CNC Turning Machines used for sale (562)

Lathe Monforts RNC4 1988 and 1995 Lathe Monforts RNC 5 BJ 1992 Lathes Monforts RNC7 BJ 1992 and 1993

turning diameter: 400 mmturning length: 600 mmcontrol: Turn Plus CNC Pilot 3190 total power requirement: 44 kVAweight of the machine ca.: 5 tdimensions of the machine ca.: 6 2,5 2 mMachine has been in use until now ( 2-axis turning )Known defects:- Driven tools without function- Tailstock leaking - out of service- Sporadic problems hydraulics / leakingKurzvideo:https://www.youtube.com/watch?v=OHlzAkbGW_UThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height  ...

turning diameter: 533 mmturning length: 660 mmcontrol: Haas total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control HaasC-axisdriven tools12-fold revolverhydraulic 3-jaw chuckTool Eyechip conveyorcoolant devicewithout tailstockTechnische Daten / technical details:max. Drehlänge / max. turning lenght 660 mmmax. Drehdurchmesser / max. turning diameter 533 mmUmlaufdurchmesser über Bett / rotary diameter over bed 806 mmDrehzahl Spindel / spindle speed 3400 UpM /rpmAnzahl Revolverwerkzeugplätze / number of places in revolver 12 fach /foldEilgang Z, X / rapid feed Z, X 24 m/minAntriebsleistung Spindel / drive capacity spindle 22,4 kWGewicht der Maschine ca. / weight ca. 4100 KgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description o ...

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

USED HARDINGE GT-CE CNC LATHE SerialNo.: GT-753-BMainspindle Bar diameter: 27 mmDiameter above bed: 300 mmSpindle nose: A2-4Spindle power: 3.7 kWSpindle speed: 60-6000 rpmAxle travel: X=281 mm - Z=304 mmEquipped with1 FANUC 18-T CNCDimensions and weight1800x1500xH1800mm - weight 2500kg Auction-ID: A1-50950-24

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

turning diameter: 186 mmturning length: 350 mmcontrol: FANUC O/T turning speeds: 4.000 U/minspindle bore: 61,0 mmtool holder: 12 Stückchucking diameter: 170 mmoperating hours: htotal power requirement: 7,5 kWweight of the machine ca.: 2,4 t- FANUC - CNC control- SMB 600 bar feeder with magazine- Chip conveyor- 3-jaw lathe chuck, 170 mm- MK 4 tailstock- Various tool holders- Cooling system- Full enclosureThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

CNC control: MSX-850 IIINumber of axes: 2Strokes: X = 260 mm, Z = 590 mmSpindle speed: 50 – 5000 rpmPower: 15 kWBar capacity: Ø 65 mmSpindle bore: 73 mm Turret: 12 stations (BMT)Max turning diameter: 356 mmMax turning length: 510 mmChip conveyor: yes235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-50714-4004

The machine is in very good technical condition, testing is possible by prior arrangement.

CNC Control: FANUC 21i-TBNumber of axes: 3 (including C-axis)Max. rotation diameter: 120 to 150 mm (depending on tooling)Max. turning length: 120 mmX/Z axis strokes: 340 / 240 mmMax. spindle speed: up to 8,000 rpmSpindle nose: designed for precision grippers or chuckC-axis: 0.001° resolution (positioning and milling)Turret: high-precision, 12 positions (VDI 16 or VDI 20)Motorized tools: radial and axial drilling/milling, speed 4,000 to 6,000 rpmDocumentation: completeWeight (kg): 2200Year & Manufacturer: 2007 – SPINNER Auction-ID: A1-50714-4019

Lathe Böhringer DUC 560 BJ 1995

turning diameter: 350 mmturning length: 1050 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 5400 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, testing is possible by prior arrangement.

turning diameter: 260 mmcontrol: Fanuc Oi-TC x-axis: 170 mmz-axis: 335 mm- path correction: turning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Fanuc Oi-TC12-fold revolverdriven toolsC-axischip conveyortail stockcoolant deviceTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 550 mmmax. Drehdurchmesser / max. turning diameter 260 mmX-Weg / X-travel 170 mmZ-Weg / Z-travel 335 mmmax. Stangendurchlass / max. bar diameter 51 mmDrehzahl / spindle speed 4500 UpM /rpmDrehzahl angetr. WKZ /speed of driven tools 5000 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 36 m/minEilgang Z / rapid feed Z 36 m/min.Gewicht der Maschine ca. / weight ca. 3280 kgTechnische Daten, Zubehör und Beschreibung ...

Lathe Mazak QT10B 1997

: 0460 mm: 1500 mm: : 230 mm: 78 mm: 400 mm: 2200 U/min : D1-8 DIN 55029 : 95 mm: 145 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: GILDEMEISTERModel: CTX 400 Series 2Year: 1998German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series. CNC : HEIDENHAIN TURN PLUSAxes: 2 axes (X, Z)Turning capacities:Diameter above bed: Ø 570 mmDiameter above carriage: Ø 420 mmX-axis stroke: 220 mmZ-axis stroke: 635 mmSpindle:Bore: 79 mmChuck diameter: Ø 250 mmSpindle speed: 25 – 5000 rpmMotor power: 21 kWFast feeds:X-axis: 20 m/minZ-axis: 24 m/minTurret: 12 positions VDI 30Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collectorCountry of origin: GermanyCondition: used Auction-ID: A1-50714-4035

The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of  ...

turning diameter: 320 mmturning length: 305 mmcontrol: Fanuc total power requirement: kWweight of the machine ca.: 3500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of Make: 2017 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret: V12 (all places driven) Equipment: - Chip conveyors - Touchsetter - 3-jaw chuck - Tailstock

turning diameter: 385 mmmax. turning diameter: 620 mmturning length: 958 mmcontrol: MSD 501 II Mori Seikigreates pass round over bed: 710 mmSwing dia. over traverse guideway: 738 mmcentre distance: 1.125 mmMain spindle:: turning speed range - main spindle: 10 - 1.600 min/-1power capacity - main spindel: 30 / 22 kWspindle bearing diameter: 180 mmspindle bore: 130 mmspindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mmz-axis: 995 mmturret:: number of toolpositions: 12 pos.Shank height for square tool: 32 mmDrill shank diameter: max. 60 mmturret change time: 0,4 sec.Tailstock:: tailstock adjustment: 850 mmdia. of quill: 110 mmtaper of center: MK 5 quill stroke: 150 mmfeeds:: rapid traverse: X: 20 / Z: 24 m/minTipp feed: 0 - 1.260 mm/mintotal power requirement: 64 kVAweight of the machine ca.: 11,5 tdimensions of the machine ca.: 5,0 x 2,5 x 2,5 mDocuments: Chip conveyor: Tail ...

Control Fanuc ... 0i - TD Turning diameter ... 500mm Turning length ... 1090mm Inclined bed Spindle bore ... 86mm Number of tools (driven tools) ... 12/12 Axis X ... 300mm Axis Z ... 1200mm Spindle speed ... 10-3500 rpm Axis C ... 0,001° Main engine power ... 15/18.5kW Machine weight ... 6000kg L x W x H ... 4483x1800x1830mm

turning diameter: 620 mmturning length: 2000 mmcontrol: MSX 501 total power requirement: 30 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EMCO Hyperturn 45 - CNC lathe - Main spindle equipped with full-clamping cylinder (operation with bar feeder not possible or loading and unloading via automatic. Swivel loader, see video) - Year of construction 2011 Technical data Working Range: - Maximum circumferential diameter over bed: 430 mm - Circumferential diameter over face slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar passage: 45 mm - Distance main spindle - counter spindle (spindle lugs): 720 mm Carriage travel range: - Carriage travel X / X2: 160 / 150 mm - Carriage travel Z / Z2 / Z3: 510 / 510 / 510 mm Main spindle (spindle 1): - Spindle connection - DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (inner diameter): 85 mm - Maximum mass inertia for clamping device and workpiece: 0.08 kgm² Main spindle clamping system: - Hollow clamping cylinder ...

turning diameter over bed: - mmturning diameter over slide rest: - mmturning length: - mmtotal power requirement: - kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Circumferential diameter: 680 mm Center width: 1000 mm Speed: 2800 1/min Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-speed revolver VDM 40 - C-axis

Control: Siemens The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm.Additional technical specifications:• Swing circle diameter: max. 700 mm• Rapid traverse: 17.5 m/min• Collet chuck: ISO DIN 173E• Tool holder square: 20 x 20 mm• Tool holder round: 20/25 mm• C-axis resolution: 0.1°• tool places: 14 pieces external• Main spindle: 5, internal: 3 + 4• Driven tool stations: 2• Simultaneous machining: inside and outside• spindle power: 7,5 kW

Inv. Num. : 6136 Type: CTX alpha 500 Producer: DMG Gildemeister Created: 2008 Parameters: Control system: Siemens 840 Switch-on hours: 22803 h Hours: 11505 h Maximum turning length: 500 mm Maximum turning diameter: 200 mm Maximum turning diameter over bed: 500 mm Distance between tips: 780 mm Maximum spindle speed: 6000 1/min Maximum workpiece weight: 45 kg Weight: 4500 kg Equipment: Filtration Bar Feeder CNC Spacesaver SS 2500 (2018)

With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets.Additional technical specifications:• Max. swing circle: 360 mm• Collet chuck: ISO DIN 163 E• Tool holder square: 16 x 16 mm• Tool holder Round: 20 mm• Spindle power: 5,5 kW• Tool places in total: 7 pieces - External: 4 / Internal: 3

CNC lathe Okuma LB 4000 EX – MY C750 Control: OSP-P200L Year of Make: 2008 Turning length: 750 mm Turning diameter: 430 mm Swivel diameter over bed: Ø 670 mm Swivel diameter over slide: Ø 480 mm Speed: 42 – 4,200 rpm Tool turret V12 (all places driven) Equipment: One touch IGF Chip conveyor Touchsetter 3-jaw chuck (Kitagawa B212)

With documentation and accessories including a two-jaw chuck, diameter: 165 mm, basic tool holders, as well as a collet chuck 173E-42 B.Additional technical specifications:• max. Load: 11,0 kW• Swing diameter over bed: 510 mm• Swing diameter over cross slide: 290 mm• max. turning diameter (recommended): 170 mm• max. turning diameter (technical): 320 mm• travel of X-axis: 400 mm (160 + 15 mm)• travel of Z-axis: 330 [550] mm For further technical data, please refer to the photographed machine specification.

Control Siemens Sinumerik 840D Max. turning diameter 280 mm Max. rod passage main spindle 61 mm Turning length 490 mm Speed main/sub-spindle 4700 / 6000 min-1 12-fold revolver with applied revolver Wkz. C-axis Y-axis Parts catcher Workpiece ejector Chip conveyor Various tool holders

With technical documentation and accessories such as tool holders and a two-jaw as well as a three-jaw chuck, incl. SCHUNK clamping jaws, diameter: 165 mm.Additional technical specifications:• spindle chuck diameter: 169 mm• boring bar diameter: 25 mm• cutting feed X, Z: 0.001 - 500.000 mm/rev

Inv. Num. : 8904 Type: SB-CNC Producer: SPINNER Created: 1999 Parameters: Maximum turning length: 250 mm Maximum turning diameter: 285 mm Spindle diameter: 42 mm Maximum spindle speed: 8000 1/min Weight: 1500 kg

turning diameter over bed: 2000 mmturning diameter over slide rest: 1600 mmturning length: 10000 mmcontrol: FANUC 0i TF workpiece weight: 17 tsteady: 4 feed: 1 - 3000 mm/minmain drive: 60 kWmain spindle speeds:: 1,5 - 160 U/minbed width: 1150 mmfaceplate: 1600 mmtail stock: tailstock quill diameter: 260 mmtotal power requirement: - kWweight of the machine ca.: - tthe machine is currently being overhauled and equipped with- new electrics (Siemens, Schneider, cabinet)- CNC control FANUC 0i TF- new Fanuc motors- new hydraulic parts- complete mechanical overhaul- Ball screw (B-axis)- bed overhaul- three-track bed- Face plate with 4 jaws- 3 steady rests (2 of the steadies take 500 mm piece, and one of 700 mm)- a set of rolls, for the bigger pieces- incl 1 year warranty from overhauler on electrical and hydraulic components and 2 years on FANUC CNCThe data for this ad was created with ModulMW ...

CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF

turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc 18 iT max. bar diameter through the spindel: 65 mmnumber of controlled axis: 9 y-axis: +/- 45 mmturning speed range: 4500 U/minpower capacity: 15/11 kWrapid speed: m/minswivelling range: +/- 91 ° Gradnumber of tapers in turret head: 12/24 + 12/24 number of driven tools in turret: 2x 12 Spindel speed of driven tools: 6000 U/minSpindelpower on driven tool: 5,5/3,7 kWtail stock: Gegenspindel/ sub spindle sup spindle: 5000 U/min 11/7,5 kw dimensions: mweight of the machine ca.: 12,5 tCNC- lathe with sub spindle- 2 turrets, universal for main.- or sub- spindle- upper turret switchable- Y- axis on upper turret- both turrets with 12/24 positions- collet chucks on main- and sub spindle- chip conveyor- parts catcher typ A - few toolingsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa

turning diameter: 400 mmturning length: 549 mmcontrol: HEIDENHAIN Eltropilot swing over bed: 570 mmtravel -x axis: 220 mmtravel -z axis: 635 mmmain spindle bore: 79 mmmain spindle speed: 25 - 5000 U/minmain spindle drive: 21 kWmax. torque on the spindle: max. 240 Nm: 120 mmc-axis, speed: 100 U/minC-axis: Haltemoment 200 NmC-axis resolution: < 0,04 °sub spindle bore: 56 mmsub spindle speed: 25 - 5000 U/minsub spindle drive: 9 kWmax. torque on the spindle: max. 72 Nm: 90 mmc-axis, speed: 100 U/minC-axis: Haltemoment 150 NmC-axis resolution: < 0,04 °feed power X/Z axis: 3,5 / 7 Nmrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/mintool turret: 1 x 12 Stationennumber of driven tool stations: 12 speed of driven tools: 4.000 U/mintotal power requirement: 44 kVAAccessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle,  ...

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

turning diameter: 500 mmswing dia.: 800 mmturning diameter over bed: 450 mmturning length: 800 mmx-travel: 360 mmz-travel: 980 mmspindle turning speed range: 3200 U/minmax. torque on the spindle: 235/939 Nmspindle bore: 110 mmturret (x-stations): 12 control: Fanuc 31i tailstock quill taper MT: 4 total power requirement: 30 kWweight of the machine ca.: 7,6 tdimensions of the machine ca.: LBH 4,2 x 1,98 x 2,1 m- Machine with C-axis and driven tools- 2 driven tool holders- 10 static tool holders- Incl. SMW 3-jaw chuck 315BB- Measuring arm- Chip conveyor- Incl. additional high-pressure pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEXPOL TUB 830 C CNC lathe was built in 2007 in Germany by MEXPOL Werkzeugmaschinen GmbH. The machine, with its extensive machining capabilities, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 830 mm are machined inside a large workspace by means of components characterised by the best technical parameters. In order to achieve excellent feed dynamics and repeatability, the X and Z axes are driven by powerful drives of the renowned SIEMENS company. The rigid design of the TUB 830 C x 2250, in turn, eliminates any vibration and oscillation, guaranteeing maximum process stability during even the most intense challenges. The MEXPOL TUB 830C CNC lathe is offered with a wide range of equipment, including an advanced SIEMENS CNC control and a MULTIFIX toolpost. The total weight of the machine is 4930 kg. Technical specifications of the MEXPO ...

turning diameter: 900 mmturning length: 1600 mmcontrol: Fanuc 21iTB swing dia.: 1030 mmswing diameter over cross slide guide: 800 mmx-travel: 470 mmz-axis: 1650 mmspindle motor: 37/45 kWspindle turning speed range: 0 - 1800 U/mintransmission ratio: 3 max. torque on the spindle: 5423 NmTurret positions: 12 tailstock quill taper MT: MT6 tailstock quill diameter: 160 mmtailstock quill stroke: 150 mmchucking diameter: 530 mmtotal power requirement: 68,6 kVAweight of the machine ca.: 16,5 tdimensions of the machine ca.: 5,8 x 2,8 x 2,6 m- CNC Control Fanuc 21i-TB- LNS- C-axis 360° (0,001°)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Pinacho smart turn 6 BJ 2006

x-travel: 150 mmy-travel: +/- 30 mmz-travel: 620 mmchucking diameter: 165 mmMain Spindle:: spindle speed:: 6000 U/minspindle motor: 11 / 7,5 kW2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWTurret: 3x 15 Stckc-axis: 0,0001 °y-axis: +/- 25 mmControl: 32i-TB Rapid Travel X / Y / Z-Achse: 24 / 12 / 40 m/mintotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: 4120×2130×2815 mHorizontal lathe with main and counter spindles- Muratec Fanuc 32i-TB CNC control- Main and counter spindles-- 2x C-axis- Tool turret (3x) with Y-axis,-- 15 stations each (BMT 44)-- Powered tools on all stations, 8 kW, 6,000 rpm- Finished part gripper- Conveyor belt- Bar feeder interface- Coolant system, separate 200-litre tank- Cooling unit- High pressure to turrets 1–3 via M-function: 15 bar/40 l/min- Chip conveyor- TransformerOnly approx. 500  ...