We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
subcategories
Manufacturer
- (4)
- Assembly Presses (1)
- Balling Presses (1)
- Bending And Straightening Presses (11)
- Bending Presses (128)
- Blanking Presses (1)
- Bolt Presses (1)
- CNC Bending Presses (43)
- Crank Presses (13)
- Deburring Presses (8)
- Die Forging Hammer (2)
- Die Spotting Presses (20)
- Double Column Eccentric Presses (3)
- Double Column Presses (10)
- Double Column Pulling Presses (4)
- Eccentric Presses (96)
- Edge-Merging Presses (8)
- Fine Presses (18)
- Fly Presses (3)
- Fly Presses With Electro Mechanical Drive (5)
- Four Point Crank Presses (1)
- Friction Spindle Presses (2)
- H-Frame Drawing Presses (1)
- H-Frame Eccentric Presses (1)
- H-Frame Toggle Lever Presses (1)
- High Speed Presses (10)
- Horizontal Forging Machines (5)
- Horizontal Presses (8)
- Hydraulic Column Presses (3)
- Hydraulic Die-Spotting And Try-Out Presses (4)
- Hydraulic Double Column Presses (17)
- Hydraulic Fine Blanking Presses (8)
- Hydraulic Flanging Presses (1)
- Hydraulic Forging Presses (5)
- Hydraulic H-Frame Drawing Presses (12)
- Hydraulic H-Frame Presses (6)
- Hydraulic Open Gap Bench Presses (1)
- Hydraulic Open Gap Drawing Presses (3)
- Hydraulic Open Gap Presses (38)
- Hydraulic Presses (85)
- Hydraulic Stretch Forming Presses (1)
- Knuckle Joint Presses ( 1 - 3 Columns) (15)
- Low-Pulling Presses (2)
- Mandrel Presses (1)
- Manual Spindle Presses (9)
- Manually Operated Presses (4)
- Mechanical Presses (27)
- Open Gap Eccentric Presses (98)
- Open Gap Toggle Lever Presses (10)
- Other Eccentric Presses (2)
- Other Hydraulic Presses (5)
- Other Mechanical Presses (6)
- Pneumatic Bench-Type Presses (6)
- Pneumatic Presses (11)
- Press Brakes (4)
- Presses For Special Applica (2)
- Profile Cold Rolling Mills (1)
- Punching Machines (25)
- Punching Presses (15)
- Shaft Straightening Presses (1)
- Single Column Presses (19)
- Straight-Bending Presses (20)
- Toggle Lever Presses (6)
- Transfer Presses (2 - 4 Columns) (5)
- Workshop Presses (70)
- more
- A+B FASTECH (1)
- A. U. SÖHNE (1)
- AB (1)
- ACHTERMANN + CO (1)
- ACME (2)
- ADIRA (1)
- AGEO (5)
- AIDA (3)
- AJAX (1)
- ALIKO (1)
- ALLGAIER (1)
- ALPMAC (2)
- AMADA (11)
- AMADA PROMECAM (1)
- AMADA-PROMECAM (1)
- AMADEO FARELL (1)
- ANGER (1)
- Arisa (3)
- ARKU (1)
- ARNO (1)
- ARNOLD (2)
- ASAHI SUNAC (1)
- ATLA COOP (1)
- ATLANTIC (5)
- ATSUGI (1)
- BAKKER (1)
- BARNAUL (3)
- Baykal (5)
- BBT (1)
- BELTECH (1)
- BELTECH GMBH (1)
- Berg + Schmid (3)
- Bernardo (6)
- Berrenberg (4)
- BETZ (1)
- BEUTLER (4)
- BEYELER (2)
- BEYELER MAMMUT (1)
- BILLAUD (1)
- BLEMA ZEULENRODA (1)
- Borries (2)
- Bosch (2)
- BOSCHERT (1)
- BPRESS (1)
- BRAUN (1)
- BREDA - DANIELI (1)
- BRUDERER (16)
- BRÜCK (1)
- BURGER (1)
- BURKHARDT (1)
- BYSTRONIC (3)
- BYSTRONIC + KUKA (1)
- BöLLHOFF (1)
- CALLAHAN (1)
- Cavenaghi Ridolfi (3)
- Chambersburg (3)
- CLEARING (1)
- CLECIM (1)
- CoastOne (5)
- COLLY (2)
- COLOMBO (1)
- COTELLI (1)
- CRIMPONE (1)
- DARLEY (6)
- DEGUMA (1)
- DELLAVIA (1)
- DELTECO (2)
- DERATECH (1)
- DIEBELS (1)
- DIEFFENBACHER (4)
- Dirinler (8)
- DNIPROPRESS (1)
- DONEWELL (1)
- DORST (19)
- DR. FRITSCH (1)
- DUNKES (15)
- Durendus (11)
- DURMA (5)
- DURMA/KNUTH (1)
- EBU (17)
- EDEL (1)
- EDELHOFF (4)
- EHT (13)
- EITEL (4)
- Elumatec (2)
- EM HART, TUCKER (1)
- EMANUEL (1)
- EMANUEL 500 TON (1)
- EPG CHINA (1)
- ERFURT (14)
- ERMAK (6)
- ESNA (1)
- ETP (1)
- EUROMAC (1)
- EXNER (5)
- FACCIN (1)
- FALKEN (8)
- FALKEN // FASTECH (1)
- FARREL (1)
- Fasti (3)
- ... more
The distance indication is not possible, because your location could not be determined. Prerequisite is that your browser allows cookies and location determination.
Manufacturer:
(Category: 106)
AB 1
ACME 2
ADIRA 1
AGEO 5
AIDA 3
AJAX 1
ALIKO 1
ALLGAIER 1
ALPMAC 2
AMADA 11
ANGER 1
Arisa 3
ARKU 1
ARNO 1
ARNOLD 2
ATLANTIC 5
ATSUGI 1
BAKKER 1
BARNAUL 3
Baykal 5
BBT 1
BELTECH 1
Bernardo 6
BETZ 1
BEUTLER 4
BEYELER 2
BILLAUD 1
Borries 2
Bosch 2
BOSCHERT 1
BPRESS 1
BRAUN 1
BRUDERER 16
BRÜCK 1
BURGER 1
BöLLHOFF 1
CALLAHAN 1
CLEARING 1
CLECIM 1
CoastOne 5
COLLY 2
COLOMBO 1
COTELLI 1
CRIMPONE 1
DARLEY 6
DEGUMA 1
DELLAVIA 1
DELTECO 2
DERATECH 1
DIEBELS 1
Dirinler 8
DONEWELL 1
DORST 19
DUNKES 15
Durendus 11
DURMA 5
EBU 17
EDEL 1
EDELHOFF 4
EHT 13
EITEL 4
Elumatec 2
EMANUEL 1
ERFURT 14
ERMAK 6
ESNA 1
ETP 1
EUROMAC 1
EXNER 5
FACCIN 1
FALKEN 8
FARREL 1
Fasti 3
FEINTOOL 22
FMS 3
G + K 1
GADE 2
GECHTER 1
GEKA 1
GEORG 2
GEPPERT 2
GFU 1
Gigant 2
GPRESS 11
GRÄBENER 10
GWF 2
GöTZ 1
HACO 7
HARE 1
HATASTAR 1
HBM 1
HECKERT 1
HEILBRONN 10
HEKUS 1
HEUSER 2
HIDROLIKSAN 26
HILALSAN 2
HILU 1
HORNUNG 1
HUVEMA 3
Hydrap 5
HYDRASAN 1
HYMAG 1
HYUNDAE 1
Hämmerle 5
IMS 3
INANLAR 1
INTEMACH 1
IWK 4
JAM 1
JANTSCH 1
JENNY 2
JHL 1
JKM 1
JOSSI 1
JÖRG 1
KAISER 8
KALISZ 1
KAWASAKI 1
KEYENCE 1
KNUKLE 1
Knuth 2
Komatsu 4
KRUPP 3
KUNKEL 1
KöPPERN 1
LA G 1
LASCO 3
LAUFFER 7
LBM 1
LINDE 1
LOEWY 1
LOIRE 1
LOTZE 1
LUTHER 1
LVD 14
LVD CO. 1
LöWENER 1
MA.TE 1
Mabu 2
MAE 4
MAMMUT 1
Masch 2
MASSI 1
MAYPRES 1
Mecamaq 2
MEGOBAL 1
Mengele 6
MHF 1
MINSTER 1
MIOS 1
MIOTAL 3
MUBEA 1
MURARO 1
Müller 36
N.B. 2
NB 4
NBEKANNT 1
NEFF 3
NEHER 2
NKMZ 4
OMC 1
OMCN 1
OPTIBELT 1
OTINUS 1
PEISELER 1
PERSICO 1
PHOENIX 1
PLACKE 1
PLASOMAT 1
approved
dealer
dealer
pressure: 63 tthroat: 315 mmstroke: 8-100 mmno. of strokes: 140 Hub/minram - range of adjustment: 63 mmtable surface area: 1200x630 mmram surface: 800x315 mmhole in the table: Ø 110 mmtable height: 820 mmtool hole in ram: Ø 50 mmdayligth: 335 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 200 tstroke: 150 mmtable surface area: 850x650 mmram surface: 730x560 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2000x2500x3600mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 25 tthroat: 250 mmstroke: 100 mmram surface: 500x400 mmhole in the table: Ø 110 mmtable height: 850 mmtool hole in ram: Ø 40 mmram surface: Ø 150 mmweight of the machine ca.: 2,5 tdimensions of the machine ca.: 1500x2000x2200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 380 mmstroke: 300 mmarm length: 380 mmtable surface area: 1700x700 mmram surface: 1400x700 mmdayligth: 650 mmtotal power requirement: 30 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 2400x3600x3400 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tpassage width: . mmstroke: . mmtracking travel: 45 mmsafety distance: 208 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 40 tdistance between columns: 600 mmstroke: 150 mmtable surface area: 600x410 mmram surface: 220x130 mmtable height: 850 mmweight of the machine ca.: 2,5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 40 tthroat: 230 mmstroke: 8-88 mmthroat: 230 mmno. of strokes: 130 Hub/minram - range of adjustment: 63 mmtable surface area: 560x450 mmram surface: 250x200 mmhole in the table: Ø 190 mmtable height: 790 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,0 tdimensions of the machine ca.: 1000x1800x2500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 130 tthroat: 350 mmstroke: 16-200 mmno. of strokes: 55 Hub/minram - range of adjustment: 100 mmtable surface area: 1200x700 mmram surface: 730x530 mmhole in the table: 300x210 mmtable height: 900 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8,0 tdimensions of the machine ca.: BxTxH 1500x2200x3500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tthroat: 280 mmstroke: 8-100 mmram surface: 310x260 mmtable surface area: 620x500 mmhole in the table: Ø 250 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmweight of the machine ca.: 4,0 tdimensions of the machine ca.: 1200x1900x2800 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 16 tthroat: 185 mmstroke: 8-60 mmno. of strokes: 140 Hub/minram - range of adjustment: 50 mmtable surface area: 500x340 mmram surface: 230x155 mmhole in the table: Ø160 mmtable height: 800 mmhole in the table: Ø35 mmweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1200x1200x2000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 410 mmstroke: 8-112 mmno. of strokes: 55/82 Hub/minram - range of adjustment: 80 mmtable surface area: 950x700 mmram surface: 700x450 mmhole in the table: Ø 280 mmtable height: 800 mmtotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: BxTxH 1600x2200x3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tstroke: 6-60 mmno. of strokes: 90-550 Hub/min: 300 mmtable surface area: 780x600 mmram surface: 807x460 mmtool hole in ram: Ø 40 mmram - range of adjustment: 80 mmtotal power requirement: 15 kWweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 2900x2000x3000 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tthroat: 320 mmstroke: 8-112 mmno. of strokes: 60 Hub/minram - range of adjustment: 80 mm: 355 mmtable surface area: 720x550 mmram surface: 400x310 mmsheet thickness - max.: 11 mmweight of the machine ca.: 9,5 tOverall size: 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tthroat: 285 mmstroke: 10-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 60 mmtable surface area: 850x640 mmram surface: 420x210 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: BxTxH 2500x2500x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 10 tthroat: 170 mmstroke: 6-60 mmno. of strokes: 160 Hub/minram - range of adjustment: 40 mmtable surface area: 420x320 mmram surface: 180x140 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 32 mmweight of the machine ca.: 1 tdimensions of the machine ca.: 1200x1200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 100 tthroat: 380 mmstroke: 400 mmpower capacity: 22 kWdayligth: 600 mmram surface: 600x500 mmtable surface area: 720x600 mmweight of the machine ca.: 9 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tstroke: 4-60 mmno. of strokes: 85-500 Hub/minram - range of adjustment: 80 mm: 320 mmtable surface area: 750x600 mmram surface: 750x600 mmtotal power requirement: 31 kWweight of the machine ca.: 8,2 tdimensions of the machine ca.: BxTxH 2900x1900x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 80 tthroat: 280 mmstroke: 8-112 mmno. of strokes: 55 / 82 Hub/minram - range of adjustment: 80 mmtable surface area: 800x570 mmram surface: 560x355 mmhole in the table: Ø 280 mmtable height: 800 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1600x2200x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 63 tthroat: 330 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 850x600 mmram surface: 550x360 mmhole in the table: Ø 240 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4,5 tdimensions of the machine ca.: 1300x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 250 tdistance between columns: 0 mmstroke: 0 mmtotal power requirement: 0 kWweight of the machine ca.: 0 tdimensions of the machine ca.: 0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Directivity: 100 t Projection: 325 mm Table size: 490 x 3500 mm Max. stroke: 160 mm Pushrod speed upwards: 206 mm/s Slide speed downwards: 68 mm/s Hydraulic drive: 380 V, 15 kW Space requirement: 3500 x 1650 x 2760 mm Weight: 5500 kg
approved
dealer
dealer
pressure: 50 tthroat: 230 mmstroke: 12-110 mmno. of strokes: 40-100 Hub/minram - range of adjustment: 70 mmtable surface area: 740x440 mmtable height: 840 mmhole in the table: Ø 140 mmram surface: 460x300 mmtool hole in ram: Ø 45 mmtotal power requirement: 4 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: BxTxH 1500x2500x2510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 75 tstroke: 8-80 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 70 mmtable surface area: 900x600 mmram surface: 900x470 mmhole in the table: 450x180 mmdist. between columns - front to rear: 500x350 mmdist. between pillars (front to rear): 788 mmtotal power requirement: 10 kWweight of the machine ca.: 10 tdimensions of the machine ca.: BxTxH 1600x1200x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
pressure: 200 tthroat: 450 mmstroke: 30 - 140 mmtable surface area: 1100 x 850 mmdayligth: 500 mmram surface: 800 x 600 mmram adjustment: 110 mmtool hole in ram: Durchm. 65 x Tiefe 105 mmno. of strokes: 45 Hub/mintotal power requirement: 15 kWweight of the machine ca.: 14,2 tdimensions of machine L x W x H: 3,18 x 2,09 x 3,05 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
approved
dealer
dealer
Qty. 1 Second-hand 160 MN Horizontal Direct Single Action Extrusion Press Mfc.: SMS Force: 16 000 MT Built: 2015/2016 Billet dim.: Dia. 610/720 x 750 – 2500 mm Scope of supply: Induction Billet Furnace Extrusion Press Quenching System Puller Run-Out Table Stretcher Finishing Saw Profile Stacker Die Oven Billet Peeling Machine
approved
dealer
dealer
Hydropneumatic mode of operation Max. Punch Height: 90 mm Wither stroke: 100 mm Punching stroke: 20 mm Press force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
approved
dealer
dealer
Key data: 2200 t
Qty. 1 Second-hand extrusion press – 2200 MT Mfc.: Breda Danieli Built: 2016 Status: still in production Max. Extrusion Force: 21,9 MN at 300 bar Max. working pressure: 310 bar Type of press: back loading with 2 containers Billet size 8” - length: 300 – 1,200 mm Scope of supply: complete extrusion press in working order with hydraulic and electric system Overhead pinch billet manipulator Material: AL 6000 Series Out of the scope of supply: floor frame mounted in the concrete floor all dies and tooling bolsters
