milling machines used for sale (2,355)

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine.

This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, its ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine.

This 5 axis Mazak Variaxis 630-5X was manufactured in 2007. A universal machining centre featuring a 2-pallet changer, 80-tool magazine, and a Renishaw probe. It supports a 70 bar internal cooling system, enhancing operational efficiency. Ideal for those looking to enhance their machining capabilities. Contact us for more information about this machine.

This 3-axis Mazak VCN 510C was manufactured in 2003. It features a spindle speed of 12,000 rpm with an SK40 taper and a tool magazine with 30 positions. The table size is approximately 1300 × 550 mm, and it includes a cooling system with 15 bar internal pressure. Consider the opportunity to buy this Mazak VCN 510C vertical machining centre. Contact us for more information.

This 3-axis Hurco VMX 24t was manufactured in 2007. It features a SK40 tool holder and a spacious 610 x 508 x 610 mm travel in the x, y, and z axes, complemented by a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 24t machine we have for sale. Contact us for more information.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.

This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information.

This 3-axis MILLTRONICS VM24 vertical machining center was manufactured in 2001. It features a table size of 610 x 1140 mm, X/Y/Z travel of 1016/610/610 mm, and a spindle motor with 7.5/11 kW power. The machine supports a maximum workpiece weight of 900 kg and includes a 20-station tool changer. Ideal for detailed machining tasks. Contact us for more information about this machine.

This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information.

This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information.

This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information.

Key data: 400 mm, 375 mm, 250 mm

With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.

An old universal milling machine Vernier is available. Travel X/Y/Z: 1300mm/600mm/600mm, table dimensions X/Y: 1600mm/500mm, spindle interface: SA50, speed: 1600rpm, power: 15kW. An on site inspection is possible.

Travel X/Y/Z: 600mm/400mm/400mm, spindle taper: ISO40, quill stroke: 100mm, speed: 3150rpm, machine dimensions X/Y/Z: approx. 2000mm/1800mm/1900mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 600mm/400mm/400mm, quill stroke: 1000mm, spindle taper: ISO40, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2100mm/1750mm/1750mm, weight: approx. 1750kg. Documentation available. On-site inspection is possible.

Key data: 750 mm, 650 mm, 560 mm

Universal CNC Machining Center Manufacturer: DMG Mori Type DMU75 Monoblock Year of manufacture 2014 IBN 2015 Control Heidenhain iTNC530 Control a 23.075h Engine a 22.287h Program run 12.946h Operating hours 12.891h Travels X/Y/Z 750/650/560mm Table size 800 x 650mm Table load 600kg C-axis b-axis -120° + 120° Tool holder HSK63 60 Compartment Tool Magazine IKZ 40bar Blum Wireless Push Button Electronic Handwheel HR410 Belt filter system 500l Motor power 35kW Torque 130/86/0 Machine is in a used very good condition. Geometrically very good. Without vice, without tool holders

Key data: 800 mm, 510 mm, 550 mm

Universal Machining Center Manufacturer: Reiden Type BF1 Year of manufacture 1997 Control Heidenhain tnc 407 Travel X/Y/Z 800/510/550 Clamping surface D 630mm Table load 800kg max. speed 3100rpm 24 Way Tool Changer Tool holder SK40 Chip conveyor Monitor new, central lubrication new, rotary encoder rotary table new, glass scale X-axis new. The machine is 100% functional, ready for immediate use. For more information, I am always available at 01778957069.

GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineWheel Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeUniversal head with controlled B-axisContinuously positioning universal milling head (B axis) with integrated motor spindle  ...

GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineChain Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeCabineFull protection cabinExtension Z travel range t ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmFloor space/WeightDimensions (L x W x H)5,86 x 2,07 x 2,3 mWeight approx.12000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment850 NmWork spindle (left)Spindle noseFlat fla ...

Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle speed-12000 rpmSp ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power ...

A CNC universal milling and boring machine Decke Maho is available. Travel X/Y/Z: 500mm/400mm/400mm, power: 7kW/5kW, torque: 88Nm/63Nm, speed: 4500rpm, tool interface: SK40, feed rate: 5m/min, rapid traverse: 5m/min, rotary table diameter: 700mm, max. workpiece height: 500mm, max. table load: 200kg, machine dimensions X/Y/Z: approx. 3200mm/1650mm/2550mm, weight: approx. 2600kg, control: Heidenhain TNC 124. Documentation available. On-site inspection is possible.

A Rotox lock case milling machine with multi-spindle milling unit is available. Travel vertical/horizontal: 265mm/125mm, max. profile width: 125mm, max. profile height: 50mm, speed: 9000rpm, machine dimensions X/Y/Z: approx. 750mm/700mm/1700mm, weight: approx. 200kg. On-site inspection is possible.

A CNC 3-axis universal milling machine Deckel (DMG Mori) is available. Travel X/Y/Z: 1200mm/600mm/500mm, tool holder: SK40, speed: 5000rpm, feed rate: 10m/min, rapid traverse: 10m/min, table dimensions X/Y: approx. 1600mm/675mm, max. table load: 2000kg. Machine dimensions X/Y/Z: approx. 3300mm/2400mm/2400mm, weight: approx. 7000kg, control: Grundig Dialog 11. An on-site inspection is possible.

CNC portal milling machine Droop & Rein FP160/2 – technically perfect, dismantled Description: For sale is a Droop & Rein FP160/2 CNC portal milling machine, built in 1965, completely overhauled and converted to CNC by the Rottler company in 2003 (investment at the time: €750,000). The machine is equipped with a Heidenhain TNC 430 control system and a Heidenhain LB 382 C length measuring system and guarantees a high precision of ±0.005 mm. All components are technically flawless. The machine is currently dismantled and disassembled in our warehouse in Riesa, Germany, so that assembly, assembly and adjustment are required before commissioning. A viewing of the individual parts is possible. Technical data: Manufacturer: Droop & Rein Type: FP160/2 Item no.: 2698 Year of construction: 1965 (CNC conversion 2003) Control: Heidenhain TNC 430 Length measuring  ...

A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible.

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Control Heidenhain TNC 640 Speed [rpm] 12000 Travel X/Y/Z [mm] 400/350/350 Spindle: Technology Direct Drive Speed 12,000 rpm Power (max.) 13 kW Torque (max.) 95 Nm Tool holder SK40 NC swivel rotary table: B-axis -50°/+110° C-axis 360° Clamping surface ø450 mm Table load (max.) 200 kg General: Tool magazine 48 stations Rapid traverse in X/Y/Z 48 m/min Equipment/accessories: Direct displacement measuring system (glass scales) in X/Y/Z Chip Management Chip Conveyor Coolant management IKZ system with filter and high pressure, 30 bar Workpiece Measurement Probe, Heidenhain TS740 Tool Measurement Laser, Renishaw NC4 TX Setup operation Electronic handwheel Other equipment spindle coolers Other accessories Div. gebr. Tool holders