other metal working machines used for sale (10,346)

weight of the machine ca.:11,2 tone spindle

Auction-ID: A1-40979-40

tube diameter:40-90 mmwall strength:20 mmweight of the machine ca.:11 tdimensions of the machine ca.:4 x 1,6 x 1,35 mbending radius max.:270 mmThis machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure valve  ...

screw size:60 mmclosing pressure:3500 kNweight of the machine ca.:25,5 t

Technical data Manufacturer: FRANK Model: 500 Year of Make: 1968 Machine Type: Rockwell Hardness Tester (Benchtop Type) Configuration Content includes: - FRANK Hardness Tester Model 500 - Lever press - Test weights - Test plates / reference plates - Various support tables and anvils - Operating documents - Other accessories according to illustrations Scope of Delivery 1 position consisting of: Hardness tester FRANK 500 built in 1968 including lever press, test weights, test plates, support tables, documentation and other accessories according to photo documentation. Condition Used, untested. Sold in the existing condition according to pictures. Auction-ID: A1-48536-74

Auction-ID: A1-48851-1185

TSCHORN V2 3D probe, precision instrument used for zeroing, centering and alignment in machining. Widely used in: CNC milling machining centers Precision mechanics Essential tool to improve the accuracy and speed of positioning parts. Auction-ID: A1-47291-60

Set including a precision gauge and a depth gauge, intended for tracing and measuring in the mechanical workshop. Set suitable for: part tracing dimensional control precision work Auction-ID: A1-47291-34

diameter:210 mmweight of the machine ca.:0,05 tturning speeds:4200 Bore:75 mmclamping diameter:254 mmdimensions of the machine ca.:0,6 x 0,5 x 0,4 m2-jaw power operating chuck with draw pipe and various jaw sets.

TESA 20-40mm inner micrometer set, supplied with calibration standard rings, allowing bore measurements with high accuracy. Professional set suitable for: Small diameter control fine metrology Precision mechanics Auction-ID: A1-47291-40

Technical data Manufacturer: Venti Oelde Type: SHEV 160 Machine Type: Wet dust extractors Year of Make: 1998 Nominal volume flow: 1,600 m³/h Total pressure difference: 15 mbar Motor power: 3 kW Speed: 2,850 rpm Mains voltage: 400 V Degree of protection: IP54 Weight: 160 kg Configuration Wet separator with fan Control cabinet Water connections Pipe connections for suction line (without piping!) Standing frame Scope Venti Oelde Wet Dust Extractor RWA 160 Control cabinet Auction-ID: A1-48536-14

Cutting bench cutting scissors sheet metal scissors Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year of construction: 2008 Control: Delem DAC-350 Working width: 4050 mm Max. plate thickness: 13mm Incl. documentation and accessories Incl. conveyor belt for materials at the back Machine size: 4800x2400x2650mm Machine weight: 15000kg Auction-ID: A1-40979-35

Set of 2 TESA Twin-Cal IP67 digital calipers, high precision instruments for mechanical measurements. Professional equipment suitable for: Precision mechanics Quality Control Industrial workshop The IP67 standard guarantees excellent resistance in workshop environments. Auction-ID: A1-47291-53

bore capacity in steel (diameter):12 mmthroat:300 mmbore stroke:80 mmtotal power requirement:1,5 kWweight of the machine ca.:1,2 tdimensions of the machine ca.:0,6 x 0,7 x 2,1 mAppr. 100 year old column boring machine, complete overhould and ready to operate- swivel table, base table- taper tool chuck- base motor with drive belt to overhead spindle

x-travel:650 mmy-travel:450 mmz-travel:420 mmcontrol:MAKINO Hyper i U-axis:± 75 mmV-axis:± 75 mmmax. size of workpiece LxWxH:1000 x 800 x 400 mmworkpiece weight:max. 1500 kgTable dimensions:910 x 710 mmweight of the machine ca.:5 tDimensions (L/W/H):3 x 3 x 2,3 mmMemory:10 GB Wire EDM in good condition.

bore capacity in steel (diameter):40 mmarm length:1250 mmworkpiece height max.:1390 mmDist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mmDistance between spindle axis and column:350 - 1260 spindle taper:4 MKRange of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mmtotal power requirement:3,5 kWdimensions of the machine ca.:2150x1070x2840 mfeed:0,09 - 1,5 m/minweight of the machine ca.:3 t

length:1600 mmwidth:1000 mmplate height:200 mmweight of the machine ca.:1 tdimensions of the machine ca.:1,6 x 1,0 x 1,3 mHardstone measuring plate with support desk and 2 tailstocks

working area:2500 mmFree moveable 6-axis measuring device- operating software- W-Lan- ball tracer

Basket size LxWxH:600 mmMax. basket weight:80 kgNo. of washing chambers:1 Temperature for washing water:60 °CElectrical heating power:4 kWtotal power requirement:5 kWLoading:Höhe bis 300 tank capacity:50 lCapacity:60 l/minMachine size LxWxH:0,75 x 1,0 x 1,2 mStainless steel high pressure cleaning machine for industrial use with basket diameter 600 mmWorkpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets- pneumatic spring supported machine lit- stainless steel driven basket- spraying bars and pump stainless steel design- loading basket with Jog function

Auction-ID: A1-40979-42

faceplate diameter:4000 mmswing diameter:4300 mmturning height:2500 mmmax. workpiece weight:63 ttotal power requirement:125 kWweight of the machine ca.:134 tdimensions:6100x10400x8400 mmUsed Vertical Turret Lathe with 2 plungers and CNC Siemens 840 table is hydrostatically. Machine equipped with a grinding head. CNC was overhauled in 2000.

GF AgieCharmilles Spare Parts Package – Original Spare & Wear Parts for EDM Machines For sale is an extensive original spare parts package for GF AgieCharmilles EDM machines. The spare parts come from an industrial company and have been built up over many years as a spare parts warehouse. Numerous components are in their original packaging or have been carefully stored. Scope of delivery (excerpt) Original GF AgieCharmilles spare parts Mechanical Assemblies Sensors Motors and drive components Pneumatic and machine parts Wear parts Various original spare parts in cardboard packaging The scope of delivery corresponds to the parts shown. Condition Used or partially unused (depending on the spare part) Neatly stored Sale due to stock liquidation Functionality untested. Auction-ID: A1-48900-5

Auction-ID: A1-48851-1122

TESA 11-20mm inner micrometer set, supplied with calibration standard rings, allowing bore measurements with high accuracy. Professional set suitable for: Small diameter control fine metrology Precision mechanics Auction-ID: A1-47291-39

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 1800mm

Technical description :- RAPID ACTION DOOR - Height = 2000mm- Width = 2000mm

Pressure:175 tchamfer lenght:4100 mmdistance between columns:3600 mmcolumn arm:410 mmram stroke speed:180 mm/secreturn speed:135 mm/secworking speed:10 mm/secwork stroke:275 mmoil volume:200 ldayligth:550 mmtable height:900 mmtable width:90 mmtotal power requirement:15 kWweight of the machine ca.:12000 kgdimensions of the machine ca.:5100 x 2150 x 2850 mm

DIMENSIONS / WEIGHTS:. - total height:1000 mm

DIMENSIONS / WEIGHTS:. - total height:900 mm