We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (4)
- 3-Roller Round Bending Machines (8)
- Axis Laser Processing Equipment (5)
- Beading Machines (10)
- Bending And Straightening Machines (1)
- Bending Machines (39)
- Bending Tools (46)
- Blanking Presses For Profiled Materials (1)
- Blanking Presses For Sheet Metal (1)
- Circular Shears (9)
- CNC Bending Machines (10)
- CNC Hydraulic Plate Shear (22)
- CNC Laser Cutting Machines (136)
- CNC Plasma Cutting Machines (30)
- CNC Pressbrakes (128)
- CNC Punching Machines (25)
- CNC Punching Nibbling Machines (5)
- CO2 Laser Marker (5)
- Combination Machines (1)
- Combined Punching, Nibbling, Forming And Beam Cutting Machines (7)
- Concrete Bar Bending Machines (1)
- Container Rotating Devices (16)
- Coper-Notcher With Punch For Profiled Materials (1)
- Coper-Notcher With Punch For Sheet Metal (1)
- Cutting off machines (1)
- Cutting-To-Length Lines (15)
- Deburring Machines (7)
- Decoilers (40)
- Feed Straighteners (3)
- Flame Cutting Units (5)
- Flanging Machines (5)
- Flat, Bar And Section Shears (5)
- Folding Machines (137)
- Guillotine Shears (95)
- Hand Lever Shears (7)
- Hand Plate Shear (1)
- Hole Punches (38)
- Hydraulic Shear (119)
- Ingot, Billet And Slab Shears (1)
- Laser And Plasma Cutting Centres (1)
- Laser Cutting Machines (64)
- Laser engraving machines (11)
- Laser gas cutting installations (3)
- Laser Machines (10)
- Longitudinal Cutting Lines (15)
- Longitudinal cutting machines (1)
- Mandrel Bending Machines (5)
- Mandrel Pipe Bending Machines (12)
- Metal spinning machines (5)
- Motorized Beading Machines (13)
- Motorized Plate Bending Machines (18)
- Motorized Shears (16)
- Nibbling Machines (7)
- Notching Machines (50)
- Other Combined Sheet Metal Working Machines (3)
- Other Metal Forming Machines (4)
- Other Sheet Metal Working Shears (3)
- Other Wire Working Machines (1)
- Pipe Bending Machines (4)
- Pipe Drawing Machines (1)
- Pipe Manufacturing Machines (7)
- Plasma Cutters (11)
- Plasma Cutting Machines (26)
- Plate And Section Shears (4)
- Plate Edge Pre-Bending Machines (3)
- Profile Bending Machines (35)
- Profile Steel Cutters (52)
- Profiling Machines (11)
- Profiling Systems (7)
- Punches (4)
- Punching Machines (47)
- Recoilers (5)
- Reel Straightening Units (2)
- Reels (6)
- Ring Bending Machines (7)
- Roll Bending Machines (11)
- Round Bending Machines (49)
- Section round bending machines (2)
- Shears For Profiled Materials (2)
- Shears For Sheet Metal Working (8)
- Sheet Metal Bending Machines (25)
- Sheet metal blowroom machines (21)
- Sheet Metal Clamp (1)
- Sheet metal cutting machines (3)
- Sheet Metal Deburring Machines (14)
- Sheet Metal Die (2)
- Sheet Metal Machining Centres (15)
- Sheet Metal Punching, Nibbling And Forming Machines (7)
- Sheet Metal Shears (13)
- Sheet Metal Straightening Machine (3)
- Sheet Notching Machines (3)
- Sheet Strip Feed Leveler (1)
- Smooth planer (2)
- Special Purpose Machines Built Up From Units For Metal Cutting Operations (1)
- Special Purpose Sheet Metal Forming Machines (1)
- Special Purpose Sheet Metal Working Shears (1)
- Straighteners (11)
- Tape Straightening Machines (13)
- Three-roll plate bending machines (11)
- Trimming Machines (1)
- Tube Bending Machines (44)
- Universal CNC Bending Machines (4)
- Universal Lockforming (1)
- Volume bending machines (2)
- Water Jet Cutting Machines (22)
- Wire And Strip Working Machines (3)
- more
- A+B (1)
- A+B ERBEND (2)
- A+B FASTECH (1)
- ABBEY (1)
- ABWICKELHASPEL (1)
- ACCURL (1)
- ACD (1)
- ACF (2)
- ACHENBACH (1)
- ADIGE (2)
- ADIGE BLM (1)
- ADIRA (3)
- AGIE CHARMILLES (1)
- AGOTHA WMW (1)
- AGTOS (1)
- AIR LIQUIDE (1)
- AJAN (2)
- AK BEND (22)
- AK-BEND (29)
- AKYAPAK (6)
- ALBA (1)
- ALFRA (1)
- ALMI (3)
- ALMORE (1)
- ALU (1)
- AMADA (47)
- AMADA PROMECAM (7)
- AMADA-PROMECAM (1)
- AMADA/LKI (1)
- AMF Spanntechnik (2)
- AMG (1)
- AMGA (1)
- AMOB (1)
- AMT (1)
- Apfel (14)
- APOLLO (1)
- aps (3)
- ARKU (10)
- ARLO (1)
- ARYMA (1)
- ASSERVIMENTI (1)
- ATLANTIC (14)
- ATS (4)
- AUTOMATIC (1)
- AWEA (1)
- AXIAL (1)
- AYEL-TECH (1)
- B+S GROUP (1)
- Bach (2)
- BALLIU (2)
- BAUBLYS (1)
- BAYKAL (23)
- BAZHOU (1)
- BBM (1)
- BEIJING YC DIGITTECH (1)
- BEIL (1)
- BELGIUS (2)
- BEMA (1)
- BENDMAK (2)
- BERNADO (1)
- Bernardo (22)
- BERNARDO, PWA HANDELS GES (1)
- BETONSTAHLBIEGER (1)
- BETSCHKE WEGERHOFF (1)
- Beyeler (9)
- Biegemaster (9)
- BIELOMATIK (1)
- BIELSA (1)
- Bihler (2)
- BLEMAS (3)
- BLM (4)
- BLM Adige (4)
- BLM-ADIGE (1)
- BODOR (4)
- BOLDRINI (1)
- BOLLINA (1)
- BOMBLED (1)
- BORER-HAENGGI (1)
- BOSCHERT (19)
- BOSCHERT GIZELIS (1)
- BPR Curvatrici (2)
- Braun (3)
- BRAUN HIMMEL (1)
- BRAUN MAIER (1)
- BRG (1)
- BRONSWERK (2)
- BUCK (1)
- BUD-MASZ (2)
- BURNET (4)
- BWM (3)
- BWRM (2)
- BÜLTMANN (1)
- Bystronic (72)
- BYSTRONIC BEYELER (1)
- BöLLHOFF (1)
- CAMU (1)
- CEVISA (2)
- cewe (7)
- CHAPPUIS (1)
- CHESTERMAN (1)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
subcategories
(3rd category level)
CNC Pressbrakes 128
Decoilers 40
Folding Machines 137
Hole Punches 38
Hydraulic Shear 119
Punches 4
Reels 6
more 1627
Manufacturer:
(Category: 107)
A+B 1
ABBEY 1
ACCURL 1
ACD 1
ACF 2
ADIGE 2
ADIRA 3
AGTOS 1
AJAN 2
AK BEND 22
AK-BEND 29
AKYAPAK 6
ALBA 1
ALFRA 1
ALMI 3
ALMORE 1
ALU 1
AMADA 47
AMG 1
AMGA 1
AMOB 1
AMT 1
Apfel 14
APOLLO 1
aps 3
ARKU 10
ARLO 1
ARYMA 1
ATLANTIC 14
ATS 4
AWEA 1
AXIAL 1
Bach 2
BALLIU 2
BAUBLYS 1
BAYKAL 23
BAZHOU 1
BBM 1
BEIL 1
BELGIUS 2
BEMA 1
BENDMAK 2
BERNADO 1
Bernardo 22
Beyeler 9
BIELSA 1
Bihler 2
BLEMAS 3
BLM 4
BODOR 4
BOLDRINI 1
BOLLINA 1
BOMBLED 1
BOSCHERT 19
Braun 3
BRG 1
BUCK 1
BUD-MASZ 2
BURNET 4
BWM 3
BWRM 2
BÜLTMANN 1
Bystronic 72
BöLLHOFF 1
CAMU 1
CEVISA 2
cewe 7
CHAPPUIS 1
CHIESA 2
CHINA 1
CHIRON 1
CIDAN 4
CMS 2
CMU 2
CoastOne 12
COIL-TEC 1
COLGAR 3
COLLY 1
COMAC 1
COMACA 2
COMESSA 1
CORMAK 1
CORNO 1
CRIPPA 1
CSM 1
DAI HYUN 1
DAKO 1
DALMEC 1
DANOBAT 1
DARLEY 14
DATE 1
DAVI 5
DAVY 1
DENER 1
DERATECH 1
DESTACO 2
DIGEB 1
DIGEP 2
DIMECO 3
DMF 1
DMG 3
DOLAST 1
DONEWELL 2
DREHER 7
DRINNS 1
DUMETA 16
DURMA 67
DYNOBEND 2
EAGE 1
EAGLE 4
EBU 1
ECKERT 13
ECKOLD 40
Eclair 2
EDEL 12
EHRT 1
EHT 20
EIGENBAU 2
EIGL 1
ELMEA 1
ELUMATEC 1
EMMEGI 1
EPILOG 1
EPPLE 1
ERBEND 3
ERCOLINA 16
ERMAK 50
Ermaksan 4
ERNST 2
ESAB 9
ESPE 1
Euromac 8
EVERS 1
FACCIN 12
FAGOR 1
FALKEN 14
Farina 2
Fasti 56
FEMAS 1
FERMAT 1
FEYSAMA 1
FIBRO 2
FICEP 2
FIMI 2
FINN POWER 17
Finn-Power 10
FINTEK 10
FISCHER 5
FJELLMAN 1
FLADDER 1
Flow 5
FOBA 2
FOMP 1
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 40 mm-Load capacity: 3200 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg/piece
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 25 to 75 mm-Load capacity: 2500 kg-Number: 1x terminals available-Price: per piece-Weight: 21 kg
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws: with plastic insert-Span width: 0 to 10 mm-Load capacity: 500 kg-Number: 2x terminals available-Price: per piece-Weight: 6 kg/piece
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, deer foot tool, deer foot tool for press brake-Tool for: press brake-Dimensions: 3000/30/H116 mm-Weight: 48 kg
approved
dealer
dealer
Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine-Tool for: press brake-Support for: press brake tool-see drawing: at the photos-Number: 2x documents available-Price: per piece-Dimensions: 3600/110/H32 mm-Weight: 76 kg
approved
dealer
dealer
Christoph Busch GmbH
: Hebefix A10 weight max.: 10 tmachine weight ab.: 49 kg (2 Stück) kg: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
plate thickness: 4 mmroll diameter: 125 mmthroat: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,6 x 0,6 x 1,2 mm• 5 speeds• With foot control• With brake motor• With emergency stop• With hydraulic roller adjustment• With 4 roller setsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 160-254 mm-Load capacity: 4000 kg-Number: 1x terminals available-Price: per piece-Weight: 11 kg
approved
dealer
dealer
Replacement knife for table shears, replacement blades, cutting knives, shear knives-Dimensions: 79 x 19 mm-Lengths: 2x 1055 mm-Hole spacing: 50/238 mm-Bore: 17 mm countersunk-Price: complete-Weight: 24 kg
approved
dealer
dealer
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 30 mm-Load capacity: 2500 kg-Number: 1x terminals available-Price: per piece-Weight: 15 kg
approved
dealer
dealer
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 40 mm-Load capacity: 3500 kg-Number: 1x terminals available-Weight: 30 kg
approved
dealer
dealer
sheet width: 1070 mmplate thickness: 2,0 mmdistance between columns: 1100 mmdiameter of upper rolls: 76 mmtotal power requirement: Handbetrieben weight of the machine ca.: 0,22 tdimensions of the machine ca.: 1,8 x 0,8 x 1,3 mmSheet bending machine with:- Capacity 1050 x 2 mm- High strength wrought iron rollers with SAE 1050 certificate.- Footswitch- conical bending- Swiveling top roller- Safety device emergency leash- Documentation- 400 volts- CE certificateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool: for press brake-Tool angle: 90°-Dimension: 37 x 255 mm-Dimensions: see the drawing in the photos-Length: 100mm-Weight: 4.9 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool-Tool for: press brake-Prisms: 90° 12 mm-Drawing: in the photos-Length: 4200 mm (2 x 2100 mm)-Dimension: 20 x 75 mm-Weight: 44 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool-Tool: for press brake-Prism groove: 7/10 mm-Square: 66 x 26 mm-Length: 2505 mm-Weight: 24 kg
