other metal working machines used for sale (11,376)

Auction-ID: A3-43515-11359

v.v. euroklemming Auction-ID: A1-45793-116

Unaudited from company closure Auction-ID: A7-45427-42

sheet width:3050 mmplate thickness:4 mmtotal power requirement:9 kWweight of the machine ca.:6 tdimensions of the machine ca.:3900 x H 1850 x T 2100 mm

Nieaf-Smitt PAT 3140S, a portable appliance tester specially designed for the inspection of electrical work equipment according to the NEN 3140 standard. Key features and functions: The PAT 3140S is used by professionals to monitor and document the electrical safety of tools and devices. The main test features are: Ground Conductor Test: Checks the continuity of the grounding with a test current of 200 mA DC. Insulation resistance: Measure the insulation with a test voltage of 250V or 500V DC. Leakage current measurement: Measures the actual leakage current up to 19.99 mA. IEC Cable Test: Specific check for testing extension cords and device cords for continuity and short circuit. Auction-ID: A1-41993-111

Length 3615 mm; V45 die Auction-ID: A1-45793-113

Auction-ID: A3-43515-6034

Precision Wheatstone Bridge Resistance Meter with Galvanometer Gauge Auction-ID: A7-45427-114

grinding diameter:3 - 150 mmgrinding length:200 mmtotal power requirement:380V, 50Hz, 30 kWdimensions of the machine ca.:5 x 3 x 2,5 m

grinding diameter: 0,2 - 190 mmgrinding length:400 mmcentre height:100 mmweight of the machine ca.:1,6 tdimensions of the machine ca.:2 x 1,5 x 1,8 m

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

Total force (nominal):800 toClamping surface (left-right):x mmClamping surface (front-back):x mmtable surface area:3200 X 2200 mmTotal force (nominal):2-3-4-5- Presse - 600 to. totable surface area:2-3-4-5- Presse 3100 X1900 mmLast overhaul 2010/2020, consisting of:Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by SiemensBlank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet dischargeGripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300Double-column press, manufacturer Weingarten, type ZS 1200.34Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing  ...

indexing:Länge =< 1050 mmtable::Teilungslänge =

valve dimensional inspection

The analyzer measures the deviations and displays them via a recorder. The EVTM device is used to measure gear parameters such as profile, flank line or pitch deviation. • It is mechanically applied to the gear wheel, and deviations are registered via electric displacement transducers (buttons). • The measurement results can then be evaluated or recorded via the first device (the recorder/analyzer). The EVRM is used in conjunction with the other two devices to process vibrations (acceleration/speed/displacement) and output them as an analog signal. It is used for: • Vibration diagnosis on machines (bearings, imbalance, alignment) • Resonance measurements for workpieces / test benches • As an interface between sensor (accelerometer) and meter/recorder/oscilloscope It is sold unchecked from a company closure Auction-ID: A7-45427-1

Unaudited Auction-ID: A7-45427-256

Auction-ID: A3-43515-11361

V6 30 degree T mold set; length approx. 3.1 meters Auction-ID: A1-45793-118

diameter:500 mmworkpiece weight:30 kgtest dia. min.:200 mmtotal power requirement:0,03 kWweight of the machine ca.:1000 kgdimensions of the machine ca.:1x0,5x1,06 m

Fluke Grounding Meter Good condition and new probes! Auction-ID: A7-45427-26

measuring range X-axis:-50 . 530/830/1030 mmmeasurement range Z =:605/805/1005 mmtool taper:30 & 40 VDIcompressed air:6 bardimensions:2200 x 1200 x 2100 mmachine weight ab.:900 kgVertical Toolsetter with Cutting Edge detection via Camera System.Operating over CNC Control yb PC System or Manually, 3 axes, CNCEquipped with Modular Prescision Spindle with CNC Rotary Axis. Digital Glas Scale in all Axisand Linear Roller bearing in all Axis of the Slide Carriage.Electronic measuring equipment:PC electronics with intelligent KELCH EasyVision image processing17" TFT colour monitorOptional: second 17" TFT monitor for full screen measuring windowThe CNC Toolsetter is in good condition and ready for immediate use.

equipped with Torit extraction Auction-ID: A1-45793-11

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EUROPower & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones.2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device.Powder Curing Oven, direct gas heated three-zoneSpray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device.Opening Cross Section Areal: Width 750 mm, Height 1000 mmTechnical Details: Pretreatment conveying speed 2.3 m / min.Pretreatment surface area approx. 200 m2 / h.Painting Surface approx. 120 m2 / h.Throughput of workpieces approx. 4,000 kThis Poweder Coatin ...

x-travel:400 mmy-travel:300 mmz-travel:500 mmtable clamping surface::400 x 300 mmtable load:50 kgsemi-automatic operated:LASERSOFT 3D laser capacity:100 Wtotal power requirement:27 kVAweight of the machine ca.:2,5 tdimensions of the machine ca.:3 x 3,5 x 2,8 mCNC engraving/texturing/labeling/contouring-laser maschine,approx. 9.000h "machine on", approx. 5.500h "laser on"

Auction-ID: A1-43332-109

Auction-ID: A1-43332-113

measuring range X-axis:150- 300 mmmeasuring range Y-axis: mmTable dimensions: mmmeasurement range Z =:450 mmenlargement:20 X fine adjustment:+/- 5 mmcompressed air:6 bardimensions:2 x 1,5 x2 mmachine weight ab.:150 kg

max. wheel diameter:275 mmgear width:58 mmmax. module:8 min. module:0,5 weight of the machine ca.:10 tmax. number of teeth:200 min. number of teeth:5

length:12192 mmwidth:2438 mmheight:2896 mmweight:4580 kgTotal weight:34000 kgcharge:29420 kgCooling ContainerInternal dimensions:Length 11585mmWidth 2290mmHeight 2545mmPallet spaces 23