milling machines used for sale (2,364)

Inv. Num. : 8658 Type: AF 221 Producer: Elumatec Created: 1997 Parameters: Max Speed: 2800 1/min

Inv. Num. : 8631 Type: OFA 16 A Producer: TOS Created: 1976 Parameters: Machine weight: 3550 kg

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

Inv. Num. : 8514 Type: CLX 450 TC Producer: DMG Created: 2022 Parameters: Switch-on hours: 13312 h Hours: 8547 h Maximum spindle speed: 5000 1/min X-axis travel: 750 mm Y-axis travel: 200 mm Travel Z axis: 1000 mm Max. workpiece diameter: 400 mm Maximum length of the workpiece: 1100 mm Machine weight: 9200 kg

Inv. Num. : 8441 Type: KOMBI 1000 Producer: Reckermann Generated: Parameters: Work table length: 1370 mm Work table width: 400 mm X-axis travel: 1000 mm Y-axis travel: 350 mm Travel Z axis: 450 mm

Table dimensions ... 900 x 500mm Axis X ... 700mm Axis Y ... 500mm Axis Z ... 500mm ISO 40 Spindle speed ... 0-3150 rpm L x W x H ... 2220x2115x2120mm Machine weight ... 2550kg The machine is in good condition, possible to test under power.

Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.

Control Siemens ... Sinumerik 840D Sl Table dimensions ... 1600mm Axis X ... 8000mm Axis Y ... 1300mm Axis Z ... 1800mm Spindle speed ... 20-4000 rpm ISO 50 cooling ... 30bar Rapid traverse ... 35m/min Machine weight ... 36500kg

Inv. Num. : 8284 Type: CS 105 Producer: MECOF Created: 2003, GO 2023 Parameters: Work table length: 6020 mm Work table width: 1060 mm Milling spindle speed: 5-2000 1/min Maximum table load (uniform): 8000 kg X-axis travel: 8300/9300/10300 mm Y-axis travel: 760 mm Travel Z axis: 1200/1700 mm Machine weight: 36000 kg Equipment: Straight extension milling head Universal milling head AC1 Additional table (2 pieces) Additional bracket (2 pieces) GO 2023: Extension head Compensating cylinder leak Transfer 2018: Modification of the steering and drive motor

Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg

Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg

Inv. Num. : 7816 Type: FGS 130 Producer: Droop Created: 1983 Parameters: Work table length: 4200 mm Work table width: 1200 mm Maximum workpiece weight: 10000 kg Spindle drive power: 22 kW X-axis travel: 3000 mm Y-axis travel: 650 mm Travel travel Z-axis: 350 mm Machine length: 7000 mm Machine width: 4000 mm Machine weight: 39500 kg

Inv. Num. : 7770 Type: KFU 3000 Producer: Zayer Created: 1990 Parameters: Operating system: HEIDENHAIN TNC 415 B Table length: 3000 mm Table width: 1000 mm Maximum table load: 10000 kg Max. Speed: 3000 1/min Axis X: 2700 mm Axis Y: 1000 mm Axis Z: 1000 mm Machine dimensions: 4000 x 2500 x 2800 mm Weight: 18600 kg Equipment: Staples (approx. 40 pieces) Vises (2 pieces) Angle (2 pieces) Clamping Blocks (2 pieces)

Inv. Num. : 6633 Type: RLG 470-2 Producer: LENZ Created: 2006 Parameters: Control System: Screen Meyer Sinudyn Maximum vertical spindle speed: 60000 1/min X-axis travel: 470 mm Y-axis travel: 650 mm Z-axis travel: 50 mm Accuracy: 0.003 mm Machine height: 1550 mm Machine length: 1820 mm Machine width: 1720 mm Machine weight: 2500 kg Equipment: Technical Documentation Temperature Unit

Inv. Num. : 7310 Type: KX3 Producer: Numco Generated:- Parameters: Control system: MACH 3 Maximum bore: 20 mm Work table length: 450 mm Work table width: 160 mm Maximum vertical spindle speed: 5000 1/min X-axis travel: 300 mm Y-axis travel: 150 mm Z-axis travel: 290 mm Cone: MK3 Machine height: 1750 mm Machine length: 800 mm Machine width: 780 mm Machine weight: 220 kg

Inv. Num. : 7298 In good technical condition.

Inv. Num. : 7252 Type: SMX Producer: REXIM Created: 2018 Parameters: Work table length: 1350 mm Work table width: 355 mm Maximum table load (uniform): 600 kg Maximum distance between the spindle and the table: 520 mm

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

Inv. Num. : 6905 Type: UNI 1000 Producer: Reckermann Created: 1993 Parameters: Control system: Heidenhain TNC 135 Working table length: 1500 mm Working table width: 400 mm Minimum vertical spindle speed: 40 1/min Maximum vertical spindle speed: 2000 1/min X-axis travel: 900 mm Y-axis travel: 350 mm Z-axis travel: 400 mm Spindle power: 7.5 kW Total power requirement: 14.5 kW Machine height: 2200 mm Machine length: 2200 mm Machine width: 2300 mm Machine weight: 3800 kg Equipment: Central lubrication Lighting Technical Documentation

Control NCT ... 104 Clamping table surface ... 3100x1000mm Axis X ... 3000mm Axis Y ... 1200mm Axis Z ... 1000mm Spindle speed ... 0-4000 rpm The machine is in good condition, possible to test under electricity.

Brother Speedio S700X2Year of manuf. : 2022 Control : Sonstige Brother C00 Speed : 10000 rpmMovement X/Y/Z : 700/400/300 mmTool holder : BBT 30 ____________Description:Mainspindle:Technology:DirectdriveSpeed:10.000 rpmPower (max.):26,2 kWTorque (max.):92 NmTaper:BBT 30Workingtable:Clampingsurface:800 x 400 mmTableloading (max.):250 kgIn general:Toolmagazine:21 StationsRapid travers in X/Y/Z:50/50/56 m/minEquipment/Accessory:Chipmanagement:Chip coveyorCoolingmanagement:Minimumlubrication (IKZ), Company Lubrix V54.-Axis:Lehmann EA-510 with CounterbearingWorkpiececlamping:Hydrulic, 80-210 barContactcontrol:PneumaticAutomationinterface I:Automatic Door (electrical)Automationinterface I:RobotinterfaceOilmistseparation:Mechanical extraction, company Sara UC1 SDColumnextention:150 mmSetup operations:Electronic HandwheelFurther Equipment:Trafo

Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°C lampingsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder

Exeron HSC 600Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpmMovement X/Y/Z : 650/550/400 mmTool holder : HSK-E40 ____________Description:Spindle:Technology:MotorspindleSpeed:42.000 rpmPower (max.):13,5 kWTaper:HSK-E40Workingtable:Clampingsurface:530 x 900 mmTableloading (max.):600 kgIn general:Toolmagazine:60 StationsRapid travers in X/Y/Z:50 m/minEquipment/Accessory:Positionsensor:Direct scales in X/Y/ZChipmanagement:ChiptrayCoolingmanagement:MinimumlubricationWorkpi ecemeasurement:Touch probe, Renishaw OMP 400Toolmeasurement:Laser, BLUMSetup operations:Electronic handwheelFurther Equipment:Spindlechiller

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

Matec 30 HVKYear of manuf. : 2012 Control : Siemens 840 D Speed : 12000 rpmMovement X/Y/Z : 1300/600/800 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2012Control system:Siemens 840 DTraverse X/Y/Z:1,300/600/800 mmSpindle speed:12,000 rpmSpindle:Technology:Direct drive spindleSpeed:12,000 rpmPower:30 kWTorque:191 NmTool holder:HSK 63NC swivel head:B-axis:+/- 105°Clamping torque:4,200 NmNC rotary table:C-axis:360 °Drive:Direct drive (torque)Clamping surface:630 mmTorque:600 NmMax. table load:1,000 kgTool magazine:Technology:Chain magazineTool changer:Double gripperNumber of stations:48Tool diameter max.:70 (130) mmTool length max.:340 mmEquipment:Position sensors:Direct scalesChip disposal:Chip conveyorCoolant supply:Internal coolant system, 40 barWorkpiece measurement:Renishaw Touch probeTool measurement:Blum LaserEmulsion mist separator:LTA, e ...

Belotti FLU 2617Year of manuf. : 2023 Control : Siemens 840Dsl Speed : 24000 rpmMovement X/Y/Z : 2600/1700/950 mmTool holder : HSK-A63 ____________Description:Spindle:Technology:Swivelhead with MotospindleSpeed:24.000 rpmPower (max.):15 kWTorque (max.):14,3 NmTaper:HSK-A63A-Axis:+/- 120°C-Axis:270°In general:Toolmagazine:18 stationsClampingsurface:2.350 x 1.700 mmRapid travers in X/Y/Z:80/80/60 m/minEquipment/Accessory:Workpiecemeasurement:Touch probe, m&h RWP 20.50Toolmeasurement:Laser, HexagonToolbreakagecontrol:Probe, m&h TS 35.20Setup operations:Electronic Handwheel3D-Extruder:CEAD S25Granulatedryer-/conveyor:VismecFurther Accessory:Spindlechiller

GeneralUniversal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI Technical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minWorking area 1Longitudinal1150 mmCross710 mmVertical710 mmTool changerApplicationVertical Tool changer planevertical Type of gripperPick up Number of tools32 MiscellaneousClamping SystemHSK-A 63 Floor space/WeightDimensions (L x W x H)6,0 x 5,0 x 2,7 (7,0 x 5,5 x 3,5) mWeight approx.10700 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC rotary table integrated in rigid tableType of Measuring system Direct measuring systemMotor spindle 10,000 rpmMotor spindle SK 40 10,000 rpm4. Axes (swivelling range) +/- 360/000,1 degreeRotation speed max.4. Axis 30 rpmDistance between T-Slots 63 mmNumber of Slots 11Slot width 1 ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention nece ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Travel X/Y/Z: 2500mm/1000mm/770mm, table dimensions X/Y: 3200mm/1000mm, spindle speed: 8000rpm, tool positions: 40, tool holder: SK40, max. workpiece weight: 3000kg, feed rate: 30m/min, coolant pressure: 20bar. Machine dimensions X/Y/Z: approx. 6500mm/4500mm/3700mm, weight: approx. 21000kg, control: Heidenhain iTNC 530, control hours: 67334h, machine hours: 56616h, operating hours: 15872h. Including internal coolant supply, 3D measuring and infrared probe, chip conveyor and linear measuring system. Documentation available. An on-site inspection is possible.