sheet metal working used for sale (3,290)

Key data: 4000 mm

Ref.Nr. 00883 Name of the system: Used guillotine shears Manufacturer I.MA. L Model CESO1A Speed 64 Year of construction 2003 Working range 4m Dimensions 3700 x 1950 x 2100 mm Weight 8500 kg Press safety test according to BGR 500 lt test report. Next exam in January 2026

Press brake tool, bending tool, die, upper knife, upper tool, straight tool -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

Key data: 100 t, 215 mm, 3100 mm

Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional

Key data: 4020 mm, 1 mm

with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01

weight of the machine ca.: 16 tsheet width: 3150 mmsheet thickness - max.: 16 mmsheet width - min.: 1,6 mmvoltage: 400 Vrange - high tensile: 3950x2475x2520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg

x-travel: 6000 mmy-travel: 630 mmz-travel: NC-Schwenkkopf mmControl: total power requirement: -- kWweight of the machine ca.: 19,5 trequired space: -- mCondition: UsedSpecification: Vertical CNC machining center Chiron MILL 6000 high speed with NC swivel head Year of manufacture 2004, completely overhauled in 2013 by the manufacturer Chiron- Siemens 840D (PCU50, NCU572.4)- NC swivel head- Long part machining up to max.: 6,000 mm- Machining of the front side, horizontal with swivel head right/left- Pendulum machining via center partition wall max.: 1,773 mm- 4 hydraulic double vices- High-speed package: - Motor spindle D 12,000 rpm, 140 Nm - Travel distance X: 6,000 mm / Y: 630 mm - Rapid traverse in X/Y/Z: 60 m/min- Production package: - Crown belt conveyor, ejection height 1,050 mm - IKZ preparation - KNOLL VRF250  ...

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Key data: 3100 mm, 6 mm

Hinged backgauge, manual cutting gap adjustment, lighting, cutting length adjustment, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 6.0 mm Sheet thickness front: 4.0 mm Colour: grey/blue Total power requirement: 11 kW Machine weight: 900 kg Dimensions: 4000 x 2150 x 1640 mm Cutting gap adjustment: 0.05 -0.80 mm Hold-down: 14 Stroke rates per minute approx.: 19 stroke/min Cutting Angle: 1.2 Adjustable back gauge Back gauge: 1000 mm Machine number: SN20080583

Key data: 3190 mm, 6 mm

Note: Machine is currently still being revised, the illustrations were made before the Revision. Sheet width: 3190 mm Sheet thickness steel: 6.3 mm Colour: grey Total power requirement: 18.5 kW Machine weight: 6800 kg Dimensions: 3830 x 3820 mm with cutting gap adjustment Stroke rates per minute: 30 - 50 strokes/min Angle stop: 1500 mm Throat: 5 - 1000 (1500) mm

sheet width: 3060 mmplate thickness: 6 mmno. of strokes: 20 Hub/minstroke: 750 mmMotor Capacity: 11 kWoil volume: 160 lweight of the machine ca.: 5.500 kgdimensions: 3860 x 2560 x 1560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motorized backgauge with digital display Manual cutting gap adjustment Cutting length variably adjustable Cut edge lighting New knives

Punching force: 400 kN (holes e.g. 20 m in 15 mm steel) Cuts 150 x 10 mm on the flat steel shear With pipe notch on the steel bar shears Foot switch for stroke release Support table on the punching side Quick-change device Range of tools is included in the price

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Range of tools is included in the price Weight: 3,000 kg

Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg

Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness  ...

Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request

tube diameter: 40-168 mmwall strength: . mmbending radius min.: ohne Rohr 190 mmElectrohydraulic: : mit electro motor: 30 kWvoltage: 380 Voperating pressure: 200 barDouble control pump: je. 46 l/mPump control: 4/3 Wege Ventile Pump pressure medium: Hydrauliköl der HLP 300 ltr.: Hydraulikzyl. Rollenkette E-Control: Tastatur, Steuerung SPS total power requirement: kWweight of the machine ca.: 22 tdimensions of the machine ca.: 30 m2 mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ...

sheet width: . mmplate thickness: 10 Festigkeitvon N/mm²400 mmdistance between columns: . mmstroke: 300 mmbending angle max.: 130 °0: 3000 mmpointed rail: 45 Grad: auswechselbar Control panel: Digitalanzeige, Tastatur inside radius min.: 3 x Blechdicke mmShortest leg length: 10 x Blechdicke mmdrive: hydraulisch total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible b ...

Key data: 4040 mm, 4 mm

Max. cutting length: 4040 mm Max. sheet thickness: 4 mm steel Motorized adjustable backgauge with digital display up to 1000 mm Pneumatic sheet hold-up Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 7500 kg

sheet width: 3100 mmplate thickness: 6,0 mmdistance between columns: 3.100 mmdown holder: 14 Stückno. of strokes: 16 - 24 Hub/minoil volume: 150 ltr.cutting angle: 0,5 - 1,5 °thickness at Niro-steel: 4,0 mmcolumn arm: 350 mmengine output: 11,0 kWweight of the machine ca.: 7.060 kgrange L-W-H: 4,1 x 2,2 x 2,19 m-------------------------------------------------- electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment-------------------------------------------------- Furnishing:- CNC guillotine guillotine shears- with electr. / hydr. Cutting gap and cutting angle adjustment- CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting l ...

pressure: 320 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 140 mm/secwork speed: 10.5 mm/secreturn speed: 150 mm/secwork stroke: 375 mmdayligth: 650 mmtable height: 900 mmtable width: 220 mmoil volume: 400 ltr.voltage: 400 Volttotal power requirement: 30.0 kWweight: 22064 kgDimensions (HxWxD): 5350 x 2450 x 3150 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, Sys ...

Description Guillotine Shears Hera HSS-5 Details Machine no. 511 Year of construction 1982 Cutting capacity 10 mm to 2m width with spare blade

plate width: 1650 mmplate thickness: 3 mmstraightening roll diameter: 45 mmsupport rollers: 140 Stk: 17 Stk: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Plain text display Compression Force Monitoring Wire straightener Bosch Stripping Devices Bracket and brush motor with mounted tool W32/1-32 Soundproof booth Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as shown in the pictures. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

A punch riveting tool Böllhoff is available. Documentation available. An on-site inspection is possible.

A sheet metal guillotine shear and a press brake Wieger are available. 1) Guillotine shear Wieger ESW 5/25, year of manufacture: 1960, max. cutting capacity: 5mm, working width: 2000mm. 2) Press brake Wieger AW 50, press force: 50t, working width: 2500mm. An on-site inspection is possible.

press capacity: 400/40 kNStroke length: 285 mmworking feed: 10 mm/secreturn speed: 20 mm/secTable dimensions: 660x1250 mmWorking height: 930 mmtoolpiece height max.: 660x1250 mmtotal power requirement: 4 kWBending capacity: 200x26 mmbending capacity max. - round: 60x4,0 mmWeight: 1050 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3050 mmtable width: 1525 mmburner heads: 1 Control: Mazatrol PreviewG workpiece weight: 930 kgtraversing speed: 120 m/minlaser capacity in Watt: 6 kWcutting width: bis 25 mmx-travel: 3110 mmy-travel: 1595 mmz-travel: 110 mmweight: 15200 kgtotal power requirement: 41 kWdimensions of the machine ca.: mmNEW and UNUSED MachineLaser cutting machine with automatic shuttle table- Mazatrol PreviewG CNC control- 2 pallets- Multicontrol cutting head (Optiflex)- Donaldson DFPRE-4L SPKTRP (7,5kW) extraction system- CEThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired