presses used for sale (1,636)

pressure: 2 tdistance between columns: - mmstroke: ? mmthroat: ? mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mhydraulic press 2tDrive: 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HUNGER Maschinenbau GmbH Press cylinder for a hydraulic metal scrap press / scrap press shear (Metso-Lindemann) fully assembled and ready for installation Piston diameter 260mm Piston rod diameter 210mm Stroke 8910mm Outer diameter of the housing 335 mm Cylinder head diameter 365mm Total length 10,635 mm Working pressure cylinder head 180 bar Working pressure cylinder base 225 bar Test pressure cylinder head 250 bar Test pressure cylinder base 315 bar Maximum pressure force 1195 kN Maximum tensile force 332 kN Medium hydraulic oil ISO VG46 Installation position horizontal

pressure: 20 tstroke: 200 mmtable-size: 550 x 550 mmworking speed:: 10 mm/ sec.work height max.: 940 mmtoolpiece height max.: 200 mmtotal power requirement: 2,2 kW: 200 x 10 mmweight: 650 kgdimensions: 1,1 x 0,6 x 1,22 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 tthroat: 295 mmstroke: 20-120 mmno. of strokes: 60/90 Hub/minram adjustment: 85 kWtable surface area: 920x580 mmram surface: 540x280 mmhole in the table: Ø280 mmtable height: 830 mmweight of the machine ca.: 5,1 tdimensions of the machine ca.: BxTxH 1500x2000x2560 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tthroat: 280 mmstroke: 10-90 mmno. of strokes: 110 Hub/minram - range of adjustment: 60 mmtable surface area: 750x540 mmram surface: 600x200 mmhole in the table: 300x200 mmtable height: 780 mmtool hole in ram: Ø35 mmweight of the machine ca.: 3,7 tdimensions of the machine ca.: 1800x1800x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 32 t

For sale is: 1 piece used punching machine incl. pliers feeder Manufacturer: Mabu Pressen AG Type: 32HSS Pliers Feeder: RC11 Year of manufacture: 2002 Operating hours: approx. 15,000 Compressive force: 320KN Stroke rate: 100 - 1000 Stroke adjustment: 5 - 40 Weight: 6.200Kg For more technical data, see nameplate and photo documentation. incl. complete documentation. More pictures and video on request. The punch can be viewed in our warehouse in 09599 Freiberg.

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

with the following standard equipment: Chromed cylinder, welded steel frame, oil pressure gauge, pressure adjustment Optional equipment possible for an extra charge: Pressure Regulator, V-Block, Automatic Control, Hydraulically Moving Cylinder Pressure: 80 t Stroke: 400 mm Total power requirement: 3 kW Machine weight: 725 kg Dimensions: 900 x 1560 x 2400 mm Passage in the table: 900 mm Working speed: 5.4 mm/sec Return speed: 8.3 mm/sec

Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German.

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Key data: 160 t, 800 mm, 500 mm

Manufacturer: VEB Wema Zeulenroda Type: PYE 160 S1 Stock number: 1024 Maximum pressing force: 160 tons Working pressure: 16 MPa Top table: 700 x 450 mm Lower table: 900 x 630 mm Ground clearance: 800 mm Cylinder stroke: 500 mm Downward speed: 200 mm/sec. Upward speed: 125 mm/sec Power requirement: 17 kW Oil volume in the tank: 500 l Weight: 7000kg

pressure: 125 tchamfer lenght: 3000 mmdistance between columns: . mmControl: CNC type: DA 65 R stroke: 200 mmsafety distance: 136 mmrapid traverse - down: 100 mm/secrapid traverse - up: 92 mm/secworking feed: 1-10 mm/secthroat: mmtotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press vineyard type AR160 tons With protective shield. YOC 1971 2 rotational speeds via mechanical gearbox Switchable. Central lubrication. Low-wear steep-threaded coupling. Table dimensions : 800x1000 mm Visits : possible at any time. Total weight approx. 10.5 tons

Specifications: Capacity 40 tons 2 strokes 57 + 86 H/min Projection 250 mm Plunger stroke 8 - 88 mm Plunger adjustment approx. 63 mm Table , WxD approx. 570 x 450 mm Max. installation height approx. 330 mm

Specifications: Capacity 300 to Stroke rate 35 strokes Plunger width 1000 mm Projection 450 mm Plunger stroke 20 - 140 mm Plunger adjustment 80 mm Engine power 30 hp Weight roughly estimated 18 tons

Key data: 15 t, 66 mm

Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Specifications: Press force adjustable 10 – 100 kN Projection 210 mm Table size W x D approx. 500 x 400 mm Installation height with/without clamping plate 300 mm Stroke 100 mm

Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm

Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm

Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm

Key data: 18 t

Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm

Key data: 30 t, 100 1/min

Specifications Pressing force 30 t Stroke rate 100 – 600 mm Plunger stroke adjustable up to 40 mm Installation height 300 mm with built-in clamping plate

Key data: 1 t

Machine Type: Toggle Press Manufacturer: Schmidt Type: 14R-08-2007 Year of construction: 2007 Weight: approx. 23kg Force max. 12KN Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 590 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-9 DESCRIPTION We offer you a used toggle lever press from the manufacturer Schmidt. A further 54 presses are on offer. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Key data: 75 t, 80 mm, 250 1/min

Pressing force: 75t Table: 650 x 560 mm Plunger area: 500 x 300 mm Stroke rate: 50-250 stroke/min Lifting height: 8-80 mm max. installation height: 400 mm Passage between the side stands: 300 mm Feeder: Manufacturer: GSW Type: WV32/80 Band width: max. 320mm Tape thickness: max. 3.5mm Roller diameter: 80mm

pressure: 40 tdistance between columns: 695 bzw. 215 mmstroke: 100 mmtable surface area: 650 x 440 mmram surface: 580 x 285 mmdayligth: 400 mmtotal power requirement: 15 kWweight of the machine ca.: tdimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m- with die cushion- with light bareer make SICKThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 tchamfer lenght: 4100 mm: 600 : 250 : 2900 mmStroke: 265 mmthroat: 400 mmdistance between columns: 3750 mmdayligth: 550 mmtable width: 60 mmoil volume: 600 lweight: 29.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28 tpiston stroke: 180 mmdiameter of piston: 130 mmtable-size: 300 x 550 mmworking feed: 2 - 9,8 mm/sekreturn speed: 20 mm/secMax. pressure: 200 barbending capacity - flat iron: 200 x 10 mmweight of the machine ca.: 800 kgdimensions: ca. 1150 x 1103 x 750 mmThe horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles.With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold ...

pressure: 100 tthroat: 345 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 85 mmtable surface area: 980x650 mmram surface: 600x440 mmhole in the table: Ø 200 mmtable height: 820 mmtool hole in ram: ¤7 65 mmweight of the machine ca.: 7 tdimensions of the machine ca.: 2000x2000x2900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.