approved
dealer
dealer
: für Draht hydraulically tiltable: ja : 2 t Year: unbekannt : Hydraulik Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool for: closing folds-Recording: 25 mm-Drawing: in the photos-Dimension: 40 x 130 mm-Length: 495 mm-Weight: 12.5 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool: 26°-Drawing: in the photos-Dimension: 13 x 180 mm-Length: 45 mm-Weight: 0.7 kg
approved
dealer
dealer
Bending tool, die, lower knife, lower tool, prism tool-Tool for: press brake-Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm-Length: 3 x 835 mm, 1 x 272 mm-Width/height: 60 mm-Drawing: with the pictures-Weight: 67.5 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool as: die-Thickness: 25/13 mm-Drawing: with the pictures-Total length: 400 mm-Total height: 108 mm-Weight: 6.5 kg
approved
dealer
dealer
Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch, pneumatic press -Support frame: for press or punching tools -Upper part: adjustable stroke approx. 60 mm (without press cylinder) -Lower part: with ejection pneumatic cylinder stroke 30 mm -Projection: 220 mm -Dimensions: 500/440//H890 mm -Weight: 92 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool as: die-Thickness: 25/13 mm-Drawing: with the pictures-Total length: 400 mm-Total height: 120 mm-Price: per piece-Number: 2 pieces-Weight: 13 kg
approved
dealer
dealer
Bending tool, die, upper knife, upper tool, straight tool-Tool for: press brake-Tool as: die-Thickness: 25/13 mm-Drawing: with the pictures-Total length: 400 mm-Total height: 99 mm-Price: per piece-Number: 2 pieces-Weight: 9.7 kg
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 10 to 27 mm-Load capacity: 2,500 kg-Number: 1x terminals available-Price: per piece-Weight: 14 kg/piece
approved
dealer
dealer
Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 32 mm-Load capacity: 3000 kg-Number: 1x terminals available-Price: per piece-Weight: 14 kg/piece
approved
dealer
dealer
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper-Sheet metal claws-Span width: 0 to 50 mm-Load capacity: 6000 kg-Number: 1x terminals available-Price: per piece-Weight: 24 kg/piece
approved
dealer
dealer
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Handover: in the current condition as seen-Die cuts: as shown in the pictures-Manufacturer: SUPRA, type PA8150 with base plate-Punching tool: Ø 4 mm-Dimensions: 275/200/H180 mm-Weight: 21.4 kg
approved
dealer
dealer
Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Profile diameter: 50 mm -Radius: approx. 220 mm -Dimensions: 490/305/H60 mm -Weight: 27 kg
approved
dealer
dealer
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame-Handover: in the current condition as seen-Punching frame: as shown in the pictures-Manufacturer: CEWE-Type: PW8-150-Projection: 150 mm-Dimensions: 310/100/H215 mm-Weight: 9.1 kg
