presses used for sale (1,636)

pressure:100 tstroke:1000 mmtable surface area:1045 x 1045 mmtable extendable:800 mmtable speed:50 mm/secdimensions:ca. 2550 x 2850 x 3620 mmheight over floor:600 mmdiameter of piston:76 mmram diameter:110 mmram hole:40 H7 Cylinder:300 mmtotal power requirement:5,5 kWpump capacity:24,9 Lt./minPressure power:250 bar:200 ldaylight opening:1600 mmdaylight:1200 mmweight of the machine ca.:6,6 thollow:180 mmhollow:400 mm:1000 kg:1 - 10 mm/secwork stroke:3 mm/sec:1 - 25 mm/sec:33 mm/sec

pressure:110 tpassage width:1500 mmstroke:650 mmtotal power requirement:15 kWweight of the machine ca.:11 tdimensions:ca. 2640 x 3200 x 3650 mmreturn capacity:11 tcolumn diameter:120 mmMax Working height:1000 mmTable dimensions:1990 x 1000 mmRam size:1990 x 1000 mmDrivering away pestle:650 mmtable height over floor:800 mmpre-running speed:10 mm/secPressure Speed:10 mm/secOil Tank Capacity:200 lOil cooling (electric):1,5 kW (max)

pressure:63 tpassage width:700 mmstroke:500 mmApprox. weight (w/o operational materials):5,1 tMeasurements L x W x H:ca. 1500 x1600 x 2995 mmReturn Capacity:6 tEngine Output:11 kWMax Working height:700 mmApproaching Speed max. :140 mm/secPressure Speed:15 mm/sec.Travel:500 mmRam plate:600 x 540 mmTable size:750 x 600 mmTable height above ground level:850 mmOil Tank Capacity:150 lControl voltage:24 VFrequency:50 HzSiemens Control System:S7 1200 Monitor:Siemens 12 ZollSpecial feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:20 tdistance between columns:200 mmstroke:200 mmweight of the machine ca.:1,5 tdimensions of the machine ca.:2000 x 1420 x 760 mheating plates :660 x 220 mm:200 mm:200 mmOil Tank Capacity:70 lTable Height:1100 mm:125 mmRam Height:250 mm

pressure:56 ttable length:1000 mmtable width:700 mmdaylight opening:1200 mmNo. of Cylinders:1 St.stroke length max.:1200 mmtable height over floor:700 mmtable extendable:1200 mmSpeed of table:25 mm/secTable tilting:45 Gradtable load:5 tFold-down upper tool:170 Grad:1250 x 1000 mm:95 mm/secspeed of return flow:80 mm/secworking feed:0 - 10 mm/secdimensions:4300 x 2700 x 4500 mmtotal weight:8,5 tMonitor Siemens:9 Zoll:1200 mm

pressure:40 tstroke:250 mmreturn capacity:6,3 tmotor:5,5 kwMax Working height:450 mm:90 mm/sec.:10 mm/sec.spindle stroke:250 mmpestle plate:500 x 200 mmtable plate:600 x 650 mit T-Nuten mmTable cut-out:200 x 170 mmtable height:850 mm:200 l

pressure:40 tstroke:250 mmreturn capacity:6,3 tmotor:5,5 kwMax Working height:450 mm:90 mm/sec.:10 mm/sec.spindle stroke:250 mmpestle plate:500 x 200 mmtable plate:600 x 650 mit T-Nuten mmTable cut-out:200 x 170 mmtable height:850 mm:200 l

pressure:40 tpassage width:2500 x 1300 mmstroke:1000 mmtotal power requirement:7 kWweight of the machine ca.:12 tdraw back pressure:4 tControll:Zweihandbedienung cylinder:1 work height max.:2200 (zwischen Stößel und Tischplatte) mmworking area:2500 x 1300 mmTable dimensions:2800 x 1300 mmpestle plate:2800 x 1300 mmtable height:800 mmpre-running speed:9,8 mm/secwork speed:9,8 mm/minreturn speed:18 mm/secOil tank capacity:150 l

pressure:200 tstroke:800 mmtotal power requirement:25 kWdraw back pressure:16 t:1 StückColumn-Diameter:150 mmdayligth:1200 mmRam Height:1000 mmRam size:1300 x 2220 mmtable surface area:1500 x 1300 mm:1300 x 2220 mm:820 mmtable surface area:1500 x 1300 mmtable height:800 mmtable load:8 tpre-running speed:1 - 9,8 mm/secreturn speed:2,5 - 25 mm mm/secquantity of oil:300 lweight of the machine ca.:17 tDimensions (L/W/H):2420 x 1300 x 4782 mm:0 - 200 T:1 - 10 mm:elektrisch

pressure:40 ttable length:1000 mmtable width:700 mmweight of the machine ca.:9 tdimensions of the machine ca.:4000 x 4400 x 1800 mmstroke length max.:1050 mmdayligth:1200 mmtable rotating:um 180 Gradtable load:5 tpre-running speed:100 mm/secreturn speed:100 mm/secwork speed:von 0 bis 10 mm/sec.Main cylinder:1 StückTable extendable by:um 1050 mmTable tilting:50 GradFold-down upper tool:180 GradSpeed of table:25 mm/secLight sensors sick:1250 mmColumns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated.The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the monitor control.The w ...

pressure:500 tpassage width:1300x800 mmstroke:600 mmweight of the machine ca.:18 tdimensions of the machine ca.:2400 x 2400 x 5500 mdraw back pressure:50 tControll:Zweihandbedienung cylinder:1 Stückmotor:50 kwOil Cooling:elektrisch column diameter:200 mmwork height max.:700 mmTable dimensions:1900 x 800 mmtable height over floor:1000 mmpestle plate:1300 x 800 mmpre-running speed:150 mm/secwork speed:5-10 mm/sec.return speed:150 mm/sec:1500 lquantity of oil:1400 l

pressure:150 ttotal power requirement:20 kWweight of the machine ca.:11,5 tdimensions of the machine ca.:8800 x 1800 x 2200 mmPressure adjustment via rotary control infinitely adjustable:15-150 tCylinder diameter:100 mmPress speed (infinitely variable via joystick):0-9,9 mm/sservo motor:2 kWCooling unit:1 kWOil tank (under table):350 lOil cooling (electric):1 kW (max)

pressure:110 tpassage width:800 mmstroke:500 mmApprox. weight (w/o operational materials):5 tMeasurements L x W x H:ca. 1950 x 1510 x 3145 mmReturn Capacity:11 tEngine Output:20 kWCylinder diameter:200 mmMax Working height:700 mmApproaching Speed max. :195 mm/secPressure Speed:1 - 15 mm/sec.Return Speed:5 - 140 mm/secTravel:500 mmRam plate:800 x 600 mmThickness of ram plaet:6 ZollTable size:800 x 700 mmTable height above ground level (approx.):900 mmOil Tank Capacity:400 lProgram Memory:200 prgmsMonitor Siemens:10 ZollSiemens Control System:S7 1200 Lightcurtains by Schmersal:700 mmSpeed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return.HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tonsSiemens remote access for maintenance purposesMotor with energy efficie ...

pressure:110 tpassage width:1500 mmstroke:650 mmtotal power requirement:15 kWweight of the machine ca.:11 tdimensions:ca. 2640 x 3200 x 3650 mmreturn capacity:11 tcolumn diameter:120 mmMax Working height:1000 mmTable dimensions:1990 x 1000 mmRam size:1990 x 1000 mmDrivering away pestle:650 mmtable height over floor:800 mmpre-running speed:10 mm/secPressure Speed:10 mm/secOil Tank Capacity:200 lOil cooling (electric):1,5 kW (max)

pressure:160 tpassage width:1200 mmstroke:600 mmWeight of machine approx.:7 tdimensions:ca. 2400 x 1400 x 3400 mmreturn capacity:16 tMax Working height:800 mmReturn Speed:25 mm/secpestle plate:1670 x 800 mmtable plate:1670 x 800 mmtable height over floor:800 mmOil cooling (electric):1,5 kW (max)Engine Output:18 kWspeed of forward flow:10 mm/secpressure speed:10 mm/secTravel:600 mmOil Tank Capacity:300 l

pressure:40 tpassage width:850 mmstroke:500 mmWeight of machine approx.:ca. 3,8 tdimensions:ca.1300 x 1800 x 3200 mmreturn capacity:4 tpestle plate:600 x 450 mmtable plate:750 x 720 mmtable height over floor:850 mmOil cooling (electric):1,5 kW (max)max. working heidht:700 mmmotor capacity:12,7 kWApproaching Speed max. :140 mm/secpressure speed:15 mm/secReturn Speed:140 mm/secOil Tank Capacity:160 lMonitor:WEG - 10 ZollSiemens Control System:S7 1200

pressure:63 tpassage width:700 mmstroke:500 mmApprox. weight (w/o operational materials):5,1 tMeasurements L x W x H:ca. 1500 x1600 x 2995 mmReturn Capacity:6 tEngine Output:11 kWMax Working height:700 mmApproaching Speed max. :140 mm/secPressure Speed:15 mm/sec.Travel:500 mmRam plate:600 x 540 mmTable size:750 x 600 mmTable height above ground level:850 mmOil Tank Capacity:150 lControl voltage:24 VFrequency:50 HzSiemens Control System:S7 1200 Monitor:Siemens 12 ZollSpecial feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

pressure:10 tdistance between columns:200 mmstroke:200 mmweight of the machine ca.:1,5 tdimensions of the machine ca.:2000 x 1420 x 760 mheating plates :660 x 210 mm:200 mm:200 mmOil Tank Capacity:70 lTable Height:1100 mm:125 mmRam Height:250 mm

pressure:160 tpassage width:1000 mmstroke:800 mmtotal power requirement:22 kWweight of the machine ca.:13 tdimensions:2300 x 2850 x 4000 mmreturn capacity:16 tTable dimensions:1430 x 1000 mm:1430 x 1000 mmtable height over floor:850 mmpre-running speed:200 mm/secreturn speed:200 mm/secPressure Speed:15 mm/sec:400 lOil cooling (electric):1,5 kW (max)Max Working height:1000 mm:200 mm/secMonitor:10 Zoll

Tool cases for press-fit machines Tool holder type Haeger (compatible) 22 press-in tools for press-fit-in contact-press-persefesters Manufacturer: PressOne - Made in Finland

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

a hydraulic single-stand drawing press Müller model CLZ.100.1.34, Y.O.M. 1994, good condition, with UVV, Siemens S7 screen control, throat gap 400 mm, installation height 800 mm, table surface 800 x 730 mm, stroke 600 mm, drawing cushion 40 to., drawing cushion stroke 200 mm.

Ortlinghaus coupling outer diameter 680 mm from stock as good as new

Qty. 1 Second-hand press for production of Aluminium pots and discs Mfc.: SITI Built: 2005 Renewed in by experts Duration: 3-4 months Force: 4000 Ton Production of Aluminium discs & induction & normal pots Pots height: 120 / 140 mm The press will be overhauled and revamped and sold as specified below: New Piston Grinding of cylinder New Flange Table modification New pumps New gaskets etc . New electric and electronical parts New program

Stroke power: 180 KN (18 tons). Adjustable speed: 100 - 600 strokes per minute. Adjustable stroke: 4 - 36 mm. In very good working condition. Feeder: BBV 60/60 Max. Strip Width: 60 mm. Max. Feeding Length: 60 mm. Max. Thickness: 2 mm. With stroke and speed counter. Programmable speed, number of strokes etc. Three working modes: manual, one stroke and automatic. Heavy Duty, for non stop production. Pneumatic clutch and brake. Machine with warranty 6 months. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx 1.2 tons. Power consumption: 2.2 KW. Technical Air: 8 bar.

STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5