CNC Turning Centers used for sale (173)

CNC Control: Mitsubishi M-720BM(MAPPS 3) Upper turret Tool holder: 12 Main spindle Max. spindle speed rpm: 4000 Spindle drive power kW: 18.5/15 Spindle bore mm: 91 Manufacturer: KITAGAWA Sub-spindle Spindle motor: 6000 Spindle drive power kW: 11/7.5 Spindle bore mm: 43 Manufacturer: KITAGAWA Equipment Conveyor Signal lamp Tool measuring arm High Pressure Pump Workspace light Common Variables for Custom Macros (100) Year of construction: 2011

x-axis: 675 mmz-axis: 1530 mmy-axis: 300 mmcontrol: CELOS ERGOline turning speed range - main spindle: 4000 min/-1spindle passage: 91 mmspindle motor: 18,5 / 15 kWspeed range - counter spindle: 4000 min/-1: 76 tool length - max.: 400 mmtool diameter: 130 mmno. of tools in turret 1: 12 milling head speed: 12000 U/minmilling spindle - taper: Capto C6 milling spindle drive: 22 kWtotal power requirement: 88 kVAtotal wight: 18,2 tdimensions of the machine ca.: - mEquipped with:- CELOS ERGOline CNC control- Main and counter spindle with 4000 rpm, 91 mm passage- Kitagawa 304 mm chuck- Milling spindle with Capto C6 and 12,000 rpm, 22 kW- 76-position tool changer- Counter spindle with tailstock function- Manual tool presetter- High-pressure coolant system / IKZ 70 bar- Coolant gun- Chip conveyor- Oil skimmer- Oil separator- RenishawPower On: 17700h, Machining: 7200hThe data for this ad was create ...

Key data: 610 mm, 1540 mm

Stock number: 3998 CNC LATHE Manufacturer: MORI SEIKI , Type: NTX 2000 / 1500 SZ MAPPS-IV CNC Year of Make: 2013 Specifications: Max. circumferential diameter 610 mm dia. Turning length 1540 mm Main spindle 4000 RPM - 26 kw Hole through drawing pipe 80 mm dia. Spindle bore 91 mm dia. C axis - head spindle movement 0.001 degrees X axis movement 675 mm Z ash movement 1562 mm Y axis +/- 125 mm mm B axis movement 120 degree - 0.0001 degree B axis spindle speed 12000 rpm B axis spindle effect 18.5 Sub-spindle 5000 RPM - 22 Kw Control MAPPS IV (MX711 ) 5 axis Fabr. Accessories: ATC Tool magazine with 76 stations Hydr. Chuck main spindle Kitagawa BB-210 - 250 mm/dia mm dia Hydr. Chuck Subspindle Kitagawa BB-208 - 200 mm/dia mm dia Car Door Chip conveyance. High pressure coolant pump 70 ba ...

turning diameter: 190 mmturning length: 620 mmcontrol: Fanuc Series 18i-TB total power requirement: 15 kWweight of the machine ca.: 13,5 tdimensions of the machine ca.: 5350X3350x2395 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GILDEMEISTER CTX 400E CNC turning center was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine, designed for machining workpieces with a maximum diameter of 570 mm, is distinguished by its high precision and reliability. The large working area is equipped with a 12-position turret and a spindle, whose high-powered motor allows all modern cutting tools to be fully utilised. The CTX 400E CNC lathe weighs approximately 5300 kg. Technical specifications of the GILDEMEISTER CTX 400E metal lathe - maximum turning diameter: 440 mm - maximum turning diameter over bed: 570 mm - maximum turning diameter over slide: 420 mm - maximum turning length: 635 mm - distance between centers: 700 mm - feed in the X/Z axis: 220/635 mm - maximum spindle rotational speed: 5000 rpm - spindle bore diameter: 79 mm - spindle drive power: 21 kW - 12-position turret - number of ro ...

turning diameter: 320 / 270 mmworkpiece length - max.: 620 mmcontrol: Mazatrol Smooth swing diameter: 300 / 172 mmworkpiece weight: kg------------ MAIN SPINDLE ------------: turning speeds: 5000 U/minpassage of spindle: 76 mmc-axis: 0,0001 spindle motor: 15 / 11 kWspindle nose: A2-6 travel -x axis: 175 / 111 mmtravel -y axis: 100 / 70 mmtravel -z axis: 520 / 580 mmrapid travel x/y/z: 30 / 26 / 40 m/min2nd Spindle:: spindle turning speed range: 6000 U/minspindle motor: 11 / 7,5 kWspindle nose: A2-5 spindle passage: 61 mmw-axis: 625 mmbar capacity: 65 mmtotal power requirement: 39,2 kVAweight of the machine ca.: 9,1 tdimensions of the machine ca.: 2,87 x 2,3 x 2,4 mHighly efficient CNC turning centre with 2 turrets / 2 spindles for driven tools and long Y-axis travel- Smooth CNC control- Main & counter spindle- 2 tool turrets-- 12-station tool turret (2x)-- Spindle for rotary tool: spi ...

Key data: 500 mm, 744 mm

CNC turning-milling center with swivel spindle With this equipment, hardly anything is left to be desired Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens 840 Year of manufacture : 2006 Duty cycle hours : 56000 h Spindle hours : 22722 h Availability : from stock Hultsfred / Sweden , to be visited under power Video : ww.youtu.be/Mgqd\_Lq2ciM?si=eO0RL1\_Bq2Wie-h4 Specifications Working range circulating diameter over bed : 600 mm Circumferential diameter over face slide : 500 mm Distance between the two spindle lugs : 975 mm Max. turning diameter :430 mm Max. part length : 744 mm Max. rod diameter : 65 (76.2) mm Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Drive power main sp ...

turning length: 1.300 mmspindle diameter: 120 mmspindle bore: 38 mmcontrol: SIEMENS - 840 D numbers of positions in the tool changer: 12 tool taper: VDI 30 CNC Turning- and Milling Center | NILES-SIMMONS - N10 equipped with Y-axis, turret for driven tools, steady rest, and tailstock.The machine is in well-maintained condition.For further technical details, please refer to the attached offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-10 | N 10 | N10/2 | N10-2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 310 mm, 520 mm

Type of machine : CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of manufacture 2007 Control system Sinumerik 840 T Siemens Storage location : Hultfred / Sweden Switch-on hours : 46,000 h Automatic operation : 25,500 h Country of origin: Austria Delivery time end of May 2024 Cargo base free truck loaded Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-Axis : 360° Max. swing diameter over bed : 540 mm Max. swing diameter over face slide: 360 mm Max. turning diameter : 310 mm Max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main spindle: Speed range - main spindle 60 - 4,200 rpm/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001 ° Tool turret: 12 positions Tool holder VDI 30 DIN 69880  ...

greates pass round over bed: 960 mmswing diameter over bed slide: o: 860 / u: 730 mmturning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mmCNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000equipped with a turret for driven tools as well as tailstock.The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NEF 400 CNC turning center was built in 2009 in Poland by FAMOT Pleszew S.A. The machine, distinguished by its compact design and high efficiency, is used for precision machining of workpieces with a maximum diameter of 350 mm. The machining process is performed inside a fully illuminated workspace by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. The extremely rigid design eliminates any vibration and oscillation, ensuring maximum process stability during even the most intense challenges. All these features make the DMG NEF 400 the best choice for any industrial plant. The GILDEMEISTER NEF 400 CNC lathe was used for prototyping and worked for a total of 6492 hours. The offer also includes extensive equipment, consisting of, among others, an advanced HEIDENHAIN CNC control, driven tools and a chip conveyor. Technical specificatio ...

