Bending Presses used for sale (132)

Metal Power Press Brake R 3050-100 BJ 2013

UKB 10.502 upper punch, UKB/Amada tool system. Precision-ground 88° upper punch, nose radius of R3.0 mm Auction-ID: A1-48414-17

Press brake Durmazlar ES 3006 BJ 2011

Rolleri T80.10.35 V die. Promecam System (R1). Made from high-quality C45 tool steel. For steel, stainless steel and aluminum. Auction-ID: A1-48414-16

Key data: 200 t

Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...

UKB 11.540 upper punch. UKB/Amada tool system. Precision-ground 26° upper punch. Maximum load of 1,000 kN/m. Rolleri T80.16.35 V die. Promecam System (R1). Made from high-quality C45 tool steel, suitable for steel, stainless steel and aluminum. Auction-ID: A1-48414-15

Press brake Amada Astro II BJ 2013

EURAM 2011 / 80 / 835 1-V lower die, Promecam system. Suitable for general bending and bending of thicker sheet materials, made of induction-hardened and ground tool steel Auction-ID: A1-48414-18

Press brake Hesse E 2040

UKB 20.305 press brake crushing die, UKB/Amada system. This die is used for sealing sheet metal after a pre-bending of 30°. Sheet thickness up to 3.0 mm (steel approx. 400 N/mm²). Auction-ID: A1-48414-19

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

3 axis NC controlled (Y1, Y2 and X) Including set of press brake knives, multi-V bottom dies l=3000mm, and edge rubber. In and with steel mobile racking. Auction-ID: A1-48414-5

Press brake Amada Astro HDS 1030 / NTR BJ 2010

CERVERA CHV 3006 - Hydraulic bending machine - 1997 CERVERA model CHV 3006 hydraulic folder. Manufactured in 1997. Useful folding length of 3,000 mm. Three-phase power supply 380 V. Equipped with adjustable electric backgauge and front control. Pedal operation. Suitable for boilermaking, metal fabrication and sheet metal transformation. Robust industrial construction for intensive use. Machine available for pre-inspection. Sold in the condition it is in. Auction-ID: A7-48385-74

Max. pressing force: 800 kN (80t) Max. bending length: 2500 mm At the moment there are 5 punching brackets that can be moved (built-in tool with 4 x 12 mm hole diameter and 1 x 10 mm) No other bending prisms available

Additional information:Delem DA 66W.8-axis Y1 Y2 X1 X2 Z1 Z2 R1 R2Tool line. Technical data:Power: 125 tFolding length: 3100 mmUpright passage: 2600 mmGooseneck: 210 mmEngine power: 9 kWApron stroke: 220 mmYear: 2004Dimensions: 4300 x 1670 x 2750 mmWeight: 10,000 kg Auction-ID: A1-48608-7

Press brake Beyeler RT 80x3100 BJ 1992

COLLY PS PRO 125/3 hydraulic press brake• Force: 125 T• Bending length: 3100 mm• Upright passage: 2600 mm• Gooseneck: 210 mm• Stroke: 310 mm• Motor: 9 kW – 380 V / 50 Hz / 3 Ph• Delem DA24E numerical control (3 axes Y1, Y2, X)• Complete tooling line (punches and dies)• Dimensions: 4300 × 1670 × 2750 mm• Weight: 9500 kg• Condition: used, good visual and functional condition• Year: 1995 Auction-ID: A1-48608-16

Key data: 50 t, 2550 mm

Hydraulic press brake Manufacturer Fasti Type UBGP 50/25 max pressing pressure 50t max working width 2550mm Lifting height 150mm with block matrix and div segments Press is in a used 100% functional condition. Can be loaded with overhead crane.

PROMECAM STPC 204 hydraulic press brake• Force: 200 T (2040 kN)• Bending length: 4100 mm• Passage between uprights: 3500 mm• Gooseneck: 400 mm• Stroke: 220 mm• Motor power: 17 kW• Delem DA-65W retrofit numerical control with 2D color graphics• 7 axes: Y1, Y2, X, R1, R2, Z1, Z2• 2 front consoles on linear guides• New tooling line (punches + dies)• Power supply: 380 V / 50 Hz• Dimensions (mm): 4495 × 1885 × 3250• Weight (kg): 14,200• Condition: used, excellent visual condition• Year: 1987 Auction-ID: A1-48608-11

Offer 25514 Specifications: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 535 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2700 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

Incl. stops and trolley, dimensions (LxWxH) approx: 1200x500x650 mm Pick-up date: 17.08 - 19.08 Auction-ID: A1-48584-10

Key data: 40 t, 1030 mm

For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...

