other metal working machines used for sale (10,792)

Manufacturer: Frech Model: DAK 315S Year of Manufacture: 1996 Type of Machine : Cold Chamber Die Casting Machine Control System: Frech DataControl Shot Count: At least 1,147,108 (indicative, hardware change recorded) Condition: Fully production-ready, currently still connected and operational Included: Striko Westofen W455 holding furnace Technical Specifications - Clamping Force: 3,150 kN - Opening Force: 10,000 daN - Closing Stroke: 500 mm - Adjustable Opening Stroke: Yes - Ejector Force / Retraction Force: 159 / 82 kN - Ejector Stroke: 120 mm - Die Height Min-Max: 300 - 700 mm - Platen Size: 900 x 900 mm - Tie Bar Spacing: 550 x 550 mm - Tie Bar Diameter: 110 mm - Injection Position: 0 / -80 / -160 mm - Maximum Injection Force: 350 kN - Injection Stroke: 430 mm - Shot Sleeve Diameter: 50 / 60 / 70 / 80 mm - Shot Volume: 563 / 811 / 1103 / 1441 cm3 - Specific Injection Pressu ...

Manufacturer: Hurco Model: VMX1 Year of manufacture: 2004 Type of Machine: CNC milling machine Control unit: Hurco Ultimax Spindle taper: SK 40 Spindle speed: max. 10,000 rpm Milling feed: max. 11,400 mm/min Table size: approx. 760 × 355 mm Travel distances: X 660 mm / Y 355 mm / Z 455 mm Tool changer: 16 positions Motor power: max. 13 kW Weight: approx. 3,400 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - chip conveyor - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Hurco Model: VMX24i Year of construction: 2021 Type of Machine: CNC milling machine Controller: Hurco Max 5 Spindle taper: SK 40 Spindle speed: max. 12,000 rpm Working feed rate: max. 38,000 mm/min Table size: approx. 760 × 510 mm Travel distances: X 610 mm / Y 508 mm / Z 610 mm Tool changer: 30 positions Machine power: max. 19 kW Weight: approx. 4,750 kg Condition: - Used (like new), very good overall condition - Fully functional and ready for use Equipment / Accessories: - High-pressure cooling system for coolant supply through the spindle (20 bar) - Cooling air via coolant nozzles or through spindle - Workpiece position detection with 3D probe - Tool measurement using touch probes - Chip conveyor (scraper belt conveyor) - Machine vises - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon req ...

Manufacturer: Weeke Model: Profiline ABL 220 Year of Manufacture: 2008 Type of Machine : CNC drilling machine with fitting units CE Certified: Yes Electrical Specifications - Operating Voltage: 400 V / 50 Hz - Power: 24 kW - Current: 50 A - Control Voltage: 24 V DC - Workpiece Dimensions - Length: min. 250 mm / max. 2400 mm - Width: min. 240 mm / max. 850 mm - Thickness: min. 12 mm / max. 60 mm The machine processes rectangular workpieces made of melamine-coated chipboard and similar panel materials. Machine Performance - Machining capacity: approximately 300 to 350 furniture frames per 7.5-hour working shift. - Axis Speeds: - X-axis: 80 m/min - Y-axis: 80 m/min - Z-axis: 20 m/min - Drilling Unit - V18 High Speed 7500 - Configuration: 18-spindle vertical drill unit (CONFIG-V18) - Spindle Speed: 1500 to 7500 rpm (variable speed controlled) - Direction of Rotation: Right / Left - ...

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Biglia Model: B501 M Year of Manufacture: 1996 Type of Machine : Lathe CNC Control: GE Fanuc 0-T Turning Capacity - Maximum turning length: 500 mm - Maximum diameter over the bed: 520 mm - Maximum workpiece diameter: 68 mm - Maximum diameter per pass: 250 mm Spindle Specifications - Spindle bore: 80 mm - Spindle motor: 22 kW - Maximum spindle speed: 4000 rpm Axis Travel X-axis travel: 2105 mm Z-axis travel: 500 mm C-axis minimum programmable step: 0.001 degrees High-speed traverse: up to 80 rpm Turret and Tooling - Turret positions: 12 - Motorized tool positions: 6 - Motorized tool speed range: 50 to 3000 rpm - Motorized tool motor: 3.7 kW - Tailstock - Tailstock travel: 100 mm (automatic) - Tailstock taper: CM4 - Additional Equipment Included - Autoblok 210 BB chuck with hardened jaws - Filtermist FI4/8 fume extractor - Chip conveyor Machine Dimensions and ...

Manufacturer: Trumpf Type: Tru Laser 3040 5000 (5kW laser power) CO2 Working area: 4,000mm x 2,000mm Year of manufacture: 2009 Laser on: 24,146 hours Beam in: 10,319 Bh - Cool Line - High-speed cutting head - The machine has always been meticulously maintained by Trumpf under a maintenance contract and is in very good condition Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: RUD Model: 16t Type of Machine : Turning Device Load Capacity: 16,000 kg Dead Weight: 4,400 kg Tilting Angle: 90 degrees Tilting Time: approx. 50 seconds Table Surface (Length x Width): 1,600 x 1,600 mm Table Height from Floor: approx. 1,100 mm Electric Power: 3.0 kW Overall Dimensions (L x W x H): approx. 2,600 x 1,800 x 2,800 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - .ucymachines/ Contact us at - sales@ucymachines

INCLUDED ELEMENTS - High pressure pipes - TCI Cut Control 3.0 - Software communication TCI Online 1.0 - Height control system TCI SRA 4.0 - Abrasive transfer system TCI Abraline 1.0 - Class IV safety system and CE marking - Abrasive metering system TCI Abrasive 3.0 - Anticollision system TCI Collision Protection 2.0 - Cutting table with 1 cutting head KMT Active IDE - Numeric control TCI CNC 4.0 - TCI Smart Touch 6.0 - KMT OEM SL-VI 50 HP 4,000 bar, 1L high pressure pump - CAD/CAM Lantek Expert 2D with automatic nesting - International support Lantek - Proportional control valve KMT 50HP OEM - Water treatment equipment TCI Hidrosystem 2.0 - Water/oil closed loop chiller - Sludge removal system TCI Extraction System 2.0 4020 - Submerged cutting system TCI Subwater 1.2 C - Installation and set-up - Training software CAD/CAM in cutting facilities - Training cutting and maintenance - Plasma ...

max. wheel diameter: 762 mmgear width: 116,84 mmmax. module: min. module: total power requirement: 145 kWweight of the machine ca.: 27 tdimensions of the machine ca.: 5,5 x 5,3 x 3,4 mWith the GLEASON Phoenix® 800HG bevel gear grinding machine, manufacturers of spiral,hypoid, and other bevel gears for large components can significantly increase their productivity.The machine enables faster grinding processes while maintaining the highest accuracy andexcellent repeatability.Its extremely robust machine design forms the basis for stable machining processes, even for largeworkpiece diameters of up to 762 mm. Combined with a powerful FANUC CNC control system, the800HG offers maximum flexibility for a wide range of gear geometries—from spiral and hypoidbevel gears to special forms.Thanks to its well-thought-out machine concept, the Phoenix® 800HG allows for reduced setuptimes, supportin ...

Machine Details - Manufacturer: Mitutoyo - Model: Euro C-Apex 122010 - Year of manufacture: 2001 - Type of Machine : Coordinate Measuring Machine - The regular factory calibration was last performed in March 2012 - In operation until 2013. In 2013, it was professionally dismantled by Mitutoyo. It was then stored in an industrial building. Measuring Range - X-axis: 2000 mm - Y-axis: 1200 mm - Z-axis: 1000 mm Technical Specifications - Accuracy (ISO 10360-2): E = 4.9 + 5L/1000 um - Probing error (ISO 10360-2): R = 5.0 um (TP200) - Resolution: 0.0001 mm - Guide system: Air bearing on all axes - Length standard: Linear encoder - Measuring table material: Granite - Maximum workpiece height: 1115 mm - Maximum workpiece weight: 2000 kg - CNC measuring speed: 1 to 3 mm/s - Maximum drive speed: 430 mm/s Included Equipment - Probe head: Renishaw PH 10 - Probe system: TP 200 - Stylus rack: 6 ...

Dimensions (L/W/H): 1950x690x1700 mmWeight: 451 kgTotal power requirement: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.