basic foodstuffs and animal feeds machines used for sale (674)

OIL PRESS 90 KW, Ã?LPRESSE 160 KW, WÃ?RMEPFANNE W255/7-1, LOOS DAMPFKESSEL 500 KG/H, ELEVATORE, LAGERSILOS, Ã?LTANK 20000 LITER, ETC. tel. +49 1715213204

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

Standing molasser

Holy V-mix, Nautamix, Vrieco-, NAUTA mixer, cone mixing N.M. Holy b.v. V-mix 25,000 PLR New machine of the mixer is on your products (E.g., particle size, bulk density) and environment (E.g. ATEX zoning) adapted. -Capacity: 25,000 litres water filling -Usable volume: approx. 22,500 litres depending on the product properties -Container, lid, swing arm, mixing screw, spout housing made of V2A -Traverse normal steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified

-Blower hammer mill with 45 kW -Rotor should be prepared

Flour scale BÜHLER MWBL EE in different sizes from 24 to 170 Sumtronic II MWEE Spout containers All machines checked and in good condititon.

CHRONOS gross bagging scale 25 kg. Weighs up to 50 kg. 2 x 10 kg weights. The Machine is working very accurate.

Flow balancer Buhler type MZAC-12. 220 volt, in and out diameter 120 mm. We have several of these units in stock, in right and left, and various inlets. All have been tested in our workshop and are technically ok. Outer appearance not fine. Please contact our sales staff. We will gladly advise you and find the right device for your needs.

Drum cleaner type EIRICH with double screen 1.5 m width

Bran centrifugal Buhler type MKLA 45-110, 4 KW, Nr. 218056, V-belt drive 1050 RPM We have several bran centrifugals of different production years in different conditions at various costs in our stock. Just ask. We are happy to support you to find an affordable solution for your requirements.

Europemill stone mill 950 H, 15 kw at 1000 rpm, v-belt pulley diameter 190-5 x 17, flat belt pulley diameter 800, n = 237 rpm, cleaned. Used condition.

Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.

Plansifter MIAG LM 655-155- Maize run, six passages, cleaned Broken frame inserts have been repaired. Good working condition. We also offer a similar machine with nine passages.

Kippkoch boiler with stirrer elektisch of 80 litres up to 500 litres special size 1000 litres or Dampfbeheizt

PVS 125Hui or PVS 150 Hui drive 15 or 22 KW cutting kit or emulsifying module in 125 or 150 mm size available Dre PVS Hui is 125 or 150 an Inotec with an emulsifying module to an equally moderate consistency and ensure smoothness of various products and Proruzieren such as: Paste soup ketchup Mayonnaise Pesto ointments Smoties bread on strokes nut creams and other products

FOOD conveyor belt from the manufacturer IN PREMIUM quality + large stock! -Stable conveyor belt / conveyor belt made of PVC for many purposes, especially for the food industry, with 2 tissue deposits, coated on both sides run page from PVC diamonds profile (rollers band), oil - and grease-resistant! -New, endless welded, in blue (white also available) -Dimensions: 12.330 mm x 400 mm width x thickness 3.2 mm -Special price! On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Hook connection on request. Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More belts, drive belt and flat belt in all other sizes available immediately . We ship worldwide we deliver worldwide, please ask for shipping costs! BELTe ...

IKA works DIS Pax reactor DR 3-13/4, 18.5 kW, 3.000 rpm, capacity up to 20.000 litres / hour, maximum pressure 2.5 bar.

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

PVS 125 Hi micro-cut Feinstzerkleinerer drive 15 KW Produkleistung 300 to 2000 kg or litres an hour depending on the machine can by the fineness of the products directly at the outlet of cooking equipment or tilting boiling pans are connected

PVS 125 H micro cut Inotec drive power 15 KW product performance from 300 kg to 900 kg an hour for various products pesto sauces soups Majnäse and similar

PVS 125 HD micro-cut Inotec Double blade performance drive 30 KW Produkleistung anbänging the refinement until by 1500-3000 kg hour

1 piece NAUTA mixer MBX 20s -Volume ca. 1.600 liters - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of standard steel Virgin -Mixing screw steel Virgin -Spout pneumatically driven new product -Drive motors 4kW & 0.37 of kW Virgin

New machine Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

You are looking for replacement parts for your cone mixer? We have the most common spare parts for various products such as E.g. Nautamix, v mix, Vrieco-mixer etc. in stock, or they can customize quickly and cost-effectively in our workshop. -Mixing augers -Spare or replacement transmission -Spare or replacement swing arms - gears, shafts, seals -Top bearings -Universal joints -Radial storage -Outlets -Etc. In addition, we have a repair and maintenance service. We like to submit a non-binding offer. E-mail: t.roechter@heiligbv

Are you looking for spare parts for your cone mixer? We have the most common spare parts suitable for various brands such as Nautamix, V-Mix, Vrieco mixeretc. in stock, or can produce them quickly and cost-effectively in our workshop. - Mixed screws - Replacement or replacement gearbox - Replacement or replacement of swivel arms - Gears, shafts, seals - Top bearings - Cross joints - Radial bearing - Outlets - Usw. We also have a repair and maintenance service. We would be happy to make you a non-binding offer. E-mail: t.roechter@heiligbv

Large number of used food tanks at a special price! Steel tanks in good condition, above ground, standing on 6 bases. Contents: approx. 60 m ³ / 60,000 litres, coated inside Dimensions: approx. Ø 3.10 m x 8.50 m high, with base approximately 10 m overall height weight: 8, 0 t. The tank is lined with a high-quality, food-approved inner coating, see photo. Completely drainable, manhole, and more. Can be used for liquid fertilizer, as raintank, storage tank for water, for liquid feed, whey, animal feed, pig feed, stillage, potato steam skins, molasses, manure, AHL, ASL, seeping juice, canola oil, cooking oil. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has ...

Alfa Laval nozzle separated including cabinet, 2000, drive 135 kW. Technical specification Max throughput capacity 170 m3/h maximum nozzle flow 65 m3/h feed temperature range 0-100 o C Feed inlet pressure required Max180 kPa installed motor power 135

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

- Capacity 2,000 litres - Motor power: mixing screw:3.0 kW,swivel arm:0.55 kW - Usable volume approx. 1,600 litres (depending on product characteristics) - Container and lid parts are made of stainless steel 1.4301 (V2A) - Swivel arm and transmission parts are made of normal steel - 1st side outlet is made of stainless steel 1.4301 (V2A) - All lubricants are H1 and halal approved and certified