sheet metal working used for sale (3,308)

Compact slitting line, with uncoiler, loading prism, pressure arm AH 1500/5000 kg, clamping range 480 - 550 mm, with 3 arched tables, with 4 overflow tables, with 2 bases, with 2 stairs, with guillotine shears for cutting to length, foil holder with brake, with 5 pairs of knives Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.0 mm Color: Blue Total power requirement: 3 x 400 V Machine weight: 9100 kg Dimensions: 11541 x 5300 x 1770 mm Coil weight: 5000 kg Straightening rollers: 7 Number of blades: 5 pairs Straightening rollers at the top: 3 Straightening rollers at the bottom: 4 Speed: 35 m/min Machine Number: K08258

Water Jet Pump Resato PJE-2-4000 Here there is a gebr. Water jet pump that has been standing around unused for over 10 years. The pump costs with an additional pressure converter and an additional control from a cannibalized pump 7,000,-- €. There are also about 100 HD seals. If you want to buy the print translators solo, they cost 1,500 €/piece There is no guarantee, warranty and to avoid misunderstandings the pump must be inspected before collection.

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Technical data approx.: - Max. working width 1020 mm - Max. material thickness at 40 kg/mm², strength 1.5 mm -one. Adjustable back gauge up to 550 mm - Front angle stop - Sheet metal hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

Punching force: 550 kN (e.g. punches 30 m in 16 mm material), with search device via foot switch for punching Cuts 350 x 13 mm or 230 mm on the flat steel shear Projection: 305 mm Two separate footswitches for the punching and shearing side, so punching and shearing can be done independently Support table on the punching side Range of tools is included in the price

Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Knife length: 200 mm Knife sharpened Weight: approx. 1,200 kg

Folding machine good condition, ready for immediate use. For details, please refer to the nameplate

plate thickness: 1,25 mmthroat: 130 mmroll diameter: mmtotal power requirement: 0,75 kWweight of the machine ca.: 180 kgdimensions of the machine ca.: 1,1 x 0,6 x 1,2 mFlanging machine is equipped with:- Emergency switch- Footswitch- 8 pcs. Roll setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24194 Specifications: - Max. working width 2040 mm - Max. material thickness 2 mm - Bending angle approx. 0 - 135 ° - Bending angle lockable with end stop - Upper beam is operated with side hand crank - Max. stroke upper beam 85 mm - Max. adjustment bending beam 80 mm - Bending process is supported by eccentric weight - Space requirement approx. W 3250 x H 1250 x D 450 mm - Weight approx. 1620 kg

for sheet thickness up to: 8 mm Flat Plate: 80 x 12 mm Square bar: 20 mm Round bar: 18 mm Weight approx.: 88 kg Dimensions: 620 x 250 x 380/880 mm high (with/without base)

Key data: 200 mm, 1 mm, 200 mm

Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.

Key data: 2000 mm, 1 mm, 2000 mm

Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.

Key data: 250 mm, 1 t, 1200 mm

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Compact hydraulic guillotine shears, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the alignment and machining of large workpieces precise and easy. It is operated via a foot pedal, which frees up the hands to align the workpiece. Specifications: Cutting length: 1320 mm Sheet thickness: 3.5 mm Strokes / min: 35 - 47 Number of hold-down devices: 9 Pressure hold-down: 2.5 t Front support arms: 1000 mm Back gauge: 600 mm Cutting angle: 1/2 - 2° Motor power: 5.5 kW Equipment: - High-quality, high-alloy scissor blades with a high chromium content - 2-fluted upper blade, 4-fluted lower blade - Hydraulic cutting angle adjustment - Manual cutting gap adjustment (from 4.5 mm) - Generous support arms with adjustable stop - Side stop with double scale - Feeder work table with ball rollers - Full-length front  ...

Key data: 3000 mm, 3 mm

with automatic hold-down device POS 100 E Control for Motorized Backgauge Single-angle stop 2 front support arms adjustable on linear rail Manual cutting gap adjustment 0.5 - 3 mm a sheet metal transport and stacking device is attached under the fence for transporting and depositing the cuttings Compressed air connection required Security fencing and light barrier available Adjustable back gauge 8 - 1000 mm Colour: grey/blue Total power requirement: 32 A with cutting gap adjustment without cutting angle adjustment Power: 3000x3.0 mm, 4.0 mm aluminum, 1.5 mm stainless steel Dimensions: 4000 x 1600 mm Weight: 4000 kg Machine number: 200034 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Key data: 4040 mm, 2 mm

Motorized guillotine shears, with front-adjustable handle, sheet metal depositing to the front Sheet width: 4040 mm Sheet thickness steel: 2.5 mm Sheet thickness aluminum: 4.0 mm Sheet thickness stainless steel 1.5 mm Colour :grey/blue: Total power requirement :32 A Machine weight :3350 kg Dimensions: 4585 x 2592 x 14300 Cutting gap adjustment: manual Automatic hold-down Angle stop :1000 mm Cutting angle: > 1.11 degrees Adjustable back gauge: 0 - 750 mm

plate length: 1550 mmplate thickness: 3,5 mmnumber of rolls: 3 roll diameter: 120 mmtotal power requirement: 2,2 kWweight of the machine ca.: 750 Kgdimensions of the machine ca.: 2,2 x 1,5 x 1,6 mElectrically operated round roller via foot lever,Sturdy, welded construction stand,Rear roller adjustable for conical bending,Rollers are hardened,Top roller can be swivelled to remove the workpiece.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

new ultra-light construction site roll forming machine for double standing seam, with dismountable sides, 2 modules can be used for underfunding, as well as another Tool set for the production of double-sided overlays, so ferves can be used can be manufactured in a single pass (additional tool sets are an option), Sheet width: 720 mm Sheet thickness steel: 0.65 mm Sheet thickness aluminum: 0.8 mm Machine weight: 157 kg Dimensions: 1200 x 1400 x 560 mm Total power requirement: 220 V Colour: turquoise/white Profile height: 25 mm it Width adjustment Roll forming speed: 9 m/min

new standing seam roll forming machine, without length measuring device, without cross shear, emergency stop switch, 7 stations, Sheet width: 250 - 700 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminium 0.8: mm Sheet thickness stainless steel 0.5 mm Machine weight :190 kg Dimensions: 1200 x 900 x 580 mm Total power requirement: 220 V Colour: grey Profile height: 25 mm with width adjustment Infeed width: 250 - 700 mm Roll forming speed: 9 m/min

with bending bolts Prism 80 mm Stop and die holder Foot switch, optional two-hand operation Pressure adjustment Colour: blue/beige Total power requirement: 5 kW Tool height: 200 mm Stroke 250 mm Pressure 40 t Dimensions: 1300 x 680 x 1110 mm Weight: 880 kg

Sheet thickness aluminium: 1.00 mm Due to the bevel cut, the X-Cut machine can not only cut straight strips in the longitudinal and transverse directions, the automated bevel cut opens up many new possibilities for cutting the different surfaces quickly and accurately. Saves up to 90% of the time Up to 60 degrees angle adjustment in both directions Intuitive operation thanks to touchscreen and calculation aids Thanks to optimized software, cutting trapezoidal surfaces, triangular surfaces and other surfaces for standing seam roofs and wall cladding is no problem Due to the fully automated bevel cutting and the versatility and accuracy of the software, a high level of time savings can be achieved during production in the company and also during installation on the construction site Automatic operation: Enter the desired length and the number of pieces to be cut automatically. Tota ...

Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-

Punching capacity: ø 18x14 mm, (diameter and thickness): ø 50x5 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate/min. (20 mm stroke): 41 Max. hole diameter: ø 160x2 Motor power: 3.7 kW Punching force: 35 ton Weight: 1200 kg

with 5 stations Punching diameter: 40 x 8/22x 15 mm Projection: 165 mm 1-cylinder machine with footswitch with lighting Stop: 1000 mm Projection: 165 mm Punching diameter: 40 x 8/22 x 15 mm Blade length: 300 mm Notching: 50 x 90 x 70 mm Total power requirement: 3.7 kW Colour: blue/beige Angle steel: 75 x 75 x 6 mm Flat steel: 300 x 10 mm Square steel: 25 x 25 mm Round steel: D 30 mm Punching pressure: 45 t Dimensions: 1050 x 760 x 1490 mm Weight :840 kg

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Key data: 8020 mm, 1 mm

with electric cutting device with 10 stand units with motor scissors New CNC control single program MAS with touch screen with rotary wheel Projection: approx. 100 mm Colour: green Total power requirement: 400 V Motor power: 5.5kW Upper beam stroke: 190 mm with electric roller shears Power: 8020 x 1.5 mm steel, 2.0 mm aluminum Dimensions: 9200 x 1400 mm Weight: approx. 3650 kg Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out.

Key data: 6400 mm, 1 mm

with the following equipment: Brand new JC100 controller Stop system type 20 conical 5 stop fingers standard Roller Shears SL 1.5 mm Material thickness adjustment type HM per stand dynamic positioning type DP Super High Speed Hydraulics (shs) LED lighting with signal function Safety according to BG Colour RAL 7016 anthracite grey/RAL 2004 light orange Total power requirement 16 A Insertion depth: 1250 mm Roller Shears SL 1.5 mm Number of stands: 6 pieces Opening width: 200 mm Bending angle 145 degrees Dimensions: 7800 x 1700 mm Weight: 5300 kg

Sheet metal splitting and cut-to-length line for processing sheet metal coil material Max. width: 1,250 mm Min. width: 250 mm Sheet thickness steel up to 400 N/mm²: 0.4 – 1.25 mm Sheet thickness stainless metals up to 550 N/mm²: 0.4 – 0.9 mm Sheet thickness aluminium and copper: 0.5 – 1.5 mm Min. sheet cutting width: 60 mm /15 mm from coil outer edge Max. cutting speed: 30 m/min adjustable Cutting accuracy: Class "m" DIN/ISO 2768 (± 0.8 mm/m) Current: 3PH 400-488V AC/n/PE-11kW/16A (300mA fuse) Compressed air: 25 l/min (short-term)-6 bar dry and filtered Dimensions: 1.6x2.5x1.3 m Weight: 1.5 t

with laser positioning aid at the punching station Hydraulic cylinders with fast return stroke Easy installation of special tools Projection also available in 310 mm including punch/punch search device Punching capacity: D 22 x 18, D 50 x 8 mm Max. stroke length: 100 mm Table size: 700 x 700 mm Projection: 510 mm Dimensions: 1520 x 820 x 1960 mm Weight: 1850 kg