CNC Turning Machines used for sale (531)

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

CNC Control: Fanuc 0T-F (with C Axis)Diameter Above Bed: 500 mmMax Turning Diameter: ~280 mmMax Turning Length: ~500 mmBar Capacity (Main Spindle): 65 mmBench Design: 30° or 45°Inclined Spindle Nose: ASA 6\"Main Spindle Speed: Up to 4,000 RPMSub-Spindle Speed: Up to 4,000 RPMC-Axis: 0.001°Turret: 12 stationsTooling type: VDI 40Speed motorized tools: ~3,000 - 4,000 rpmLots sold as is, unchecked, with tool and tool holder. Auction-ID: A1-44765-201

Inv. Num. : 9002 Type: LB3000EXII MYW800 Producer: OKUMA Created: 2014 Parameters: Control system: OKUMA OSP-P300L CNC Switch-on hours: 65458 h Hours: 36054 h Maximum turning length: 785 mm Max. turning diameter: 480 mm Max. turning diameter: 340 mm Spindle diameter: 80 mm Motor power: 22 kW Minimum spindle speed: 45 1/min Maximum spindle speed: 5000 1/min Travel X: 260 mm Travel Y: 115 mm Travel Z: 510 mm Tool magazine: 12 pieces Length: 3330 mm Width: 1800 mm Height: 2250 mm Weight: 5250 kg Equipment: Baking Collets Axis C Sub-spindle Powered tools OSP-P300L Advanced One Touch CF-M-E FILTERMIST FX4002 Suction High-pressure cooling Grips Tool Holder Reducer insert tube In June 2019, the spindle was repaired due to defective bearings. In June 2025, the U4 control unit was replaced. In October 2025, the M control unit w ...

CNC Control: SIEMENS 810 DNumber of axes: 3Max. turning diameter: 325 mmMax. turning length: 400 mmMax. passage over the bed: 500 mm X/Z axis strokes: 215 / 420 mmSpindle speed: 30 – 4,500 rpmSpindle bore: 52 mmSpindle power: 15 kWTurret: 12 VDI 40 positions with motorized toolsChuck: 3-jaw hydraulic Ø 204 mmTailstock: present, CM4 taperTailstock sleeve stroke: 130 mm, Ø 80 mmIncluded equipment: coolant, bar feederWeight (kg): approx. 4500Year & Manufacturer: 2000 – HYUNDAI Auction-ID: A1-44765-253

Key data: 500 mm, 100 mm, 2500 1/min

Special price to be submitted at short notice

Manufacturer: GILDEMEISTERYear: 1996Type: CNC latheNumerical control: Heidenhain ELECTRO PILOT turn plusAxes: 2 axes (X, Z)Turning diameter above the bench: Ø 500 mmTurning diameter above the carriage: Ø 290 mmMax. turning length: 640 mmSpindle: 20–5,000 rpm – 22 kW – max. torque 150 Nm – bore 72 mm – passage 65 mmStrokes: Z 650 mm / X 212 mmFast feeds X/Z: 10 m/minTailstock: sleeve Ø 80 mm – CM4 – stroke 100 mmEquipment: 3-jaw chuck Ø 250 mm, SAUTER turret 12 positions VDI 30, tailstock, full documentationDimensions: approx. 3300 × 1800 × 1900 mmWeight: approx. 5000 kgRemarks: Robust German-made CNC lathe. Auction-ID: A1-44765-225

Inv. Num. : 8996 Type: KIT 450 Producer: HYUNDAI-KIA Created: 2008 Parameters: Control System: FANUC Series Oi-TC Switch-on hours: 54066 h Hours: 23954 h Max. turning length: 190 mm Max. turning diameter: 165 mm Maximum turning diameter over bed: 530 mm Maximum length of travel in the X-axis: 400 mm Maximum feed in the Z-axis: 250 mm Spindle speeds: 6000 1/min Max. rod diameter: 44 mm Spindle diameter: 52 mm Weight: 2700 kg Equipment: Bar Feeder

Manufacturer: HARDINGEYear: 2005Type: CNC Motorized Tool Lathe with C-AxisNumerical Control: FANUC 21i-TBBar Capacity: Ø 51 mmMax. Turning Circle: Ø 310 mmMax. Turning Length: 470 mmChuck: Ø 200 mm (8\")Bed Inclination: 45°Spindle: 50–5,000 rpm – 18.5 kW (max) / 11 kW (continuous)Turret: 12 stations, all motorable positionsMotorized implements: 4,000–5,000 rpm – 3.7 kWFast feeds: X/Z 19 / 24 m/minAccuracy: ±0.005 mmIncluded equipment: Programmable C-axis (0.001°), IEMCA Boss 545 bar feederWeight (kg): approx. 4200 Auction-ID: A1-44765-272

Inv. Num. : 8995 Type: Masturn MT 550i CNC Producer: Kovosvit Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Max. turning length: 1500 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum spindle speed: 3000 1/min Spindle bore: 82 mm Weight: 3400 kg Equipment: Chip conveyor Cutter head (8 positions)

CNC Control: FANUC 18i-TNumber of Axes: 5 (Twin-Spindle Configuration)Main Spindle: PresentSub-Spindle: Turrets: 2 Turrets with MotorizedTools Configuration: Combined Turning and MillingWeight (kg): Approx. 9000Year & Manufacturer: 2004 – HARDINGE Auction-ID: A1-44765-259

Key data: 254 mm, 500 mm, 3600 1/min

Stock No.: 3967 CNC LATHE Manuf.: HYUNDAI, Type: HIT 18S Serial No.: 34156066, Build: 1998 Specifications: Max. Turning diameter 254 mm dia. Turning Length 500 mm Main motor power 15 kw Main Spindle speed Range 3600 rpm Spindle bore 75 mm dia. X Axis Stroke 180 mm Z Axis Stroke 510 mm Turret 1 with 8 Stations Control system Siemens 840C manuf. Controlled in X-Z axis Accessories: Hydr. Chuck Mainspindle mm dia Various toolposts. Chip conveyor. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

CNC Control: SIEMENS 840 DNumber of axes: 2Max. turning diameter: 420 mmMax. turning length: 1000 mmX/Z axis strokes: 200 / 1000 mmSpindle bore: 82 mmSpindle speed: 0 – 3,000 rpmSpindle motor power: 14.5 kWTurret: VDI 40, 12 stationsChuck: Autoblok Ø 250 mmTailstock: Chip Conveyor: PresentRemarks: Machine in good working order.Weight (kg): approx. 5500Year & Manufacturer: 2001 – MENTI Auction-ID: A1-44765-254

Key data: 294 mm, 481 mm, 3000 1/min

Stock number: 4005 CNC LATHE Manufacturer: Hyundai, Type: Hit-20M Machine NO.: 34508002, Specifications: Max. circumferential diameter 294 mm dia. Turning length 481 mm Main motor power 18.5/14 kw Main spindle speed range 40-4000 rpm Drilling through drawing tube 70 mm dia. C Axes Tool turret with 12 stations Powered tools. 30-3000 rpm Control Siemens Fabr. Accessories: Hydraulic Main Center Chuck Kitagawa B 210 - 250 mm mm dia. Driving angle tools 2 pieces Driving Tools Straight 2 pcs. Various tool holders. 7 pc Cooling water system. Tailstock Length: 3000 mm, Height: 1800 mm, Width: 1750 mm, Weight: 4380 kg

CNC lathe for metal part turning operations. CNC Control: Heidenhain Turn PlusAxes: 2 Axes Auction-ID: A1-44765-246

Control Fanuc 32i-B5 Rotary diameter. [mm] 552 Turning length [mm] 765 Main spindle: Motor spindle technology Speed 4,500 rpm Power (max.) 40 kW Torque (max.) 286 Nm Bar passage 70 mm Workpiece Clamping 3-Jaw Chuck, SMW Autoblok 250BB Sub-spindle: Motor spindle technology Speed 4,500 rpm Power (max.) 40 kW Torque (max.) 286 Nm Workpiece Clamping 3-Jaw Chuck, SMW Autoblok FK-N 165-46 Travel in W 895 mm Rapid traverse in B 30 m/min Tool carrier (X/Y/Z): Technology Turret with 16 stations Tool holder BMT65 Tool drive 10,000 rpm, 17.5 kW, 56 Nm Travel in X/Y/Z 305/140/860 mm Rapid traverse in X/Y/Z 18/18/30 m/min Equipment/accessories: Chip Management Chip Conveyor Coolant management IKZ pump with filter and high pressure, 20 bar Tool Measurement Automatic Measuring Arm, Renishaw RP3 Automation Gantry Loader System, Fabr. Frai Oil mist extraction interfac ...

Manufacturer: YAMAZAKI MAZAKModel: Quick Turn 20Year: 1997CNC Machine: Mazatrol T PlusAxes: 2 Axes (X, Z)Capacities:Max. diameter above bed: Ø 300 mmDistance between points: 446 mmX-axis stroke: 180 mmSpindle:Bore: 61 mmMax. speed: 4500 rpmMotor power: 15 kWTurret: 8 positionsDimensions per machine: 2660 x 1520 x 1879 mmUnit weight: approx. 4170 kg (total batch weight approx. 8340 kg)Condition: used Auction-ID: A1-44765-261

CNC lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of Make: 2021 Max. machining Ø: 390 mm Swing Ø over cross slide: 260 mm Max. turning length: 500 mm Travels: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 seats – all powered Speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyors - Touchsetter - one Touch IGF - Parts catcher - Reinforced coolant device 8bar - Suction

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmCounter-spindle power: 3.7 / 5.5 kWCounter-spindle bar passage: 42 mmC-axis: 0.001°Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500Serial No.: 1105-02957 Auction-ID: A1-44765-238

The machine is in good technical condition, after prior agreement it is possible to test it. designed for serial and piece production. It is one of the classic 2-axis CNC lathes (X, Z) with a turret head and is often used in the engineering production of smaller and medium-sized parts. Max. turning diameter: approx. 320 mm Max. turning length: approx. 500 mm Max. diameter above the bed: approx. 500 mm Max. diameter above the slide: approx. 300 mm Spindle Chuck diameter: 210 mm (8") Spindle passage: approx. 52–65 mm Spindle speed: up to 4500 rpm Main motor power: approx. 11–15 kW X-axis: approx. 200 mm Z: approx. 500 mm Rapid traverse: up to 20–24 m/min Turret head 8 or 12 tool positions, possibility of driven tools in the M version Control system Most common: Fanuc 0i-T / Fanuc 21i-T Machine weight approx. 4,000 – 5,000 kg

Manufacturer: YAMAZAKI MAZAKModel: Quick Turn 20Year: 1998Numerical Control: Mazatrol T PlusAxes: 2 Axes (X, Z)Capacities:Max. diameter above bed: Ø 300 mmDistance between points: 446 mmX-axis stroke: 180 mmSpindle:Bore: 61 mmMax. speed: 4500 rpmEngine power: 15 kWTurret: 8 positionsDimensions per machine: 2660 x 1520 x 1879 mmUnit weight: approx. 4170 kg (total batch weight approx. 8340 kg)Condition:used Lot sold as a single set (2 machines) Auction-ID: A1-44765-231

The machine is in very good technical condition, testing is possible by prior arrangement.

Manufacturer: YAMAZAKI MAZAKYear: 1994Type: CNC latheNumerical control: Mazatrol T32-2Axes: 2 axes (X, Z)Max. diameter above the bed: Ø 560 mmMax. turning diameter: Ø 410 mmMax. turning length: 1500 mmSpindle: 35–3500 rpm – main motor 22 kW – spindle nose A2-8 – bore 76 mmTurret: 12 positionsEquipment: Programmable tailstock, complete enclosureWeight: approx. 6900 kgOrigin: JapanCondition: used Auction-ID: A1-44765-230

The machine is in very good technical condition, testing is possible by prior arrangement.

Manufacturer: HYUNDAIYear: 1999Type: CNC latheCNC numerically controlled: Siemens Sinumerik 840CMax. turning circle: Ø 254 mmDiameter above bed: Ø 440 mmMax. turning length: 500 mmBar capacity: Ø 51 mmSpindle: 36–4,000 rpm – nose A2-6 – 11 kW (continuous) / 15 kW (30 min)Chuck: Ø 210 mm, Hydraulic clampingTurret: 8 stations – 25 × 25 mm tools / Ø 40 mm barsTailstock: programmable hydraulic – CM4 taperChip conveyor: hinged, side outletDimensions (mm): 2600 × 1700 × 1750Weight (kg): approx. 4200Remarks: Machine used, sold with tailstock and conveyor. Auction-ID: A1-44765-214

Lathe Böhringer DUC 560 BJ 1995

Manufacturer: GILDEMEISTERModel: CTX 400 Series 2Year: 1998German-made 2-axis CNC lathe, robust and precise, suitable for turning single parts and small to medium series.CNC : HEIDENHAIN TURN PLUSAxes: 2 axes (X, Z)Turning capacities:Diameter above bed: Ø 570 mmDiameter above carriage: Ø 420 mmX-axis stroke: 220 mmZ-axis stroke: 635 mmSpindle:Bore: 79 mmChuck diameter: Ø 250 mmSpindle speed: 25 – 5000 rpmMotor power: 21 kWFast feeds:X-axis: 20 m/minZ-axis: 24 m/minTurret: 12 positions VDI 30Equipment: automatic tailstock (Ø 80 mm), chip conveyor, parts collectorCountry of origin: GermanyCondition: used Auction-ID: A1-44765-232

The machine is in good technical condition, after prior agreement it is possible to test it. with Fanuc Oi-TC control and accessories. - maximum turning diameter: 500 mm - maximum turning length: 1200 mm - clamping head 100 mm - swing diameter over the bed: approx. 700 mm - max. spindle passage bar diameter: approx. (75-105 mm) - chuck size: 15" - LM driven tools with milling function (C axis), driven tool motor 7 hp - spindle motor 30 hp - number of tools in the turret 12 VDI - 3-jaw chuck - chip conveyor

Capabilities: Maximum turning diameter: 420 mm (standard 290 mm) Maximum turning length (Z-axis): 635 mm Bar passage: 65 mm Spindle Bore: 79 mm Spindle: Rotational speed: 25 to 5,000 rpm Power: 21 kW (100%) / 28 kW (40%) 3-jaw hydraulic chuck (Ø approx. 200–250 mm) Turret & tooling: Sauter Turret VDI 30 (DIN 69880) Capacity: 12 stations Motorized substations C-axis (pin indexing) CNC Control: Heidenhain Turn Plus Electrical data: Power supply: 400 V / 3~ / 50 Hz Installed effective power: 44 kVA Current rating: 64 A Protection: 80 A Auxiliary voltage: 230 V Control voltage: 24 V DC Auction-ID: A1-44765-262

The machine is in good technical condition, testing is possible by prior arrangement.

CNC Control: NUM Teach-InMax. diameter above the bed: 380 mmMax. diameter above the carriage: 200 mmDistance between tips: 750 mmMax. turning length: 600 mmStrokes X × Z: 180 × 610 mmSpindle type: A2-6\"Spindle power: 11 kWRotational speeds: 0–3000 rpmMax. bar diameter: 62 mmTailstock: Morse code N°4, Ø sheath 60 mm, stroke 175 mmPower supply: 400 V / 50 HzIncluded equipment: touch screen on carriage, LCD control screen, AMESTRA Ø 200 mm 3-jaw chuck, set of hard jaws, AMESTRA type B turret, 5 AMESTRA quick-change tool holders, CM4 rotating tailstock, coolant tray with automatically controlled pump, lighting, 4 feetDimensions (mm): 1950 × 1320 × 1820Weight (kg): 2000Year: 2000Manufacturer: CAZENEUVE Auction-ID: A1-44765-268

The machine is in good technical condition, after prior agreement it is possible to test it. It was put into operation in 2012 with the HEIDENHAIN iTNC 530 control system, including a chip conveyor and a cutter head (8 positions). The machine is fully functional and runs without complications, serviced regularly, originally directly by the KOVOSVIT company and after its demise by the VOPSS company.

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-44765-237

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

CNC Control: FANUC 21i-TBNumber of axes: 3 (including C-axis)Max. rotation diameter: 120 to 150 mm (depending on tooling)Max. turning length: 120 mmX/Z axis strokes: 340 / 240 mmMax. spindle speed: up to 8,000 rpmSpindle nose: designed for precision grippers or chuckC-axis: 0.001° resolution (positioning and milling)Turret: high-precision, 12 positions (VDI 16 or VDI 20)Motorized tools: radial and axial drilling/milling, speed 4,000 to 6,000 rpmDocumentation: completeWeight (kg): 2200Year & Manufacturer: 2007 – SPINNER Auction-ID: A1-44765-258

TRAUB TNS 65 D / 5 - Axis CNC Lathe -For complete technical data, see data sheets -Control TX8 D -Built in 1994 -Rod passage 65 mm -Hydraulic bar loading magazine -Various driven tool holders -Tool holder -Three-jaw chuck -Complete documentation Hebkn Auovug Uls S Tel

CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AAMax. turning diameter: 165 mmTurning length: 100 – 340 mmDiameter above bed: 220 mmMain spindle speed: 50 – 5,000 rpmMain spindle power: 5.5 / 7.5 kWMain spindle bar passing: 65 mmSub-spindle speed: 50 – 5,000 rpmSub-spindle power: 3.7 / 5.5 kWSub-spindle bar passage: 42 mmC-axis: 0.001° Turrets: 2Tool positions: 2 × 16Motorized tools: 2 × 16 positionsStrokes: X 175 mm / Z 240 – 680 mmTotal power: 41 kVADimensions (mm): 3,500 × 2,800 × 2,000Weight (kg): 5,500 Auction-ID: A1-44765-236

Key data: 250 mm, 500 mm, 3800 1/min

The machine is in good condition and fully functional. It can currently be visited under power. Included is the hydraulic three-jaw chuck, furthermore it has a hydraulic tailstock which is movable. The machine does not have a chip conveyor, but it does have a chip tray.

