machines and plants for process engineering used for sale (7,405)

General SKU900WP151 TypeTXF U50PTT-5 Mach.No.11-706216 Specified Features - Diaphragm pump Inlet8mm Outlet8mm General LocationBarneveld Floorspace0,3X0,3 M Total height0,4 M Weight5 KG CEcheckDiaphragm pumpsGeneric medicinesFine chemicalsOther chemicalBiotechnologyCatalysts & fillersFeed additivesDetergent & surf.CosmeticsDairyBiopharmaceuticalAPIPaints & coatings-Pumps > Diaphragm pumpsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > BiotechnologyIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > DairyIndustries > Pharmaceutical > BiopharmaceuticalIndustries > Chemical > APIIndustries > Chemical > Paints & coatingsBrand > - What you can expect fr ...

Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.

Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An o ...

Air-Operated Double-Acting High Pressure Pump The Resato P200-100-2 is an air-powered, double-acting high-pressure pump used for the pressure generation of liquids in various industrial applications such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump works on the principle of an automatic reciprocating differential piston to convert compressed air into high-pressure fluid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-Operated, Double-Acting High Pressure Pump Air piston diameter: 200 mm Gear Ratio: 100 Flow rate:6.6 l/min Weight: 21 kg Year 2019 Max. outlet pressure Controlled by the air supply pressure, at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type chart for P200-100-1/P200-100-2). Compatible media Suitable for water, oil or an emulsion of both. Can also b ...

Side channel compressor, two-stage The VASF 2.50/2-0.AC230 is a turbo machine with VARIAIR frequency converter that offers high performance with 100% oil-free and contact-free operation. These side channel blowers are low maintenance, highly efficient and require minimal maintenance. Features VARIAIR Frequency Inverters Non-contact compression Compact design Intake and exhaust mufflers Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Pros Exact volume flow through speed control Low operating and exhaust gas temperatures Quiet operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Pressure relative: +560 mbar Inverter power: 0.65 kW Hz: 50... 300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter More items - new and used - can be found in our shop! International sh ...

FrymaKoruma (ProXES) Type DinexH 200 vacuum high shear emulsifier for the production of high-quality emulsions, suspensions, creams and lotions, total volume 200 litres, usable volume 160 litres, minimum volume 15 litres, usable operating pressure product chamber -1.0/0.0 bar, usable operating pressure double jacket -1.0/+6.0 bar, scraper agitator (single-arm, counter-rotating scraper agitator, direction reversal for cleaning, flow breaker with perforated mixing blade mounted in the lid, PTFE scraper plate, agitator drive 1.5 kW, agitator speed fixed), high-performance homogeniser (rotor/stator system, tool size 160 mm, power 22 kW), main vessel lid (domed design, camera installed on the lid, 1 DN 125 sight glass incl. wiper and light, 1 DN 32 vent valve incl. electro-pneumatic valve, 1 pressure transducer, lid closure by means of segment clamp screws), container lid can be lifted, tilte ...

SYMEX P 1000 Agitator Tank Technical data: • Max. filling volume: 1000 l usable volume • Min. filling volume: approx. 250 l (minimum usable volume) • Product: pharmaceutical liquids, aqueous solutions • Operating voltage: 400 V, 50 Hz, PEN • Agitator: 4 kW • Permissible operating overpressure interior: -1 ... +1 bar, • Permissible operating temperature indoors: 95 °C Agitator system • Design: slow-running armature agitator (simplified comb bucket agitator without scraper system) with one (1) • • piece of current breaker; • Possibility to permanently dismantle the agitator and the current jammer when it is not needed. • Stirring tool: armature stirrer, central installation in the container lid • Drive: Bevel gear • Drive power: approx. 4 kW • Speed: approx. 5 ... 20 min-1; Adjustable via frequency converter Current breakers • One (1) ...

Homogenizing Mixer CML50 Key data: • SYMEX CML50 • Working volume: 50 • Anchor agitator with scrapers and breaker 13 ... 111 min-1 • Homogenizer Co Twister • • Pump - Rotor Speed: 300.. 9360 min-1 • • Shear - Rotor Speed: - 9360 .. 9360 min-1 • Circulating line • CIP • Lid Hydraulically liftable • Control via touch display • Heating, cooling, vacuum, ... • New seals • Pharmaceutical version, but can also be used in cosmetics Media supply: • Cooling water flow: approx. 1 m³/h at 3 bar • Cooling water for vacuum pump: approx. 0.2m³/h at min. 2 bar • Compressed air: approx. 1000 L/min at 8 bar • Electricity: 3x400V at 50Hz; 45.0 kVA / 45.0kW • Steam: 6-8 bar, 45kG/h The machine is factory overhauled and can be visited. We supervise your "Turn Key" project, including assembly at your premises and commissioning.

Dissolver Pendraulik Disperlux IP green 037 Power 0.37 kW Speed range 0-12000 1/min Very good ready-to-use condition, straight from production

Heating power : 7.5 KW Drive : 0.37 KW Medium : Water

Vahterus PSHE 5SH-320/1/1 Plate Heat Exchanger Never been installed before!

An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.

Manufacturer: Tomal Type: PolyRex 3.0 Year of Make: 2000 Content: 2 x 1.5 m3 Conveying / Dosing of: Powdered Polymer # Chamber: 2 Control: Yes Material: Stainless Steel Type: Vertical Dimensions: L 1,900/1,050 x W 1,800/600 x H 2,200/2,200 mm Curb weight: 300 kg Tech. Documentation: Yes Condition: Used Price: On request

An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible.

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

A SULT dust extraction and filtration system with cartridges is available. Air volume flow: 3000m³/h, filter area: 84m², air pressure: 6bar, compressed air consumption: approx. 10Nm³/h, max. operating temperature: 70°C, fan speed: 2980rpm, total pressure drop: 4100Pa, number of cartridges: 4. Machine dimensions X/Y/Z: approx. 2000mm/900mm/5000mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.

An untested vacuum distillation unit/solvent recycling unit Lömi for the recovery of organic solvents is available. Volume: 50l, operating volume: 30l, distillation capacity range: 8l-20l/h, max. operating temperature: 250°C, protection: EX, vacuum pump type: LÖ/V 6, max. vacuum pressure: 80mbar. Machine dimensions X/Y/Z: approx. 1450mm/600mm/1800mm, weight: approx. 300kg. An on-site inspection is possible.

Microfiltration System – Bacteria Removal (Dairy Applications) General Information: - Manufacturer: Tetra Pak - Model: Tetra Alcross M - Year: 2005 - Automation: Fully automatic - Application: Bacteria extraction / microfiltration for dairy products System Overview: The Tetra Alcross M is an industrial-grade microfiltration system designed for efficient bacterial and spore reduction in dairy processing, particularly in skim milk applications. Engineered for continuous production, the system utilizes high-performance ceramic double-layer membranes, enabling reliable separation performance and consistent product quality. This technology is widely used in ESL milk production and other high-hygiene dairy processes, where stable filtration performance and sanitary design are critical. The robust construction and proven reliability of the Tetra Alcross platform make it su ...

Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible.

Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Noggerath NSI B 300-S/3 Rake. Fully functional Areas of application & function: Faecal collection points: The main application is the reception and screening of faecal sludge to remove coarse solids. Industrial wastewater: Can also be used for sludge screening of industrial wastewater. Automatic operation: An integrated level measurement system controls the drive of the spiral so that it only runs when needed. Compact design: The NSI-B model is designed as an encapsulated stainless steel unit that is integrated directly into a container. Dewatering: The screenings are dewatered and compacted in a press zone, which reduces the volume and makes it easier to dispose of. Cleaning: A special spiral cleans the screen surface during operation.

A new oil-lubricated rotary vane vacuum pump Busch in the original packaging is available. Suction capacity: 360m³/h, ultimate pressure: 0.5hPa, motor power: 10kW, speed: 1800rpm, oil fill quantity: 6.5l. Machine dimensions X/Y/Z: approx. 1100mm/600mm/450mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Laboratory mixer, new machine --> control panel and control cabinet integrated in the machine housing as a compact machine, with all necessary switching and protective devices. Material : Areas in contact with the product in stainless steel 1.4571 Drive : 1.5 KW Mixing plant : ploughshares; --> Mixer with double jacket, heatable/coolable.

A Schenk Orion filter press with a deflection chamber is available. Number of plates: 85, frame: 100, plate dimensions X/Y: 600mm/600mm, max. filter area with 80 plates: approx. 22m², pipe connection diameter: 50mm, throughput capacity: approx. 30hl-45hl/h, max. throughput capacity: approx. 75hl/h. An on site inspection is possible.

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

Machine name: Filter press used Manufacturer: JKF Kübler Type: KFP 800-40-25K-OA-AU/LG-2 Year of Make: 2017 Design: Side-spar press Press capacity: 470 liters Procedure: Open Filter area: 41.7 m2 Plate format: 800 x 800 mm Number of plates: 41 Panel material: Polypropylene Plate Conveyor: Automatic Cake thickness: 25 mm Closing pressure: 360 bar Dimensions: L 4303 x W 1700 x H 2110 mm Curb weight: 4830 kg Tech. Documentation: Yes Remark: It has been used in electroplating. Accessories: A control cabinet, a control cabinet, a hydraulic system, piston pump, drip plates. Condition: Used Price: On request