basic foodstuffs and animal feeds machines used for sale (502)

Meyn wing cutter, dimensions: 1450 mm x 950 mm x 650 mm. Incomplete.

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

Nauta Mixer MBX-6R All parts that come into contact with the product are made of stainless steel Swivel arm; Stainless steel Mixing screw; Stainless steel Container; Stainless steel universal joint; Stainless steel Condition: The mixer is not overhauled. We can also offer you a complete overhaul. A viewing is possible at any time.

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

Meijn MC2 selfemptying separator for eggs or eggshells. Cap max 30000 egg/hr. machine is in good condition.

Laska Maschinenfabrik grinder with lifter for 200 liter meat bins, type: WW 200 2, number: M 6909, year of construction: 2000, 400 V, 3 Ph, 50 Hz, 85 A, 43 kW, plate diameter: 200, total dimensions: 2500 mm x 2200 mm x 2650 mm. Including tool trolley with worm, knives and plates, dimensions: 800 mm x 850 mm x 1000 mm.

Laska Maschinenfabrik frozen block grinder with lifter for 200 liter meat bins, type: WWB 200, number: 12489, year of construction: 2007, 400 V, 3 Ph, 50 Hz, 130 A, 68 kW, 55 Ip, plate diameter: 200 mm, Laska Maschinenfabrik lifter, type: BA 24, number: 13027, year of construction: 2009, 400 V, 3 Ph, 50 Hz, 3.5 A, 1.5 kW, 55 Ip, lifting height: 2100 mm, total dimensions: 2500 mm x 2100 mm x 2850 mm. Including tool trolley, diemnsions: 820 mm x 800 mm x 990 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bin, type: VF 830, number: 40246, year of construction: 2017, 200/575 V, 50/60 Hz, 9.6/23.1 A, 8 kW, dimensions: 2000 mm x 1500 mm x 2150 mm. Including extra parts.

Nowicki vacuum cutter with lifter and ejector, type: KN-330 V, number: 51706060, year of construction: 2006, capacity: 330 liter, Busch vacuum pump, type: RA 0160 D 521 QLBC, dimensions: 3350 mm x 3150 mm x 2200 mm. Including switch cabinet.

Handtmann forming machine, type: 510-01, number: 18000261, year of construction: 2014, 400 V, 3 Ph, 50 Hz, 9.0 A, 5.5 kW, dimensions: 2750 mm x 1100 mm x 1500 mm. Including crates with extra parts.

Kronen mobile slicer, type: GS 10, serial number: 2208, year of construction: 2013, 230 V, 1 Ph, 50/60 Hz, 1.8 kW, plastic belt, belt width: 130 mm, clearance: 125 mm x 150 mm, total dimensions: 2500 mm x 600 mm x 1500 mm. Including extra knife.

Nowicki vacuum tumbler, type: MS, serial number: 78, year of construction: 01, volume: 1300 liter, dimensions: 1380 mm x 2120 mm x 1890 mm.

Handtmann vacuum filling machine with lifter for meat bins and case holding device, type: VF200B, number: 3377, 400 V, 50 Hz, 17 A, 6.5 kW, Becker vacuum pump, model: U 1.16 SA-31, serial number: B 1529733, capacity: 16/19 m³/per hour, dimensions: 1800 mm x 1360 mm x 1870 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bins and linking attachment, type: VF300B, number: 1716, 380 V, 50 Hz, 23.6 A, 9.5 kW, type linking attachment: 34-4, number: 7587, Becker vacuum pump, type: U1.16 SA-31, capacity: 16 m³ per hour, dimensions: 1770 mm x 1330 mm x 2020 mm.

Treif dicer, plastic belt, belt width: 250 mm, dimensions chamber: 120 mm x 120 mm x 400 mm, total dimensions: 1910 mm x 1520 mm x 1450 mm.

Laska Maschinenfabrik mobile micro cutter, type: FZ 175, serial number: 14892, year of construction: 2014, 400 V, 3 Ph, 50 Hz, 165 A, inside dimensions bunker: 1000 mm x 1110 mm x 340 mm, total dimensions: 2140 mm x 1180 mm x 1370 mm. Incomplete, missing among other plates and knives.

KT pig scalding and dehairing machine, inside dimensions: 2010 mm x 770 mm x 1050 mm, total dimensions: 3040 mm x 1200 mm x 1500 mm.

Karpowisz pig scalding and dehairing machine with loading system and s/s table, inside dimensions: 1820 mm x 800 mm x 700 mm, total dimensions: 2850 mm x 1000 mm x 1550 mm, dimensions loading system: 2400 mm x 2500 mm x 1250 mm, dimensions s/s table: 2000 mm x 1140 mm x 800 mm.

Holac dicer, type: VA90, 380 V, 3 Ph, 50 Hz, 2.6 kW, weight: 485 kg, capacity: maximum 1000 kg per hour, dimensions chamber: 450 mm x 84 mm x 84 mm, total dimensions: 1495 mm x 1050 mm x 1925 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bins, type: VF 300 B, number: 1231, 380 V, 50 Hz, 23.6 A, 9.5 kW, dimensions: 1950 mm x 1340 mm x 2300 mm.

Laska Maschinenfabrik grinder with lifter for 200 liter meat bins, type: WW 200-2, number: 9745, 220/380 V, 50 Hz, plate diameter: 200 mm, total dimensions: 2500 mm x 1700 mm x 2500 mm.

Handtmann vacuum filling machine with linking attachment, type: VF608, number: 20943, year of construction: 2006, 400 V, 3 Ph, 50 Hz, 5.1 A, 3 kW, total dimensions: 700 mm x 800 mm x 1850 mm. Including crate with parts.

Handtmann vacuum filling machine with lifter for 200 liter meat bins, type: VF200B, number: 4215, year of construction: 1998, 400 V, 50 Hz, 17 A, 6.3 kW, dimensions: 1750 mm x 1350 mm x 2100 mm.

Pek-Mont tumbler, inside dimensions: Ø 940 mm x 1060 mm, total dimensions 1360 mm x 2400 mm x 1860 mm.

Karpowicz cooled vacuum tumbler, model: MK-2000C, serial number: 5252, volume tumbler: 2000 liter, ZTP TEPRO vacuum pump, type pump: AT 40 A, serial number: 1293, year of construction: 2015, capacity: 38 m³/h, dimensions tumbler: 3500 mm x 1650 mm x 2050 mm, dimensions cooling unit: 970 mm x 580 mm x 940 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bins, model: VF200B, number: 13542, year of construction: 2002, 400 V, 50 Hz, 17 A, 6.5 kW, dimensions: 2000 mm x 1340 mm x 2250 mm.