other metal working machines used for sale (11,389)

diameter: 20 - 100 mmworkpiece length: 3000 - 12000 mmnumber of rolls: 2 Control: Siemens SPS/PLC Tensile Strength: 70 kg/mm²feed speeds: 60 m/minAngle: 10 - 22 °main drive motor: 132 kWroll speed: 180 U/mintotal power requirement: - kWweight of the machine ca.: 24,5 tdimensions of the machine ca.: 7500 x 3000 x 2850 mMachine was retrofitted (Eletric) and not much used2 roller straightening machine, fully hydraulic and equipped with:- Siemens PLC/SPS control system- Hydraulic roller- Loading table with chain transport- Infeed channel with pressure roller- Pressure rollers- Gearboxes and motors- Siemens Sinamics drives- New electrical system- Hydraulic units- Spare set of rollers- Machine with complete hydraulic adjustment-- Upstroke of upper Roll: 210mm-- Hydraulic cap Stroke: 13mm-- Side Guides and Scrapers set at Exit: 20+35mm 35+65mm  ...

CNC lathe Type: ST-20 Y Manufacturer: Haas Year: 2023 Control: Haas Max.turning diameter: 298 mm Max.turning length: 572 mm Swing over support: 533 mm X: 213 mm Z: 572 mm C-axis Y-axis: +/- 50.8 mm Driven tools Tailstock Tool probe X/Y/Z axis rapid traverse - 24.0/12.7/24.0 m/min Spindle cone: A2-6 Max. power: 14.9 kW, spindle drive Vector Drive Max. torque: 203 Nm Max. spindle speed: 4000 rpm Spindle bore: 63.5 mm Automatic hydraulic chuck: 210 mm Turret MBT65 : 12 position Max. speed of driven tools: 4000 rpm Drive of all positions of the BMT65 turret Coolant tank: 208 l with pump El. connection 3x400V/50HZ, 14kVA Machine weight: 5300 kg Linear rollers pre-tensioned axis guide Central automatic lubrication - axes with grease / spindle with oil Lighting of the working space Automatic hydraulic 3-jaw chuck A set of tool holders (only for BOT or HYBRID revo ...

Manufacturer: Haas Model: ST-20Y Year of Manufacture: 2016 Voltage: 400V Phase: 3 Frequency (Hertz): 50/60 Hz Full Load Current: 27 Amps Largest Load Current: 18 Amps Short Circuit Interrupting Capacity: 10,000 Amps Wiring Diagram Reference: 96-0284 Short Circuit Current Rating: 5,000 Amps RMS symmetrical Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/725 Year of Manufacture: 2005 Power Requirement : 17 kW Voltage (VOLTS): 400 V Current (AMPS): 24 A Frequency (FREQ): 50 Hz Phase (PHASE): 3P + N + PE (Three-phase with Neutral and Protective Earth) CE marked Find more here - / Contact us at -

Manufacture: Linematic Model: LM34/949 Year of Manufacture: 2015 Power Requirement: 12 kW Voltage: 400 V Current: 16 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

Manufacturer: LINEMATIC Model: LM34/882 Year of Manufacture: 2012 Power Requirement: 28 kW Voltage: 400 V Current: 40 A Frequency: 50 Hz Phase: 3P + N + PE Certification: CE Find more here - / Contact us at -

Manufacturer: Index Model:MS 25 M Year of Manufacture: 1990 Type of Machine : Lathe, 6 Spindles - Main spindle: 25 mm - Drive: Mechanical - Features & Equipment: - Bar loader (IEMCA) - Pallet changer - Chip conveyor - Driven tools - Additional accessories included Condition: Used, in good working order. Find more here - / Contact us at -

Type of Machine : Coolant System Model: HA 500 / 100 – AF Year of Manufacture: 2015 Flow rate: 500 l/min Medium: Cutting oil Work material: Aluminum Main voltage: 400 V / 50 Hz Control voltage: 24 V DC Total power: 44.1 kW Current consumption: 81.4 A Empty weight: 1,350 kg Find more here - / Contact us at -

Manufacturer: Bär Type of Machine : Coolant Cleaning System Year of Manufacture: 2015 Voltage Supply: 3L/ N/ PE 400 VAC / 50 Hz Control Voltage: 24 V DC Connection Rating: 185 kW / 350 A Max. Fuse Protection: 400 A Minimum Cable Cross-Section: 240 mm² Find more here - / Contact us at -

x-travel: 200 mmy-travel: 60 mmz-travel: 500 mmspeed of measurment: 0,02 - 20 mm/s0: X = 0,05 µm 0: Z = 1 µm mgtraversing speed: X = 0 - 80 mm/sbase plate: 600 x 450 mmweight of the machine ca.: 164 kgdimensions of the machine ca.: 766 x 482 x 1166 mmCE signed: Contracer contour measuring device, high-performance measuring system for automatic series measurement with motorized Z-column on granite plate. Straightness guidance of the X-axis via ceramic and automatic raising and lowering of the probe tip. Measuring range Z1 - axis = 60 mm. Table, screen and PC. The software can measure, evaluate and document.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5500 mmy-travel: 3000 mmz-travel: 1500 mmtable-size: 3000x5000 mmtable load: 15 t/m2taper ISO: ISO50 spindle turning speed range: 10-3000 U/minengine output: 17,5 kWControl: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Measuring range: 1.000 mmerror limit 20°C +/- 1°C: 3 + L(mm) / 300 µmrepeatability: 2sec: 2 µmResolution: 0,01 / 0,001 mmadjustment speed: max. man. 1 m/sPower: 0,7 - 1,6 Ntemperature: +10 .. +40 °Ctotal power requirement: 15 Wweight of the machine ca.: 15,0 kgdimensions of the machine ca.: 0,4 x 0,4 x 1,30 mDocuments: Transmission: RS 232 Height Measuring DeviceTRIMOS - V 1002+- Application area: 1.235mm- Max. angularity deviation: 12µm- Autonomy with air cushion: 30h- Autonomy without air cushion: 100hThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: TRUMPF Model: TruLaser 5030 Classic Year of Manufacture: 2007 Laser Power: 5000 W Operating hours: 55,874 h (of which only 23,565 h were used for cutting) Operation mode: exclusively single-shift operation Maintenance: carried out regularly and exclusively by Trumpf Equipment: includes 2 interchangeable pallets Electrical Specs: - Supply: 400 V / 50 Hz - Connection Load: 105 kVA - Control Voltage: 24 V - Required Fuse Protection: 3 × 160 A Gas Supply Requirements: - Compressed Air: 7–10 bar - Nitrogen (N₂): 30 bar - Oxygen (O₂): 20 bar Find more here - / Contact us at -

x-travel: 1600 mmy-travel: 4000 mmz-travel: 1200 mmworkpiece weight: 3500 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 Sigma value:: +/-0,18 µmserial number: 1018 pin size: 50 mmMesstaster Hexagon Manufacturing intelligencem&h RWP 20.50-M #101810 Nm max.7Lbf.ft. max.The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of saleapply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5.000 mmy-travel: 3.100 mmz-travel: 1.200 mmControl: HEIDENHAIN TCN 530 HSCI table surface area: 5.000 x 2.000 mmT-slots: 11 T - slots - width: 22 mmtable weight: 30.000 Kgrapid traverse X-axis: 20.000 mm/minrapid motion - y-axis: 30.000 mm/minnumber of spindle speeds: 6.000 U/min/rpmSpindle power: 32 kWtaper ISO: Kegel ISO 50 Tools changer: distance between columns: 2.800 mmInternal cooling system: 20 bartotal power requirement: kWweight of the machine ca.: 65 tdimensions of the machine ca.: 15.100x6.200x6.250 mmHead UAD II positioning 0.1º / 0. 1ºSpeed ranges 2Tool clamping HydraulicHead 2 – Vertical mandrilATC positions 302 longitudinal chip conveyors1 cross chip conveyorPortable handwheelLaser tool presetterThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 500 mmwidth: 490 mmheight: 75 mmtotal power requirement: . kWweight of the machine ca.: . tdimensions of the machine ca.: . mMagnetic clamping plate electric with cable and 1 box of magnetic prismsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us Morethan 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.