sheet metal working used for sale (3,267)

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions Knife sharpened 1700 kg

An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible.

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

Trumpf Servo Amplifier New Part

Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

This 3-axis TRUMPF TruLaser 5030 was manufactured in 2012. It features a powerful 6,000 W laser and is equipped with a HANDTE MF-L 2000 extraction system. The machine has been completely freshly serviced and has a total of 20,118 laser hours. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 5030 CO2 laser cutting machine we have for sale. Contact us for further details.

plate thickness: 4 mmroll diameter: 125 mmthroat: 200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,48 tdimensions of the machine ca.: 1,6 x 0,6 x 1,2 mmExhibition machine, unused.• 5 speeds• Foot control• Brake motor• Emergency stop• Hydraulic roller adjustment• Special tool setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.No. 00909 Name of the plant: Strip steel straightening line Manufacturer: Werner Müller Stanz Umformtechnik Type BRMU- 065 – 01 – 05 With CE mark Year of construction 2010 Machine hours 3500 h Belt width max 120mm Material thickness max 5mm Material thickness min (steel) 0.7mm Speed Max 30m/min Motor power 2.4 kW Straightening roller diameter 65mm Feed roller diameter 97.5mm Feed speed +- 1mm Technical condition Ok Submission date Immediately

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

Key data: 1020 mm

used, small table bending machine incl. frame, clamping is done via crank, bending beam 10mm, machine in its existing state, without function control, i.e. the machine is not overtaken by us Working length: 1020 mm Sheet thickness steel: 0.7 mm Color/: Green Dimensions: 1400 x 500 x 1200 mm Machine weight: 150 kg Opening width: 85 mm Bending Angle (Max): 105 degrees

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

This 3-axis TRUMPF Trumatic L 3050 was manufactured in 2006. It features a powerful 6,000 W CO₂ laser and a generous working area of 3,000 × 1,500 mm. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L 3050 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF TruLaser 3030 was manufactured in 2007. It features a powerful 4,000 W CO₂ laser and a working format of 3,000 × 1,500 mm, making it suitable for various cutting applications. With a connected load of 88 kVA, this machine is designed for efficiency and reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic 600L was manufactured in 1996. It features a maximum punching force of 220 kN and a laser power of 1,500 W, making it suitable for various applications. With a machine weight of 18,000 kg, it offers robust performance. If you are looking to get high-quality punching and laser capabilities, consider the TRUMPF Trumatic 600L punch-laser combination we have for sale. Contact us for further details.

This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details.

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

used Coil-Tec Mounted Cross Shear 1000 x 1.0 with hold-down and dispenser, mobile, with connecting tabs to the workbench "Modular" Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey Dimensions: 1320 x 1500 mm Coil weight: 250 kg

Key data: 3000 mm, 10 mm

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Key data: 3200 mm, 6 mm

Hydraulic swivel bending machine, hydraulic dynamic crowning, touch screen, pressure regulation of the upper beam, mot. Back gauge (1000mm), electr./hydr. Adjustment of the bending beam

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

Plasma cutting machine manufactured in 2021. This Hypertherm HPR170 machine features a sturdy construction capable of handling up to 100 mm material thickness and high-quality linear guides for precision. With digital, maintenance-free AC servos, it offers impressive speeds of up to 40,000 mm/min. Consider the opportunity to buy this Hypertherm HPR170 plasma cutting machine. Contact us for further details.

This ESAB Suprarex HD 4000 plasma cutting machine was manufactured in 2021. It features a track width of 4000 mm and a track length of 12000 mm, supporting a maximum working length of 9000 mm. The machine is equipped for both oxyfuel and plasma cutting, handling material thicknesses up to 200 mm. If you are looking to get high-quality cutting capabilities, consider the ESAB Suprarex HD 4000 machine we have for sale. Contact us for more information.

This 5s TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine.

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.