turning length: 3.000 mmgreates pass round over bed: 810 - 760 mmswing diameter over slide rest: 740 mmcontrol: SIEMENS - 840 C max. turning diameter: 800 mmturning diameter over slide: 740 mmtravel -x2 axis: 875 mmtravel -z2 axis: 3.700 mmCNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000equipped with a well as travelling lynette and tailstock.Additional equipment:- Centering points,- Jaw sets,- Clamping jaws,The machine is in a well-maintained condition andcan be inspected at any time under power.Please refer to further technical details in the attachement of the offer.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: N-40 | N 40 | N40MC3000 | N40MCThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

turning diameter: 750 mmturning length: 1520 mmcontrol: FANUC 18i TB turning diameter over slide: 540 mmchucking diameter: 8 spindle nose: A2 #6 spindle passage: 76 mmspindle turning speed - stepless: 5000 U/minspindle drive: 22/18,5 kWmilling spindle: milling spindle drive: 18,5 /15 kWmilling head speed: 12000 U/minx-axis: 565 mmz-axis: 1550 mmy-axis: +/- 85 mmb-axis: 0,001 °total power requirement: 56,7 kVAweight of the machine ca.: 13,8 tdimensions of the machine ca.: 5,9 x 2,5 x 2,8 mEquipped with:- FANUC Series 18i TB CNC control- Main & counter spindle- IKZ 20 bar- Tool magazine with 40 spaces- 3-jaw chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mmswing over bed: 900 mmturning length: 3065 mmc-axis: indexing: 0.001 °turning speeds: -2500 U/mintool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mmrapid traverse X-axis: 40 m/minrapid traverse Z-axis: 30 m/minOverall size: 4450x2100x2350 mmrapid traverse Z-axis: m/minweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm

Lathe CNC turning center with 2 spindles Emco Hyperturn 45 Year of manufacture 2018 Switch-on hours: 25,386 h Ready for operation (automatic mode): 17,035 h Production operation: 8,619 h Original price: 270.000,- € net Current leasing rate: 2,629 € Chip conveyor Bürener SPE 63/12-225 Year of construction 2018 Bar loading magazine TOP Automazioni ETL8-50 12-speed tool turret Powered tools on both turrets Y-axis Automation with EMCO bar feeders, swivel loaders or gantry loaders EMCONNECT - Digital Process Assistant (Sinumerik ONE) WORKSPACE Travel in X/Y/Z 160 (150)/70/510 mm Max. bar passage 45 (51) mm Max. turning diameter 300 mm Circumferential diameter over bed 430 mm Rapid traverse speed X/Y/Z 30/15/45 m/min MAIN SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. torque 100 Nm SUB-SPINDLE Max. speed 7000 rpm Max. drive power 15 kW Max. t ...

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

Mazak Integrex 200 Y, 20 tool positions, x,y,z = 530,140,1065. 30 kW spindle motor, 35-4500 rpm, chuck size 210 mm, through-hole diameter 61 mm, under power

turning diameter: 500 mmturning length: 1000 mmcontrol: Mazatrol Smooth G number of spindle speeds: 5000 U/minspindle motor: 11/7,5 kWaxis stroke (X,Y,Z): 450, 200, 960 mmtravel -w axis: 950 mmb-axis: -30 / +210 °c-axis: 360, 0,0001 °bar material dia.: 65 mmmilling spindle: spindle bore: 76 mmspindle turning speed range: 12000 U/minspindle motor: 7,5 / 5,5 kWtool taper: HSK A 63 rapid travel x/y/z: 40000 mm/minweight of the machine ca.: 9.5 tdimensions of the machine ca.: 3900 x 2600 x 2400 mmequipped with:- CNC control Mazak Smooth G- Main and counter spindle- milling spindle- Y-axis- Tool holder: HSK A 63- Tool magazine: 72 places- Tool Eye- Mazak monitoring system B (RMP 60)- Coolant and compressed air (1.5 MPA)- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical details shown on picture. Parts shown by hand not come.

turning diameter: 545 mmturning length: 753 mmcontrol: Mazatrol Matrix 2 Main Spindle:: c-axis: 0,0001 °spindle motor: 11 kWspindle turning speed range: 6000 U/minx-axis: 410 mmz-axis: 805 mmy-axis: 140 mmw-axis: 903 mmb-axis: 225 °bar material dia.: 61 mmRapid Travel X / Y / Z-Achse: 30/26/30 m/min2nd Spindle:: c-axis: 0,0001 °power capacity: 11 kWspindle turning speed range: 5000 U/minmilling spindle: spindle turning speed range: 12000 U/minspindle motor: 5,5 kWtotal power requirement: 45,6 kVAweight of the machine ca.: 7,7 tdimensions of the machine ca.: 3,1 x 2,495 x 2,5 m5-axis simultaneous machining- CNC control Mazatrol Matrix 2- Main & counter spindle- 9-position tool turret- Tool changer (20-fold)- Capto C6 milling spindle- Coolant system IKZ 20bar- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system

turning diameter: 658 mmworkpiece length - max.: 1519 mmcontrol: Mazatrol Matrix 2 swing diameter: 658 mmclamping range for bar work: 102 mmworkpiece weight: 1000 kg------------ MAIN SPINDLE ------------: turning speeds: 35 - 3300 U/minpassage of spindle: 112 mmc-axis: 0,0001 spindle motor: 30/22 kWspindle nose: A2-8 milling spindle: spindle motor: 22 / 15 kWmilling head speed: 12000 U/minb-axis: -30 / +210 °travel -x axis: 615 mmtravel -y axis: 260 mmtravel -z axis: 1585 mmrapid travel x/y/z: 50 / 40 / 50 m/min2nd Spindle:: spindle turning speed range: 4000 U/minspindle motor: 26 / 22 kWspindle nose: A2-8 spindle passage: 91 mmw-axis: 1539 mmtotal power requirement: 108,53 kVAweight of the machine ca.: 18 tdimensions of the machine ca.: 5,2 x 2,8 x 2,75 m- CNC control Mazatrol Matrix 2- Main & counter spindle- Milling spindle (Capto C6)- 36-position tool changer- IKZ 70 bar- Tool  ...

DMG MORI CTX Beta 2000 CNC turning center was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarantees the achievement of high repeatability of the manufactured parts. Thanks to additional function packages, it is possible to perform, e.g. precise gear milling or polygon turning. All machining processes are performed inside a large working area by means of a reliable spindle and cutting tools taken from a 12-position turret. The tailstock coupled to the Z-axis moves collision-free on separate sliding guides, mounted on a bed of high thermal stability. This bed is excellent at reducing the influence of heat, while increasing the life of all components and tools. Over its service life, the machine has worked for a total of 6219 hours. ...

CNC lathe Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T ASA 5 Main spindle power 15 Kw Self-centering diameter 175 mm ASA 5 spindle connection Bar passage 52 mm Turning diameter 230 mm Turning length 500 mm Number of revolutions 5000 Number Tool holder turrets1 Number of tool places first turret 12 Number of motorized first turret 12 First turret tool attachment typeVDI 30 X Axis Travel 160 mm Y Axis travel + - 32 mm Z Axis travel 550 mm Linear axis rapid feeds X Y Z30 m/min Counter spindle yes ASA 5 spindle nose Number of counter spindle revolutions 5000 Power sub spindle 9 Kw Spindle Hole 30 mm Model and brand of bar loader LNS single bar tube Belt chip conveyor Presetting yes 2000 The machine can be seen under power in our warehouse in Gussago BS. Mimu machine tools

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

CNC Lathe - twin turret - subspindle Y axis NAKAMURA WTS150, CNC Fanuc, Series 16i-T, Spindle - Subspindle, 3x turrets, live tools + 2 Y axis (milling), 2x C-axis, Conveyor, LNS bar loader (short bars) Mimu machine tools Italy, Standard pressure pumps – qty 2, 40‑bar high‑pressure pumps with switch to direct high pressure to the three turrets, Short bar loader, Quick Load Servo III model, Standard Nakamura toolholder kit / 2 + 2 driven toolholders, Polygon turning option on control; part ejection from sub‑spindle with modification for maximum part length 160 mm, No. 1 external belt for finished parts

Ergomat TNG 32 + LNS Sprint 552 - Turning Center + Bar Feeder - FANUC 0i-TF CNC control - 60° inclined bed - Cross slides with linear guides - Parts separators - Coolant device -Conveyor - Switch-on time: 645 hours - Processing time: 390 hours - Year of construction 2022 LNS Sprint 552 - Bar Feeder - Rod Ø: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar passage Ø: 32 mm - Spindle speed max.: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Workspace: - Workpiece Ø/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank Ø: 20 mm - Tool holder 4-point: 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Po ...

control: MAZAK Mazatrol 640T Nexus swing over bed: 610 mmswing diameter over bed slide: 350 mmturning length: 982 mmc-axis: indexing: 0.001 °turning speeds: 4000 U/mintool taper: ASA A2-8 tailstock quill taper MT: 5 rapid traverse X-axis: 30 m/minrapid traverse Z-axis: 33 m/minOverall size: 4500 x 2000 x 1600 mmweight of the machine ca.: 6.5 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

12 position upper turret (6 are driven) -10 positionlower turret (5 are driven) - sub spindle - 2 x C axis - equipped with Lns Sprint S2 bar loader with front magazine, fixed and driven tool holders, manuals - Fanuc 18T Control

turning diameter: 225 mmturning length: 656 mmcontrol: FANUC 31i B-NT-SmartX spindle turning speed range: 4500 + 6000 U/minturret head: 2x 24 12 angetriebenDimensions (L/W/H): 3500 x 3500 x 2800 mmweight of the machine ca.: 10 tY- & B- axesMisc. accessoriesmore details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bar capacity 90 mm - 2x12 driven positions turrets - Y axis in upper turret - tail stock - very very well equipped ( 36 driven + 39 fixed tool holders - 30 collets etc.etc.) - Lns Sprint S2 barfeed with front magazine - Siemens 840D Power Line Control - IN PERFECT CONDITION

control: FANUC TXP-200 FA turning diameter: 360 mmswing over bed: 600 mmswing diameter over bed slide: 450 mmturning length: 683 mmc-axis: indexing: 0.001 °turning speeds: -3000 U/mintool taper: VDI 40 Top turret tool hodler:: 12 tailstock quill taper MT: 5 quill travel: 100 mmfeed: 1-10 m/minrapid traverse X-axis: 20 m/minrapid traverse Z-axis: 24 m/minOverall size: 4450x2100x2350 mmweight of the machine ca.: 7200 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

turning diameter: 16 mmworkpiece length - max.: 145 mmmain spindle speeds:: 15000 rpm control: SIEMENS 840 DSL weight of the machine ca.: 2.6 tdimensions of the machine ca.: 2.2 x 1.5 x2.0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never put into production., - Control Options, - Options package, - High-pressure coolant flow, - Accessory package

Control: OSP-P 300S-H Travel: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Mount: HSK 63 Total tool positions: 40 Accessories: XA and YA axis with direct absolute measuring system (Okuma ABSO-Scale) In-Process Measuring with Renishaw X/Z Axis Probes Measurement in Y-axis incl. measurement in oblique axis mode KitagawaB215A11 max. 2,800 rpm KitagawaB210A8 max. 4,200 rpm Hollow Clamping Cylinder Kitagawa F 2596-H01 Ø96 mm One-Touch IGF Software Multi-Tool Harmonic speed oscillation Software package simultaneous 5-axis machining Conveyor Coolant tank with high-pressure pump 70bar

3 slides 3 revolvers with 12 positions each driven main and subspindle 2 C-axis Y axis, workpiece unloading device, high pressure coolant system with paper filter chip conveyor, Control: Fanuc 310i, Country of origin: Italy, Operating hours: 34.000 | 22.900, Number of spindles: 2, Number of linear axis + C axis: 8+2, Max bar diameter [mm]: 65, Spindle speed [rpm]: 5.000, Spindle motor [kW]: 20, Auto bar loader: Iemca Master 880 P/R, Machine weight approx. [kg]: 9.000

BIGLIA B658/B CNC turning center was built in 2009 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for machining workpieces with a maximum diameter of 380 mm, offers excellent precision and repeatability of the produced parts. The machining process is performed inside a large workspace which includes, among others, a powerful spindle, a 12-position turret and an automatic tailstock. All parameters are, in turn, entered in an intuitive FANUC CNC control with many useful functions. The BIGLIA B 658/B CNC lathe weighs 5700 kg. Technical specifications of the BIGLIA B658/B lathe - CNC controller: FANUC Series 21i-TB - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000  ...

swing diameter: 640 mmmax. turning passage: 640 mmcontrol: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - -bar material dia.: 65 mmchuck diameter: 200 - 315 mmspindle bore diameter: 80 mmdiam. of main spindle in forward position: 120 mm--- Subspindle ---: - - - - - -bar material dia.: 65 mmchuck diameter: 315 mmspindle bore diameter: 80 mmforward bearing diameter: 120 mm- - - - - General data - - - - -: - - - - - -spindle distance: 1.500 mmturning length: 1.185 mmMain-/Counter -spindle turning speeds: 5.000 U/mindriven tools turning speeds: 12.000 U/minSlide cross: X1, Y1: 550 / 180 mmSlide cross: Z1: 1.185 mmSlide cross: B1: 240 °Slide cross: X2: 180 mmSlide cross: Z2: 1.050 mmSlide cross: Z3: 1.150 mmCNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and  ...

BIGLIA B658 CNC turning center was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for precision machining of workpieces with a maximum diameter of 380 mm, has, among others, a 12-position turret, a reliable spindle and an automatic tailstock. All process parameters, in turn, are programmed in an intuitive FANUC CNC control with many useful functions that facilitate the daily operation of the machine. The BIGLIA B 658 CNC lathe weighs 6000 kg. Technical specifications of the BIGLIA B658 lathe - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 rpm - spindle bore diameter: 90 mm - spindle centre height: 1055 mm - front bearing inner diameter: 130 mm ...

turning diameter: max. 420 mmturning length: 1250 mmcontrol: INDEX, C 200-4 D swing diameter: 630 mmtravel x1: 320 mmtravel z1: 1250 mmtravel x2: 170 mmtravel z2: 1250 mmtravel x3: 320 mmtravel z3: 1250 mmmain spindle speed: max. 3000 U/minmain spindle drive: 53 kWspindle passage: 102 mmspindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nmsub spindle - spindle speed range: max. 3000 U/minsub spindle drive: 53 kWsub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nmtravel sub spindle: 1250 mmfeed power: X1 14000/Z1 14000 Nrapid traverse: X1 20/Z1 40 m/minfeed power: X2 8600/Z2 14000 Nrapid traverse: X2 20/Z2 40 m/minfeed power: X3 14000/Z3 14000 Nrapid traverse: X3 20/Z3 40 m/minnumbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head positions: Rev. 3 = 12 n ...

YOM: 2003 CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 Rapid traverse m/min: 50 B-axis degrees: 360º (0.001º index) Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1.000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 14000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High pressure pump Internal coolant supply

bar material dia.: 75 mmmax. max. swing dia.: 540 mmturning length: 650 mmcontrol: FANUC Oi-TB machine weight ab.: 6.200 kgCNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Yequipped with chip conveyor.Additional equipment:+ C axis+ Y axis+ driven toolsThe machine is in good condition.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF YThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 190 mm

Stock No: 3764 CNC LATHE Manufacturer: Mori Seiki, Type: ZT 1000Y Machine NO.: ZT101CB0056, Year of manufacture: 2003 Specifications: Max. circumferential diameter 190 mm dia. Max. turn. About BED 250 mm DIA. Main motor power 22/18.5 kw Main spindle speed range 6000 rpm Hole through drawing tube 46 mm dia. C axles 0.001 Y axis 40+/- mm Z Aksen Rapid Traverse 1/2 - 24 m/min Tool turret 1 with 16 stations Motor power driven tools 5.5 / 3.7 / 2.2 kW Kw Tool turret 2 with 16 stations Powered tools. 6000 rpm Sub-spindle Sub-spindle speeds 6000 rpm Control MSX-501 Fabr. Power on 15088 hours Operating hours spindle 5080 hours Controlled in 5+2 axes Accessories: Load and Unload device Hydr. Chuck main spindle 169 mm dia Hydr. Chuck Subspindle 169 mm dia Tool setter  ...

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Control Siemens Sinumerik 840D Bar passage 65 mm Speeds 5,000 min-1 2 x 12-speed revolver with attached revolver Competition. Turret 1 with Y-axis Parts collection facility Belt filter system Conveyor Bar loading magazine IRCO Profimat

CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T, Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower), 2x C-Axis, Swarf conveyor, IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy