmweight of the machine ca.: 3,7 tdimensions of the machine ca.: 1800x1800x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec

Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA