basic foodstuffs and animal feeds machines used for sale (675)

Used Tetra Therm Aseptic VTIS Plant Complete aseptic processing system designed for the sterilization and treatment of liquid dairy products. This Tetra Therm Aseptic VTIS plant is suitable for processing UHT milk and other high-viscosity products, offering reliable and efficient performance for industrial dairy production. Line Configuration The plant consists of the following main components: - Used Tetra Pak Sterilizer / UHT System - Used Tetra Pak Homogenizer - Tetra Pak Sterilizer / UHT - High-performance aseptic sterilization system for continuous processing of dairy products. Technical Details - Manufacturer: Tetra Pak - Model: Tetra Therm Aseptic VTIS F-12 - Year of Manufacture: 2010 - Capacity: 8,000 l/h - Running Hours: 15,284 Suitable Products - White UHT milk - Cream - High-viscosity dairy products Condition - Very good used condition Tetra P ...

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm), More photos and full specifications: stcfoodsolutions.nl/en/machine/2022-niro-tech-rx-150-paddle-mixer/

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

Nauta Mixer MBX-6R All parts that come into contact with the product are made of stainless steel Swivel arm; Stainless steel Mixing screw; Stainless steel Container; Stainless steel universal joint; Stainless steel Condition: The mixer is not overhauled. We can also offer you a complete overhaul. A viewing is possible at any time.

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel

Poly-clip System GmbH & Co. KG mobile clipper, type: FCA 100, number: 275, year of construction: 2022, 400 V, 3 Ph, 50/60 Hz, 16 A, 3.0 kW, 5-7 bar, weight: 550 kg, plastic outfeed belt, belt width: (2x) 75 mm, total dimensions: 1700 mm x 1200 mm x 2000 mm.

Handtmann vacuum filling machine with lifter for 200 liter meat bin, type: VF 830, serial number: 43287, year of construction: 2019, 200/575 V, 50/60 Hz, 7.2/17.3 A, 6 kW, Busch vacuum pump, dimensions: 2200 mm x 1500 mm x 2150 mm. Including crate with parts. Completely overhauled in August 2026 by Kalteks.

Handtmann vacuum filling machine with linking attachment, type: VF 608, serial number: 37275, year of construction: 2016, 400 V, 3 Ph, 50 Hz, 4.3 A, 3 kW, Busch vacuum pump, type: KC 0016 E 3Z0, serial number: D15442409, year of construction: 2016, capacity: 19 m³ per hour, linking attachment, type: 410/16001852, year of construction: 2012, dimensions: 850 mm x 900 mm x 1800 mm. Technical inspection in August 2026 by Kalteks.

Handtmann mobile linking- and hanging line, type linking machine: 226-01, number: 340, year of construction: 2006, 400 V, 3 Ph, 50 Hz, 9 A, 5 kW, dimensions: 1600 mm x 850 mm x 1300 mm, type hanging line: 242-16, number: 710, year of construction: 2006, dimensions: 2650 mm x 700 mm x 1400 mm.

Poly-clip System GmbH & Co. Kg mobile double clipper, type: FCA 120, serial number: 1042, year of construction: 2018, 400 V, 3 Ph, 50/60 Hz, 6.0 A, 4.0 kW, plastic outfeed belt, belt width: (2x) 75 mm, total dimensions: 1500 mm x 1250 mm x 2000 mm. Completely overhauled in August 2026 by Kalteks.

Laska Maschinenfabrik grinder, type: Mincer WW 200 2, serial number: 14547, year of construction: 2013, 400 V, 3 Ph, 50 Hz, 82 A, 43 kW, plate diameter: 200, total dimensions: 1750 mm x 1850 mm x 1850 mm. With lifter for 200 liter meat bins, type: BA 24, serial number: 16235, year of construction: 2018, lifting height: 2150 mm, total dimensions: 1050 mm x 1200 mm x 2900 mm. Including extra plates. Technical inspection in August 2026 by Kalteks.

Handtmann vacuum filling machine with lifter for 200 liters meat bin, type: VF 830, serial number: 40246, year of construction: 2017, 200/575 V, 50/60 Hz, 9.6/17.3 A, 8 kW, Busch vacuum pump, dimensions: 2200 mm x 1500 mm x 2150 mm. With spare parts.

Poly-clip System GmbH & Co. KG mobile automatic double clipper, type: FCA 160, number: 902, year of construction: 2015, weight: 625 kg, 400 V, 3 Ph, 50/60 Hz, 6.0 A, 4.0 kW, 5-7 bar, plastic belt, belt width: (2x) 75 mm, total dimensions: 1700 mm x 1200 mm x 2000 mm.

Verbufa mobile hamburger forming machine, type: 51764-A-0004, serial number: 222442, year of construction: 2015, 230 V, 50 Hz, 10 A, 4 kW, weight: 300 kg, plastic belt, belt width: 150 mm, total dimensions: 1400 mm x 700 mm x 1650 mm. Including crate with spare parts.

Stock # U2477-1 Used stainless steel sigma blade, double arm mixer by NAGEMA (Germany) type DMK 400. Working capacity 400 l, and total capacity 550 liters. Internal dimensions of stainless steel mixing chamber 885 mm wide x 1005 mm long x 660 mm deep. Mixer has a carbon steel heating/cooling jacket with a capacity of 38 liters, designed to work at a pressure up to 2,5 bar and a temperature up to 138 C deg. Jacket is equipped with an electric heating system without control panel. Stainless steel SIGMA-type agitators are belt driven by an electric motor with a power of 15 kW, 1455 rpm, 50 Hz. Tilt unloading is driven by a gearbox and an electric motor with a power of 1.1 kW. Lack of stainless steel top cover and control panel. Shipping dimensions of mixer: length 3150 mm x width 1400 mm x height 2000 mm, weight 3625 kg.

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Stock# U2452 Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen.

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Stock# UG6390 Used stainless steel ribbon mixer by Młynpol (PL) model MP-3000. Mixer has volume 3000 l. Mixing shaft has welded double ribbon, and is driven via gearbox and el motor 22 kW. Central discharge outlet with pneumatically operated slide valve. Mixer is equipped with two hi-intensity agitators/choppers, each working with rotation 920 rpm. Top open, with hinged lid. Mixer mounted on stainless steel supporting frame. Shipping dimensions: L 510 cm x W 134 cm x H 195 cm x weight approx 2700 kg. Last time machine had been working in food industry.

Stock# UG6388 Little used single screw extruder by Farmet (CZ) model FE100 WE Clever Max. Machine can reach output in range from 90-130 kg/h. Power consumption 16 kW. Includes water pump, die cutting knife, some toolings. Local control panel with plc controls. Previously tested on animal food production. Dims: L 195 cm x W 102.5 cm x H 178 cm x weight 600 kg.

For sale: Homogeniser Alva Laval SHL25 capacity 2850-7800 L/H 250 bar

Cooling aggregat ZCH -3 - NEW External dimensions: L 1300 x W 750 x H 1250 mm Weight: 190 kg Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała Identyfikator VAT: PL547-17-47-669 tel. 0048/33 812 58 60 Faksu. 0048/33 812 58 36

Stock# U2448-2 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 22kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a carbon steel feeding hopper and bottom unloading. Whole thing is mounted on a frame made of carbon steel. The set includes a spare set of milling discs and pins. Not included technical documentation.

Stock# U2448-1 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 22 kW, 2945 rpm, 380 V, 50 Hz. Machine is equipped with a carbon steel feeding hopper and bottom unloading. The set includes a stainless steel hopper tank mounted on 4 carbon steel legs and a belt conveyor with a polyurethane fabric/plastic belt with a working width of 245 mm and a length of 3800 mm, conveyor construction is made of carbon steel and mounted on legs. The belt is driven by a gearbox with a ratio of i=15, an ex proof electric motor with a power of 1,1 kW, 1415 rpm, 380 V, 50 Hz. Whole thing is mounted on a frame made of carbon steel. Also includes a spare set of ...

Manufacturer: BIZERBA Type: FK 23 Band Saw BIZERBA Type FK 23 Cutting and portioning of fresh meat with or without bone as well as cutting of long bones, poultry and fish Cutting height 251 mm Cutting thickness 10-190 mm Saw blade speed 17 m/sec Dustbin System for clamping and releasing the saw blade Height-adjustable saw table Protection class IP 55 Voltage 400 V 50 Hz Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Stock# U2435-1 Used stainless steel ribbon mixer made by Consumasz (Poland) type M-01 with total volume 1100 l and working volume 850 l. Mixing chamber has internal dimensions: L 1990 mm W 830 mm x D 1175 mm. Mixer is feeded from the top via cylindrical sifter type PC-400, driven by gearbox and el motor 4 kW, 1445 rpm, 220/380 V, 50 hz, or directly through inlet 205 mm x 205 mm. Mixer has single shaft equipped with welded double ribbons. Shaft is driven via gearbox and el motor 15 kW, 1460 rpm, 380 V, 50 hz. Gearbox reduction i= 36,9. Working rotation of shaft up to 39 rpm. Mixer has side wall inspection manway with dimensions 540 mm x 365 mm, and bolted stainless steel lid. Central bottom discharge outlet has diameter 200 mm and is equipped with manually operated valve. Product is droped into the hopper of discharge screw conveyor with screw diameter 200 mm and working length 1000 m ...

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.