presses used for sale (1,636)

pressure: 1,5 kNstroke: 40 mmthroat: 70 mmWorking height from to: 75 - 170 mmtable surface area: 115 x 70 mmweight of the machine ca.: 11 Kgdimensions: 115 x 175 x 290 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 17,0 kNstroke: 40 mmthroat: 110 mmWorking height from to: 70 - 220 mmtable surface area: 190 x 140 mmspindle diameter: 30 mmweight of the machine ca.: 60 Kgdimensions: 310 x 190 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 650 tpassage width: 920 mmstroke: 1750 mmTable area: 2000x1500 mmram surface: 2000x1500 mmdayligth: 2100 mmlight-barrier: hydraulic: 203 barclosing speed: 500 mm/secpressing speed: 0,5-10,4 mm/sechole in plunger diameter/depth: mmopening speed: 250 mm/250ejector: return capacity: 150 ttotal power requirement: 75 kWweight of the machine ca.: 47 tdimensions of the machine ca.: 4,4x2,5x7,5 mmax pressure 250 bar 800 t impact shock dampening dissolution rate from 0.5 to 66.4 mm / secThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tpassage width: 1000 mmstroke: . mmwidth: 800 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

press capacity: 250 tspindle diameter: 160 mmram stroke range: 180 mmstroke speed: 71 Hub/mincolumn daylight: 450 mmtable surface area: 560x450 mmram surface: 450x400 mmtotal power requirement: 12 kWweight of the machine ca.: 9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tstroke: 300 mmCylinder: 205 MMdistance between table / ram: 520 mmtable surface area: 1100X350 mmram surface: 350X350 mmtotal power requirement: 7,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tno. of strokes: 30-70 Hub/minMax ram stroke: 130 mmram adjustment: 100 mmtable surface area: 950x630 mmram surface: 630x600 mmthroat: 340 mmdayligth: 480 mmcoil: GSW total power requirement: kWweight of the machine ca.: 8,9 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: manuell tdistance between columns: 50 mmdayligth: 50 mmtotal power requirement: kWweight of the machine ca.: 0,01 tdimensions of the machine ca.: 0,3 x 0,3 x 0,3 m• 4 units available,• bore at bottom, Ø 10 mm,• thread in spindle M 6,The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3000 mmdistance between columns: 2560 mmdayligth: 450 mmthroat: 450 mmadjustment of stroke: 240 mmhorn length over column outer edge each: 175 mmtable length: 3050 mmtable width: 280 mmtable height over floor: 820 mmelectrics - voltage/frequency: 220/50 V/Hzcontrol: CYBELEC, DNC60 stroke: 250 mmoperating pressure: 150 bartotal power requirement: kWweight of the machine ca.: 15 tdimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m• hydraulical press brake, • new control CYBELEC DNC60 (in 2005),• lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support,• prism and upper part of the machine in 3000 mm lengthThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 650 tpassage width: 920 mmstroke: 1500 mmTable area: 2000x1500 mmram surface: 2000x1500 mmdayligth: 2100 mmlight-barrier: hydraulic: 250 barclosing speed: 500 mm/secpressing speed: 0,5-10,4 mm/sechole in plunger diameter/depth: mmopening speed: 250 mm/250ejector: total power requirement: kWweight of the machine ca.: 47 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tthroat: 800 mmstroke: 630 mmdistance between table / ram: max. 1000 mmram head dimension: 710 x 600 mmtable-size: 800 x 1200 mmwork height max.: 1015 mmquantity of oil: 1100 lNumber of working hours: 7663 hweight of the machine ca.: 15 tdimensions: ca. 1600 x 2200 x 4800 mmdimensions of switch cabinet: ca. 1200 x 400 x 1800 mmTested for function. During the test run it is noticed that the press ramnot 100% leak-proof.In addition, the cable for manual operation was mended several times.Upper cover is missing, since this was dismantled by the customer due to crane use.Operating instructions and electrical plans available.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 tdistance between columns: 0 mmstroke: 160 mmtable surface area: 630 x 500 mmdayligth: 400 mmtotal power requirement: kWweight of the machine ca.: 5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

closing pressure: 4360 kNtable-size: 730 x 730 mmcontrol: B+R Industrieelektronik draw back pressure: 190 kNajustment speed: max. 60 mm/secreturn speed: max. 90 mm/secdaylight between the columns: 900 mm= vulcanizing press with vertical closing unit, with form removal and form separation deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeu ...

pressure:125 tpassage width:1000 mmstroke:500 mmWeight of machine approx.:6 tdimensions:2540 x 933 x 3000 mmreturn capacity:12 tMax Working height:700 mmReturn Speed:25 mm/secpestle plate:600 x 1300 mmtable plate:600 x 1300 mmtable height over floor:850 mmOil cooling (electric):1,5 kW (max)Engine Output:11 kWspeed of forward flow:10 mm/secpressure speed:10 mm/secOil Tank Capacity:250 lspeed rapid traverse:10 mm/seccolumn diameter:120 mm

pressure:125 tpassage width:1000 mmstroke:500 mmWeight of machine approx.:6,4 tdimensions:2540 x 933 x 2900 mmreturn capacity:12 tMax Working height:700 mmReturn Speed:25 mm/secpestle plate:600 x 1300 mmtable plate:600 x 1300 mmtable height over floor:850 mmOil cooling (electric):1,5 kW (max)Engine Output:11 kWspeed of forward flow:10 mm/secpressure speed:10 mm/secOil Tank Capacity:250 lspeed rapid traverse:10 mm/seccolumn diameter:120 mm

pressure:40 tpassage width:1000 mmstroke:400 mmWeight of machine approx.:3,5 tdimensions:2065 x 700 x 2905 mmreturn capacity:4 tMax Working height:700 mmReturn Speed:25 mm/secpestle plate:1320 x 600 mmtable plate:1320 x 600 mmtable height over floor:750 mmOil cooling (electric):1,5 kW (max)Engine Output:8 kWspeed of forward flow:10 mm/secpressure speed:10 mm/secOil Tank Capacity:200 lspeed rapid traverse:10 mm/seccolumn diameter:100 mm:2400 ?Maintenance Balcony:3600 ?:4600 ?Ground tub of lacquered steel:850

pressure:300 tdistance between columns:1900 mmstroke:600 mmtotal power requirement:30 kWweight of the machine ca.:27 tdimensions of the machine ca.:2900 x 3500 x 5400 mmReturn Capacity:40 tMain Cylinder:Ø 370 x 350 mm:2 Stk. Ø 80 x 50 mmspeed of forward flow:150 mm/secReturn Speed:150 mm/secTable size:1800 x 1800 x 150 mmRam plate:1800 x 1800 mmdemand for oil:ca. 700 l:max. 900 secDaylight Opening:900 mmpressure speed:15-8 mm/secauxiliary motor:5,5 + 2,2 kwauxiliary pump:22 + 5,5 ccLineal mess stab NOVOTECHNIK:650 mmTable height above ground level (approx.):1000 mmLight sensors front and rear of SICK:900 + 150 mmMonitor:12 ZollHydraulic and mechanical protection of the plungerTwo-piece auxiliary motors with 2.2 kwTwo-piece auxiliary pumps with a power of 6 L/min.Concurrency monitoring (0.5 mm/m²)Fast forward speed adjustable via plcMaximum deflection of the table at 0, 07mm/m²

pressure:400 tdistance between columns:2300 mmstroke:600 mmtotal power requirement:37 kWweight of the machine ca.:25 tdimensions of the machine ca.:3300 x 2800 x 5200 mmMain Cylinder:Ø 440 mm:2 Stk. Ø 100 x 60 mmspeed of forward flow:200 mm/secReturn Speed:200 mm/secTable size:2200 x 1400 x 150 mmRam plate:2200 x 1400 mmdemand for oil:ca. 900 l:max. 600 secDaylight Opening:900 mmpressure speed:15-8 mm/secauxiliary motor:5,5 + 2,2 kwauxiliary pump:22 + 5,5 ccLineal mess stab NOVOTECHNIK:650 mmTable height above ground level (approx.):1000 mmLight sensors front and rear of SICK:900 + 150 mmMonitor:12 ZollHydraulic and mechanical protection of the plungerTwo-piece auxiliary motors with 2.2 kwTwo-piece auxiliary pumps with a power of 6 L/min.Concurrency monitoring (0.5 mm/m²)Fast forward speed adjustable via plcMaximum deflection of the table at 0, 07mm/m²

pressure:500 tpassage width:1100 mmstroke:600 mmControll:Zweihandbedienung cylinder:1 Stückmotor:37 kwwork height max.:900 mmTable dimensions:1000 x 1000 mmtable height over floor:900 mmpestle plate:1000 x 1000 mmMain cylinder:Ø 500 mmAuxiliary cylinder:2x Ø 120x70 mmDaylight Opening:900 mm:150 Lt./min.Approach Speed:150 mm/secPressure Speed:15-3 mm/secReturn Speed:150 mm/secHeating collectors:max 250 °CLight sensors sick:900 + 150 mmMonitor:12" SIEMENS ZollRuler measuring rod for setting the stroke length:NOVOTECHNIK

pressure:100 tdistance between columns:3000 x 1500 mmstroke:500 mmtotal power requirement:30 kWweight of the machine ca.:16 tdimensions of the machine ca.:4000 x 2500 x 4500 mMaster cylinder:1 Stückmain cylinder:135 x 90 Ø mmAuxiliary cylinder:2 StückAuxiliary cylinder:90 x 50 Ø mmTable size:3000 x 1500 (mit T-Nuten) mmRam plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mmwork height max.:900 mmpre-running speed:125 mm/secreturn speed:100 mm/secSpeed printing phase:40 - 8 mm/sek.Hydraulic block:REXROTH demand for oil:500 lpressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mmfied interior wide:3100 mmauxiliary motor:5,5 + 2,2 kwauxiliary pump:22 + 5,5 ccpre-run valve:2 Stkpressure stop valve:max. 200 minLineal mess stab NOVOTECHNIK:550 mmTable parallelity:0,05 mm / m²Guide rails for parallelism :verschraubt Light sensors front and rear of SICK:-600 + 150 ...

pressure:500 tdistance between columns:1500 x 800 mmstroke:800 mmtotal power requirement:45 kWweight of the machine ca.:25 tdimensions of the machine ca.:2200 x 2200 x 4800 mMaster cylinder:1 Stückmain cylinder:500 Ø mmAuxiliary cylinder:2 StückAuxiliary cylinder:120 x 80 Ø mmTable size:1500 x 1400 (mit T-Nuten) mmwork height max.:950 mmpre-running speed:190 mm/secreturn speed:200 mm/secSpeed printing phase:20 - 8 mm/sek.Hydraulic block:REXROTH Oil Tank Capacity:1500 ldemand for oil:1300 lpressure control:über PLC Daylight Opening:1200 mmfied interior wide:1500 x 800 mmauxiliary motor:5,5 + 2,2 kwauxiliary pump:22 + 5,5 ccpre-run valve:NG pressure stop valve:max. 600 secLineal mess stab NOVOTECHNIK:850 mmTable parallelity:0,05 mm / m²column diameter:200 Ø / mmautomatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light sensors front and rear of ...

pressure:1000 tstroke:800 mmtotal power requirement:45 kWweight of the machine ca.:97 tdimensions of the machine ca.:4500 x 4400 x 5300 mReturn Capacity:40 tMain Cylinder:(d=500mm) 2 Stück:(140 x 80mm) 2 Stückspeed of forward flow:40 - 110 mm/secReturn Speed:150 mm/secPress speed (infinitely variable via PLC):3 - 12 mm/sTable size:3000 x 2300 x 200 mmRam plate:3000 x 2300 x 1000 mmdemand for oil:ca. 1300 l:210 l/min:600 sec:1500 x 150 mmHydraulic and mechanical protection of the plungerTwo-piece auxiliary motors with 2.2 kwTwo-piece auxiliary pumps with a power of 6 L/min.Concurrency monitoring (0.5 mm/m²)Fast forward speed adjustable via plcMaximum deflection of the table at 0, 07mm/m²

pressure:500 tpassage width:2100 x 1500 mmstroke:1000 mmtotal power requirement:62 kWweight of the machine ca.:39 tdimensions:5100 x 2800 x 4040 mmreturn capacity:40 tMain cylinder:2 Stückcolumn diameter:Hauptzylinder 360 mmTable dimensions:2100 x 1500 with T-Nute mmRam size:2100 x 1500 mmtable height over floor:850 mmpre-running speed:300 mm/secreturn speed:300 (bei 20T Stößelgewicht) mm/secPressure Speed:200T = 28 mm/secOil Tank Capacity:ca. 1000 lAuxiliary cylinder:2 Stückcolumn diameter:Hilfszylinder 120 mmTotal size Table Tops:ca. 2750 x 1600 mmTotal size of plunger plates:ca. 2750 x 1600 mmPressure Speed:300T = 20 mm/secPressure Speed:500T = 6 mm/secRetract force of the plunger:40 tTension of the control chain:24 Vvoltage:400 VFrequency:50 HzAxial piston pump (REXROTH/Bosch A4VSO125):290 lt/minDaylight Opening:1500 mmHydraulic block:REXROTH pressure control:über PLC (Mindestdr ...

pressure:40 tpassage width:2500 x 1300 mmstroke:1000 mmtotal power requirement:7 kWweight of the machine ca.:12 tdraw back pressure:4 tControll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mmworking area:2500 x 1300 mmTable dimensions:2800 x 1300 mmpestle plate:2800 x 1300 mmtable height:800 mmpre-running speed:9,8 mm/secwork speed:9,8 mm/minreturn speed:18 mm/secOil Tank Capacity:150 l

pressure:160 tstroke:600 mmtotal power requirement:7,5 kWweight of the machine ca.:7 tdraw back pressure:16 t:1 StückColumn-Diameter:160 mmdayligth:800 mmtable surface area:1200 x 800 mm:400 mmtable height:850 mmtable load:5 tpre-running speed:1 bis 9,8 mm/secreturn speed:1 bis 9,8 mm/secquantity of oil:220 l

pressure:40 ttable length:1000 mmtable width:700 mmweight of the machine ca.:9 tdimensions of the machine ca.:4000 x 4400 x 1800 mmstroke length max.:1050 mmdayligth:1200 mmtable rotating:um 180 Gradtable load:5 tpre-running speed:100 mm/secreturn speed:100 mm/secwork speed:von 0 bis 10 mm/sec.Main cylinder:1 StückTable extendable by:for 1050 mmTable tilting:50 GradFold-down upper tool:180 GradSpeed of table:25 mm/secLight sensors sick:1250 mmDescription:Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externalInduction hardened and chromium-plated.The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpointAnd the switch point at which the press should switch from empty journey to working speed, as well as theThe end position to be used can be easily and quickly entered via the  ...

pressure:40 tstroke:500 mmtotal power requirement:5 kWweight of the machine ca.:2,5 tdimensions of the machine ca.:2950 x 1300 x 2000 mmreturn capacity:6 twork height max.:700 mmpre-running speed:250 mm/sec:20 mmreturn speed:200 mm/secpestle plate:500 x 400 mmtable plate:600 x 450 mit T-Nuten mmTable cut-out:150 mm Durchmessertable height:1000 mm:200 lOil Cooling:elektrisch light-barrier:700 mm

pressure:63 ttable length:700 mmtable width:1000 mmweight of the machine ca.:ca. 9 tdimensions of the machine ca.:4500 x 4300 x 2700 m:1 Stückstroke length max.:1200 mmdaylight dimension : table/slide up:1200 mmtable height:700 mm:um 1200 mm:um 45 Grad:um 170 Grad:1250 x 1000 mmtable load:5 t:25 mm/secpre-running speed:95 mm/secreturn speed:80 mm/secwork speed:von 0 bis 10 mm/sec.

pressure:200 tdistance between columns:1200x1000 mmstroke:600 mmtotal power requirement:32,5 kWweight of the machine ca.:20,5 tdimensions of the machine ca.:4000x2600x5000 mdraw back pressure:20 tMaster cylinder:1 Stückvoltage:400 Vfrequency:50 Hz:24 V:BOSCH/REXROTH dayligth:800 mm:1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mmwork height max.:1100 mmpre-running speed:170 mm/secreturn speed:150 mm/secSpeed printing phase:15 mm/sek.Hydraulic block:REXROTH demand for oil:500 lpressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) Vmemory:200 Programme :über Monitor von 20-200 tControll:Zweihandbedienung beweglich :2-10 mm/sec:0-10 sec