milling machines used for sale (2,541)

Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles.- Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines- Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases- One sole operator can control the DUPLEX milling machines- Reduced space and investment requirement comparing with two single machines- Fast investment amortisation due to the high productivity- Duplex solution admits different configurations: single working area, pendulum working areasFor machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo

- Seperate coolant and frequency converter- Last service & Test Log in 2018- Run out in 1 uM

- Universal head (U-25)- Coolant system- Hydraulic tool clamping

This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details.

Key data: 700 mm, 250 mm, 350 mm

Beautiful Rambaudi V2 XYZ= 700x250x350 The stroke of the upper ram is 400 mm Table dimensions 1070x300mm Quill with R8 cone Feeds and rapids on X Rapids on Z Feed up/down on the quill Spindle speed 65 to 4750 Head can turn Automatic Bird Lubricator DRO on 3 axes Some tools

Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested

OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information.

This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information.

Indexing faceplate Hand operated Maualy operated Plate diameter 500mm T-Slot 19 mm Weight 185 kg

Tool Milling Machine Cover FP4MK 2203 Travel XYZ: 500-400-400 mm Spindle mount: ISO 40 Spindle speeds: 50-2500 Universal Rotary Table 2038 incl. Angle Counter VRZ560 Active Digital Display 3 Axes Heidenhain TNC113 Hydraulic drawbar for DIN 2080 Quill with 90 mm stroke Coolant system Incl. vice Weight approx. 1700 kg Year of construction approx. 1992

Key data: 4230 mm, 2100 mm, 850 mm

X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg

Key data: 1000 mm, 500 mm, 530 mm

Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

Producer TOS Tjechië Type FNK25A Table size 250 x 1300 mm Movement X=axis 800 mm Movement Y=axis 350 mm Movement Z=axis 450 mm Spindle taper SK 40 DIN 2080 movement quill 125 mm Spindle speed 56 -4500 Rev/min. Table feedrate X-Y-Z as Yes Voeding Pinole Yes Power 4 kW Dimensions L x W x H 2665 x 1980 x 226 mm Weight 1,760 Kg

x-travel: 700 mmy-travel: 800 mmz-travel: 800 mmcontrol: Siemens 840D total power requirement: kWweight of the machine ca.: 18,5 tdimensions of the machine ca.: 5,2 x 3,8 x 3 mBrand Deckel MahoMachine no F630Type DMC 70 H duo BlockCNC Brand SiemensCNC Type Siemens 840D powerlineYear of make 2006Table length 500 mmTable width 500 mmNumber of pallets 2X 700 mmY 800 mmZ 800 mmSpindle taper SK 40Speed maximum 18.000 RPMMachine size 5.200 x 3.800 x 3.000 mmMachine weight 18.500 kgTool magazine positions: 120The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mmy-travel: 450 mmz-travel: 400 mmcontrol: Siemens 840D total power requirement: 13/9 kWweight of the machine ca.: 4,7 tdimensions of the machine ca.: 3,4 x 2,5 x 2,2 mBrand DMG Mori SeikiMachine no F652Type DMU 50 EcolineControl Siemens 840DYear of make 2012Table width 500 mmTable diameter 630 mm øTable adjustable in degrees X 500 mmY 450 mmZ 400 mmSpindle taper SK40Speed minimum 20 RPMSpeed maximum 10.000 RPMMaximum table load 200 kgChip transport Machine size 3.400 x 2.500 x 2.200 mmMachine weight 4.700 kgTool magazine positions: 30B-as: -5/+110 °C-as: 360 °Engine power: 13/9 KwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

x-travel: 30000 mmy-travel: 3600 mmz-travel: 1900 mmControl: Heidenhain TNC 530i turning speed range - milling: 4000 U/mintaper: DIN69871+AD spindle drive: 46 kWfeed range - spindle head: 10000 mm/minrapid traverse: 25000 mm/minfloor plate size:: 30000x3000 mm total power requirement: 85 kWweight of the machine ca.: tdimensions of the machine ca.: mWoeking hours: 9332Machine number: 5619Chipconveyor: 2xAngle plates: 4xBox tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mmy-travel: 1500 mmz-travel: 2500 mmControl: Heidenhain Itnc 530 total power requirement: 96 kWweight of the machine ca.: 55 tdimensions of the machine ca.: mBrand: CORREA/ANAYAKTyp: HVM 80Build in : 2014travel X/Y/Z 8,000 x 1,500 x 2,500 mm,Spindel : max. 6000 RpmSpindelpower 28 Kwas extra :high frequency spindle, type HFS IMT Mold, max. 26,000 rpm, max. 11 kW,table dim. (floorplates)8,000 x 2,500 x 300 mm, T-slots 22 H12, distance T-slots 250 mm, table load max. 15,000 kg/m², distance spindle - column max. 1,675 mm, feeds X/Y/Z max. 30,000 mm/min,Total power 96 Kwmachine weight 55,000 kg, column 12,000 kg, platen 16,000 kg, 2x CNC screen control, make Heidenhain, type CNC I 530, autom. tool changer, chain type, max. 60 tools, tool holder SK50, tool weight max. 25 kg, tool L max. 400 mm, radio manual control panel, make Heidenhain, type HR-550, telediagnosis system, aut ...

x-travel: 6300 mmy-travel: 1200 mmz-travel: 2000 mmControl: total power requirement: kWweight of the machine ca.: 57 tdimensions of the machine ca.: 7000x1300x5000 mmBrand: AnayakType: HVM7000CNC brand: HeidenhainYear of make: 1997Table length: 7.040 mmTable width: 1.000 mmX: 6.300 mmY: 1.200 mmZ: 2.000 mmmax. 3000 RpmMachine dimensions (lxwxh): 7000 x 1300 x 5000 mmMachine weight: 57.000 kgincluding 6 angleplates 2500 x 700 mmthis machine is in perfekt working order and can be inspected under powerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

x-travel: 450 mmy-travel: 300 mmz-travel: 240 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: MatheysType: 2BTable length: 850 mmTable width: 235 mmX: 450 mmY: 300 mmZ: 240 mmMaximum speed: 2.500 RPMVariable adjustable speedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 640 mmy-travel: 200 mmz-travel: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mBrand: MilkoType: 12Table length: 1.000 mmTable width: 220 mmX: 640 mmY: 200 mmZ: 400 mmSpindle taper: ISO 40Maximum speed: 1.700 RPMDigital readout: FagorAutomatic feeding on XMachine is equipped with Huron headThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead