other metal working machines used for sale (10,971)

Spectral range: 250 to 1,000 nm Power range: 1 mW to 12 W Irradiance range: 5 mW/cm² to 60 W/cm² Accuracy: ±5% typical, ±10% maximum Power and irradiance measurement Automatic selection of the measuring range Absolute and relative measurement mode Automatic light guide detection Memory of measuring points Connection for external sensors Communication with PC Powered by 3.6 V lithium battery Supplied in a case with adapters Alluris FMI-S20 Maximum capacity: 500 N Resolution: 0.1 N Tolerance: 0.2% of rated capacity Measurement of tensile and compressive forces LCD Digital Display Display of the instantaneous value and the peak value Units of Measurement: N, kgf and lb Automatic calibration Bidirectional strain gauge load cell Overload protection M6 threaded measurement fitting Integrated photovoltaic power supply Cast aluminum housing Ingress protection: IP40 Auction-ID: A1-51172- ...

Non-contact 2D and 3D measurement Connection of up to 2 measuring heads Maximum frequency in 2D mode: 1 kHz Maximum frequency in 3D mode: 16 kHz depending on configuration Up to 1,000 recordable control parameters Up to 100 measurement tools per configuration Minimum display resolution: 0.1 μm 1000BASE-T / 100BASE-TX / 10BASE-T Ethernet Interface RS-232C Interface USB Ports RS-422 encoder input / open collector Analog monitor output RGB XGA 1024 x 768 2 SD card slots USB hard drive connection up to 2 TB Power supply: 24 V DC ±10% Maximum power consumption: 3.3 A Operating temperature: 0 to +45 °C depending on installation Permissible relative humidity: ≤ 85%, non-condensing Auction-ID: A1-51172-135

RAYTEK Raynger MX4 Infrared Thermometer Type: Non-Contact Portable Infrared Pyrometer/Thermometer IR measurement range: -30 to +900 °C Display resolution: 0.1 °C IR accuracy: ±1% of measurement or ±1 °C Repeatability: ±0.5% or ±1°C Response time: 250 ms Spectral range: 8 to 14 μm Optical resolution: 60:1 Circular laser sight Adjustable Emissivity: 0.10 to 1.50 Memory: up to 100 bars Functions: Min / Max / Average / Difference High and low temperature alarms RS232 / analog data output Compatible with K/J thermocouple probes Power supply: 2 AA batteries or external power supply Dimensions: approx. 200 x 170 x 50 mm Weight: approx. 480 g With box, power supply and accessories Auction-ID: A1-51172-99

Various Hydraulic Cylinders Type: Various hydraulic cylinders and hydraulic components Contents: Assorted hydraulic cylinders of various sizes and types, including compact hydraulic motors and valve blocks, stored on a 5-shelf wooden rack Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-38

Charmilles Robofil 510 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Charmilles Model: Robofil 510 Year of manufacture: 1995 Workpiece weight max.: 300 kg Electric connection: 380 V Approx. machine weight: 3350 kg Table dimensions: approx. 700 x 500 mm Maximum workpiece height: approx. 310 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-68

Marble size: 1,250 × 2,650 mm Granite measuring table Pneumatic guides on the axes Motorized movement of the X, Y and Z axes RENISHAW PH10M PLUS Swivel Motorized Probe Head RENISHAW PI 200 probing interface Motorized indexing probe Metrologic Group ME 670 manual control Control console with multi-directional joysticks Integrated emergency stop Power supply and control box included Auction-ID: A1-51172-100

Made of stainless steel. Equipped with large display. Designation in MM and Inches Includes: 2x 1.5V battery (LR44) Packed in storage case Weight incl. case: 310gr. Auction-ID: A1-40900-92

Marble dimension, 1270 × 1200 mm Auction-ID: A1-51172-102

KEYENCE VL-500 Series 3D Optical Measuring, Scanning, and Digitizing System General data - Manufacturer: KEYENCE - Model Series: VL-500 Series - Year of construction: 2021 - Made in Japan - Optical 3D measuring, scanning and digitizing system - Non-contact measurement and digitization of components Scope - KEYENCE VL-570 measuring system - KEYENCE VL-550 Evaluation Unit - KEYENCE VL-500 Controller - KEYENCE VL-A2D Accessories - KEYENCE VL-C2 Cover - Connection and connection cables included Areas of application - 3D coordinate measurement - Optical component measurement - Reverse engineering - Target/actual comparison - Geometry and shape testing - Quality control and incoming goods inspection - Digitization of tools, molded parts and technical components - Creation of 3D data sets and CAD comparisons Measurement technology - Non-contact 3D capture of complex geometries - Automatic a ...

