sheet metal working used for sale (3,245)

Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm

Ref. -No.: 10371Manufacturer: LVDYear of construction: 2013Type of control: CNCControl: 31ilbStorage location: HalberstadtCountry of origin: BelgienStructural steel: 15 mmstainless steel: 8 mmaluminum: 6 mmLaser source: Co2 - 4KW Edit size: 6000 x 2000 mmchanging table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 HElectrical connection: IEC X-Axis: 6200 mmY-Axis: 2100 mmMax capacity: 4 kNMax. weight: 25055 KG DanPerformance: 75 kWMachine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information:Last maintenance incl. new PC in 04/2023

Ref. -No.: 10368Manufacturer: BYSTRONICYear of construction: 2011Type of control: CNCControl: Bystronic ByVisionStorage location: Halberstadt - GermanyCountry of origin: SchweizManufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 NmMaximum power: 6000 CwWorkspace X: 3048 mmWork area Y: 1524 mmStroke Z axis: 100 mmPositional deviation Pa: +/- 0.1 mm/mPosition spread Ps: +/- 0,05 mmPositioning in axis-parallel X and Y maximum: 120 m / minPositioning simultaneously X/Y maximum: 169 m / minAxis acceleration X/Y maximum: 30 m/s^2table load capacity: 890 kgtable change time: 25 s

sheet width: 0500 mmcoil outside dia.: 1400 mmweight max. in kg: 4000 kgplate thickness: 0,80 - 3,60 mmdiam. of the rolls ca.: 80 mmfeed rolls: 2 nomb. of straightening rolls: 7 exit pinch rolls: 2 speed: 5-30 m/minrange of expansion ca.: 445 - 530 mmexpansion: manuell total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mControl conversion to SIEMENS S7 in 2012- pneumatic pressure roller on the side- pneumatically ventilated feed roller- Straightening rollers manually adjustable- lateral belt guide at the inlet- Large roller basket at the outlet- Ultrasonic transmitter for loop control- Roller feed type 1125 D- Bandwidth max. 510 mm- Band thickness max. 6 mm with full width 5.50 mm- Roll diameter 125mm- Feed speed: max. 100 m/min.- pneumatically ventilated top roller- Lateral tape guide with digital display- Inlet roller basketThe data for this ad was ...

weight max.: 5 tworkpiece diameter: 300 - 2500 mmdrum diameter: 250 x 100 mmfeed: 100 - 1000 mm/mintotal power requirement: 0,75 kWweight: 0,6 tdimensions: 1,5 x 1,0 x 0,6 mcharacteristics• Self-aligning for multiple diameters• Infinitely variable speed of the drive unit• Polyurethane coating of the rollers• Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces• High stability due to the solid construction of the machine• CE certificate• Very good value for money• Remote control on the cable• Documentation in EnglishThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK Laser Cutting Machine STX3015 4kW TOP CONDITION – OVERHAULED IN 2023 Year of construction: 10/2015 very well preserved, overhauled MAZAK laser machine with 4000W Panel format: 3000mm x 1500mm minimum installation area of 2.9m x 7.3m Small parts conveyor belt LAN/USB connection automatic nozzle change automatic focus position adjustment Quick piercing into thick materials Plasma sensor for stainless steel cutting Piercing sensor for piercing Burning sensor for monitoring when cutting structural steel Completely encapsulated machine cover no foundation necessary FE: up to 22mm VA: up to 15mm ALMG: up to 10mm Plastic possible incl. software incl. warranty incl. suction incl. commissioning + training =optional with fully automatic loading and unloading=

Offer 23216 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg

Compressive force max.: 55 kN Projection: 175 mm Punching stroke adjustable: 0 - 28 mm Number of strokes at 15 mm stroke: 30 Adjustable notch stroke: 0 - 60 mm Hydraulic drive: 380 V, 3 kW Required space: 1170 x 620 x 1470 mm Weight: 930 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Seam closer Schechtel MS Manual Length 1 m

guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg

Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.

Bending bench Geka Max width 2.03 m Thickness 1 mm Scale 180° Bending beam spring-assisted Length 2.40 m Width 0.80 m Height 1.10 m Weight 500 kg

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Feed reel Manafacture: FAGOR Type: 100G

Hydraulic. guillotine shears, used, ready for demonstration hydraulic plate shearer, used , ready for operation Typ / type: 252.6000.4 Fabr./ make: Helmut Lotze Baujahr/ year: 1995 Lager-Nummer / Stock number: 0989 Blechstärke bei größte Blechbreite/ thickness at max. cutting length: 4 mm Schneidbreite/ cutting length: 6040 mm Weight: approx. 22 t Specification: Hinteranschlag / backstop Rollablage / Roller tray

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

-Exhibition Machine- State-of-the-art fully hydraulic folding machine. Extensive standard equipment: · hydraulic drive for upper and bending beam · Pointed rail 45 degrees · Rails in upper, lower and bending beam · Oil filling · Control panel with: Digital display of bending angle infinitely variable specification of the bending angle Push button for controlling the upper and bending beam Switch for automatic operation · Control: PLC - Siemens · Foot switch for manual and automatic operation · CE certification · Safety stop at approx. 25 mm upper beam height Hydraulic dynamic crowning Motorized backgauge (1000 mm) Electr./hydr. adjustment of the bending wing, Touch screen: Input for backgauge values and Bending angle of the folding machine Pressure regulation of the upper beam Automatic tool clamping Round bending function with bending Half-shells 180 ...

Fiber laser machine YAWEI HLF with TOP equipment Laser power: 8kW Sheet size: 3000 x 1500mm automatic shuttle table Siemens touchscreen control with LAN/USB Sheet layer measurement Siemens Drives Precitec Auto Focus Procutter Cutting Head with Autofocus IPG YLS resonator with 8kW The machine will include "everything" 2 years warranty CAD CAM Software Libellula CUT Commissioning Delivery within Germany and Operator/software training offered. We even provide on-site support for unloading + insertion. The machine is a new machine and available immediately. An identical one can be tested at any time under power with us. In our showroom we have various laser machines from our manufacturers under power and various materials to test. We would like to invite you to send us your drawings or drawings. Cut your material. We have been the exclusive trading house and servi ...

: 50 mm: 8,5 U/min: 100 kNroll diameter: 162 mmDrive: 1,5 kWweight: 450 kgrange L-W-H: 1100x800x1500 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22523 Specifications: - Pressure capacity at 10 bar 35 KN - Plunger stroke 12 mm - Projection 95 mm - Installation height approx. 134 mm - Table size approx. 230 x 190 mm - Air consumption per stroke 8.0 l - Air inlet 6 - 10 bar - Space requirement approx. W 520 x H 1450 x D 600 mm - Weight approx. 100 kg - with: - Foot switch - Pressure gauge + pressure regulator - 4 x punching tool

Technical data approx.: - Total load capacity driven + rotating unit 25000 kg - Payload per container device 12500 kg - Workpiece diameter approx. 500 - 4000 mm - Axle distance of the support rollers adjustable - Roll diameter 400 mm - Roll width 120 mm - infinitely adjustable rotational speed - Handheld remote control for re- and li. run - Drive 400 V - Space requirements Unit approx. W 3500 x H 850 x D 1000 mm - Platzb. with running unit approx. W 2700 x H 850 x D 800 mm - Weight applied Unit approx. 1300 kg - Weight with running unit approx. 900 kg

sheet width - max.: 0100 mmcoil weight: 0,150 tcoil internal dia.: 320 - 520 mmcoil outside - diam. ca.: 1200 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: m- manually adjustable brake- Rear handguard- Restriction ring in front- Movable on frameThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Qty. 1 Second-hand steel strip slitter Mfc.: Dai Hyun Built: 1994 Still in operation until end of July 2023 Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel Line Direction: Left to right Strip Width: 1400 mm Thickness: 0.8 - 6.0 mm Max. Coil weight: 24 MT Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm Coil Dia.: Ø 1000 & Ø 2000 mm Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm Slitting Speed: 50-100 m/min Edging width: 3 mm to 10 mm Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive Control Voltage: 110 VAC, 50 Hz, 1 Ph. Slitting capacity Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm. Strip thickness No. of cuts No. of strips Line speed mm m/min 1.0 - 1.9 16 15 70-90 2.0 - 2.9 14 13 70-80 3.0 – 4.0 12 11 60-70 4.1 – 5.0 7 6 60-70 ...

sheet width: 2000 mmplate thickness: 20 mmpre-bending: 15/11 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mwith initial roundingTechnische Daten:/ technical detailsBiegelänge / bending lenght 2000 mmmax. Blechstärke / max. sheet thickness 20 mmAnbiegeleistung / initial rounding 15/11 mmWalzendurchmesser Unterwalzen / roll diameter below rolls 280 mmOberwalzendurchmesser / diameter of the upper roll 300 mmAntriebsleistung Hauptantrieb / drive capacity main drive 16,2 kWAntriebsleistung Anstellantrieb Oberwalze / drive capacity upper roll 4,8 kWAntriebsleistung Anstellsntrien Unterwalze / drive capacity below roll 3,7 kWGewicht ca. / weight ca. 14200 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are n ...