Power: 150 tWorking parameters: folding length 3100 mm, upright passage 2600 mm, gooseneck 250 mm, apron stroke 120 mmEquipment included: 800 mm manually operated rear gauge, 2 front supports, 2 Y X axesConformity: approval granted to the PPH series by the I.N.R.S. under number 1332-PH-0904-V-0386Power supply: 220 V; Engine power 11 kWYear & Manufacturer: 1990, HACODimensions (mm): 3150 × 1650 × 2600Weight (kg): 11500Remarks: type PPH 30150; serial no. 51962. Auction-ID: A1-48608-4

Specifications: Pressure: 50 t Bending length: 2000 mm Equipment: - Backgauge - Emergency stop push button - Foot control

COLLY 1406S hydraulic press brake• Cybelec DNC 60 numerical control for precise axis adjustment• Leuze Electronic ML500 optical safety sensors• Prismatic ram guidance for high precision• Double foot pedal and hydraulic control side panel• Adjustable front stops, integrated sheet metal support• Complete tooling: mounted punches and dies• Robust mechanically welded structure, suitable for steel bending, stainless steel, aluminum• Dimensions (mm): approx. 3000 × 1800 × 2500• Weight (kg): approx. 8000• Condition: used, good visual working condition• Year: 1972 Auction-ID: A1-48608-14

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

incl. extensive accessories WITHOUT lattice box Pick-up date:10.08 - 12.08 Auction-ID: A1-48584-27

Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.

Bending lenght:3000mm Tools and prism included. Auction-ID: A7-48567-1

Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg

SILMAR hydraulic bending machine model PEL-103. Machine for sheet metal bending. Working length and tonnage to be verified. Status: Working. Equipped with safety light curtains. Approximate dimensions: 2,400 x 1,500 x 2,400 mm (L x W x H). Approximate weight: 3,500 kg. Auction-ID: A7-48385-9

Offer 25200 Specifications: - Pressure capacity 200 t - Working width 3100 mm - Passage between the uprights 2600 mm - Table width 180 mm - Projection 300 mm - Installation height 450 mm - Feed speed 80 mm/sec. - Working speed 9 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Drive 400 V / 18.7 kW - Space requirement approx. W 3300 x H 2950 x D 1900 mm - Weight approx. 10500 kg - with: - Adjustment of the crimping depth + baling pressure -Mot. Backgauge with handwheel fine adjustment - 4-fold universal die - sharpening tool - Two-hand control panel, foot switch,

Bending lenght: 2500mm Tools, prisma included. Auction-ID: A7-48567-2

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

Manual press brake Bending length 300mm Material thickness max. 2mm Knife widths 25, 50, 75 and 150mm Bending angle max. 90 degrees Condition: never used / new (5) Auction-ID: A7-48486-110

Offer 25100 Specifications: - Pressure capacity 200 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table width 180 mm - Projection 250 mm - Installation height 400 mm - Feed speed 80 mm/sec. - Working speed 6.7 mm/sec. - Retraction speed 67 mm/sec. - Plunger stroke 150 mm - Adjustment range fixed stops 120 mm - Drive 400 V 14.5 kW - Space requirement approx. W 3800 x H 2980 x D 1700 mm - Weight approx. 11500 kg - with: - Back gauge with 2 stop fingers - Deer's foot tool - 4-fold universal die - Two-hand control panel, foot switch,

1 x MAAD Bending Bench Sheet Metal Bending Machine Bending Machine Auction-ID: A1-48053-145

Specifications: - Max. working length 4060 mm - Column passage 3680 mm - Max. pressing force 1700 kN - Max. distance table / plunger 385 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - hydr. Upper + Lower Tool Clamping - Die table displacement pneumatically supported

: neu : ca. 12 Wochen ab Auftrags : Türkei : 41200 €: 786.92 €: 40 to: 1550 mm: X und Y Achse : 160 mm: 1260 mm: 320 mm: 380 mm: hydraulisch : 90 mm/s: 10 mm/s: 600 mm: 845 mm: 100 mm: 120 l: 5.5 kW: 2000 mm: 1600 mm: 2235 mm: 3450 kgNC control for immersion depth (Y) and back gauge (X)synchronization control by means of a torsion shaftsheet support armslight barriersintermediate pieces for the upper tool clampingdie seat and diedie seat with 4 V openingssplit upper tool, slightly cranked, dividedpedaluser manual in GERMAN or ENGLISHOPTIONAL EQUIPMENT (PRICES ON REQUEST):laser safety device FiesslerNC controlled R axismanual crowning tablemotorized crowning tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.

: gebraucht : 2023 : 7280 : prompt, Zwischenverkauf v : Türkei : 15700 €: 1 : 100 to: 1000 mm: 300 mm: 7.5 kW: 2110 mm: 1000 mm: 2275 mm: 1900 kg: 1 : 680 mm: 1020 mm: 5 mm/s: 10 mm/s: 6 mm: 100 mm: 190 mmdemo machine / mint conditionnet price (price for new machine € 19.550,00)2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand panel and foot pedalheight adjustable tableuser manual in Germanand Englishaccording to CE rulesBUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISEWe offer you maximum security and complete transparency.• HONEST INSIGHTS: Detailed photos and functional videos of the current condition• LIVE ON-SITE CHECK: Live testing is possible at our facility• DIGITAL DEMONSTRATION: Individual live demonstration via video ...

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

: neu : ca. 12 - 14 Wochen ab Auf : Slowakei : 28300 €: 540.53 €: 40 to: 2000 mm: X und Y Achse : 100 mm: 310 mm: hydraulisch : 38 l: 6 kW: 2500 mm: 1200 mm: 1900 mm: 2100 kg: 420 mm: 1 : 10 mm/s: 12 mm/s: 40 mm/s: 0.02 +/- mm: 0.05 +/- mm2 axes(Y andX)motorized backgauge with push button and manual fine adjustment with counterpreselection of press depth Y and upper dead pointintermediate piece with quick-release lever for upper tool clampingupper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divideddie type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided2 support armsaccording to CE rulesoilfillinguser manual in GermanThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 3600 mmControl: Cybelec CybTouch 15 stroke: 250 mmdayligth: 470 mm: 180 mm/sbending speed: 0-10 mm/s: 165 mm/stotal power requirement: 15 kWweight of the machine ca.: 12.500 kgdimensions: 4000 x 2000 x 3030 mmStandard equipment:- Cybelec CybTouch 15 Windows CNC control- 4 + 1 axes: Y1, Y2, X, R, C- Mechanical crowning system: B-CM- Backgauge system, model GHP-2- Servo-driven main motor- Safety system: DSP AP+MCSOptional equipment:- 2 x front support tables- 2 x stop fingers- Wila Style hydraulic upper die clamping- Wila Style hydraulic die clamping- CE Standard complianceYouTube video links:https://www.youtube.com/watch?v=u3sBJxJ3M8ghttps://www.youtube.c om/watch?v=MmZtAJArHA0https://www.youtube.com/watch?v=mybVan1S2pkThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: 1500 mm: 300 mm: 7.5 kW: 2630 mm: 1000 mm: 2275 mm: 2500 kg: 1 : 680 mm: 1520 mm: 5 mm/s: 10 mm/s: 6 mm: 100 mm: 190 mm2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand operating panelheight adjustable tableuser manual in Germanand Englishaccording to CE rulesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training

pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: 500 mmcontrol: DA 66T oil volume: 150 ltr.voltage: 380 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request- in checked condition - machine video -https://www.youtube.com/watch?v=KRifrqTgkVU-------------------------- ----------------------SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds------------------------------------------------Equipment:- CNC electro-hydraulic press brake- DELEM CNC control model DA-66T graphics/touchscreen 2D graphic touchscreen progr ...