ZEISS Axio Imager.M2m Motorized Metallographic Microscope Manufacturer: ZEISS Model: Axio Imager.M2m Type: Metallographic Upright Light Microscope / Materials Analysis Motorized system for control and analysis applications Motorized Z Focus Z Focus Motor Pitch: 25 nm Multi-Objective Turret Binocular/trinocular observation head Camera output for digital image acquisition Observation possible in reflected light and, depending on configuration, in transmitted light Contrast modes depending on equipment: brightfield, darkfield, polarization, DIC and C-DIC Applications: metallography, microstructure analysis, surface testing, inclusions, grains, cracks, coatings and material defects Use: quality control, laboratory, research and industrial analysis Auction-ID: A1-51172-97

Cleancut EDM650 CNC Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Cleancut Model: EDM650 CNC Year of manufacture: 1999 Serial number: 904669 Electric connection: 380 V / 50-60 Hz Amps: 150 A Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-17

Small conventional shaping/slotting machine with T-slotted table and manual controls. Compact workshop machine for light shaping and slotting work. Auction-ID: A1-51153-76

Hydraulic Material - 5 Carts with Fittings and Components Type: Hydraulic material Contents: 5 carts loaded with new hydraulic components stored in assorted bins Load capacity: 200 kg - 500 kg Approx. total weight: 4000 kg Approx. dimensions per cart (L x W x H): 1300 x 1300 x 2000 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-75

Number of Input Channels: 3 Inputs compatible with Digimatic measuring instruments Output Interface: RS-232C Transmission speeds: 300 / 600 / 1,200 baud Individual selection of the 3 channels Data Load Command Reset function Transmission of measurement data to computer system Main On/Off Switch AC power Auction-ID: A1-51172-120

Auction-ID: A1-51172-94

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated input current: 25A Rated input power: 5.5 KVA Open circuit voltage: 243V Output Current Setting: 20-40A Rated output voltage: 96V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact Weight: 6.9 kg Dimensions: 375X155X300 Auction-ID: A1-40900-449

ZEISS SteREO Discovery.V8 Stereo Microscope Manufacturer: ZEISS Model: SteREO Discovery.V8 Type: Professional Optical Stereo Microscope for Inspection and Control Magnification / zoom: 8:1 optical zoom Observation: binocular, three-dimensional image Applications: Quality control, part inspection, surface analysis, sample observation and documentation Camera: ZEISS AxioCam MRc Lighting: ZEISS lighting system / KL 1500 LCD Visible additional equipment: camera output, computer station and observation accessories Configuration: Base-mounted assembly with microscopy accessories Pictured setup: ZEISS SteREO Discovery.V8 stereo microscope equipped with a ZEISS AxioCam MRc digital camera and KL 1500 LCD illumination system. Auction-ID: A1-51172-96

Used unchecked Auction-ID: A7-51143-39

- Cutting length 2500 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-608

Auction-ID: A1-50244-44

Lybover extraction system with piping, filter/unit housing on steel construction and vertical chimney with filter/unit housing, steel ductwork with bends and flange connections, steel support frames/uprights, vertical chimney. Chimney height 21.5 meters, floor area of fiter/extraction approx. 10x10 meters, with 4 slope parts to which 'big bags' can be connected. Including Keller silo, of approx. 4.7x2.8 meters. Auction-ID: A1-50656-1

on and including pallet Auction-ID: A1-50656-162

And 1x \"Siglent\" function generator type SDG 1032X Auction-ID: A1-50244-43

Anvil on wooden base Auction-ID: A1-50656-155

Machine type: TUF 1400/1651 - 400 x 3200 Machine number: 2370002 Year of construction: 2023 Application: Separation of casting and sand Lining: Cuff wall 8 mm - HB 400 Trough Material: Normal Steel Displacement: Compression spring Vibration weight: 4600 kg Vibration distance: 8.5 mm Vibration frequency approx.: 16.6 Hz Material: Casting and sand Transport quantity: 120 moulds/h Mass flow sand: 95.04 t/h Diagonal size packed quantity: 1279 mm Temperature: 450 °C Auction-ID: A1-50656-44

Technical data sheet available Auction-ID: A1-49565-4

With printer head and bag Auction-ID: A1-50244-38

Adapt Cleanlaser CL50 advanced and compact pulsed fiber laser cleaning system for the environmentally friendly and extremely accurate removal of rust, paint, coatings, oil and pollution. Ideal for the pre-treatment of welded edges, die and tool cleaning, and historical restorations without deterioration of the parent material. - Gaussian beam shape ideal for bonding/pre-weld - Pulse power of up to 50kW - Diode-pumped solid-state laser - Low noise air cooling - Large working distance (up to 500 mm) - Modular design in 19\" industrial housing - Easy integration into the production line Auction-ID: A1-50846-15

Cast iron smelting plant consisting of: A: 2 cold air ovens, capacity: 2-6 t/h and 5/12 t/h with double jacket, water-cooled, extraction rings, sotope filling level indicator, nozzle, smoke hood, drain point for cast iron and slag, B: Spellna fan, type: VRU 28-250-30H3, capacity: 9,000m3/h, C: Wind control with fan and motor 90kW, D: Dust injection with control E: 2 front fireplaces, gas-fired and mobile with weighing device, burner set, day tank, etc. F: Beckmann measures, switches and control panels with recorders and detection lamps G: Concrete spraying compound, mobile, for spraying sand mass including accessories H: Installation for quarrying and furnace repair I: Elevator shafts made of steel with mesh with accessories J: mixer with motor and accessories. Auction-ID: A1-50656-11

Sheet metal shear on semi-mobile base Auction-ID: A1-50656-173