Auction-ID: A1-44765-402

CNC lathe DMG MORI NLX 2000 SY/500 With DMG MORI M730 UM MAPPS CELOS CONTROLLER Year of Make: 2016 Max. workpiece diameter: 366 mm Max. workpiece length: 510 mm Travel in X: 260 mm Travel in Z: 590 mm Travel in Y: +- 50 mm Spindle bore: 65 mm Main spindle speed range: 4000 rpm Speed range sub-spindle: 6000 rpm Speed range of driven tools : 10000 rpm With the following accessories: Workroom door with interior lighting 20-fold turret with 20 driven stations C Axis , Y Axis Touch Probe ( Marposs ) Sub-spindle, parts catcher Tool presetter manual ( HS ) Collet Chuck Hydraulic with Foot Pedal (HS) Collet Chuck Hydraulic with Foot Pedal (GS) Bar Feeder LNS Move S2 30 tool holders Various powered tools Direct displacement measuring system X, Y, Z axis Signal lamp 4 colours Chip conveyor Coolant Setup Operating Instructions

CNC lathe for turning and machining metal parts. CNC control: Traub TX 8Max. turning circle: 275 mmMax. turning length: 450 mmBar pass: 65 mmChuck diameter: 210 / 250 mmBench inclination: 40°Spindle speed: 0 – 4,000 rpmSpindle nose: A2-6Spindle motor power: 11 / 18.5 kWC-axis: 0.001° with hydraulic brakeTurret: 12 positions VDI 30Motorized tools: 4,000 rpm – 4.4 kWFast feeds: X 15 m/min / Z 20 m/min Auction-ID: A1-44765-241

Key data: 350 mm, 700 mm

DMG Mori NLX2500SY/700 Manufactured on 2013 and put into operation on 2014. ZAchse: 700mm, Y-axis 100mm, turning diameter approx. 350mm. Spindle passage 70mm. Operation hours 5353 hours only as new C Axis Y axis B axis 3 Powered Wkz Collets feeder extra included Measuring arm Fully equipped See pictures Immediately available

CNC control: MSX-850 IIINumber of axes: 2Strokes: X = 260 mm, Z = 590 mmSpindle speed: 50 – 5000 rpmPower: 15 kWBar capacity: Ø 65 mmSpindle bore: 73 mm Turret: 12 stations (BMT)Max turning diameter: 356 mmMax turning length: 510 mmChip conveyor: yes235L high-pressure pump: yes Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-204

Lathe Mazak QT10B 1997

CNC Control: FANUC Series 18-TNumber of axes: 3 (including C-axis)Maximum machining diameter: 200 mmDistance between tips: 300 mmMax. spindle speed: 3,000 rpmSpindle power: approx. 17.5 kWTurret: 12 fixed positions + 6 rotating positionsChuck: Ø 200 mmSpindle: direct collet mounting possibleWeight (kg): approx. 4200Year & Manufacturer: 1993 – HARDINGE Auction-ID: A1-44765-255

The machine is in good technical condition, testing is possible by prior arrangement.

Technical data Manufacturer: Colchester Model: MASCOT (Electronic Mascot) Machine Type: CNC Lathe Control: GE Fanuc Series 20-T Spindle speed: approx. 20 – 1600 rpm Spindle bore: approx. 74 – 76 mm Turning diameter over bed: approx. 430 mm Turning diameter over slide: approx. 260 – 270 mm Center width: approx. 1200 – 2500 mm Spindle motor power: up to approx. 11 kW Weight: approx. 2.2 – 3.0 t Configuration CNC control Fanuc 20-T Tool holder / turret (typical) Tailstock available Coolant Setup Closed machine enclosure Note The technical data was researched on the basis of publicly available information on the Colchester Mascot series. Original machine documentation was not available. Deviations are possible. Auction-ID: A7-45416-31

The machine is in good technical condition, testing is possible by prior arrangement.

Manufacturer: INDEXYear: 2005Type: Moving spindle CNC lathe with motorized tools and C-axisNumerical control: Siemens Sinumerik 840D PowerlineChuck: Ø 160 mmMax. rotation diameter: Ø 180 mmStrokes: X-axis 520 mm / Z-axis 200 mmFast feeds: X/Z 40 / 30 m/minMoving spindle: 5,000 rpm – 13 kW (100%) / 20 kW (40% ED) – max. torque 105 NmC-axis: 0.001° resolution Turret: 12 positions – all motorable stations – VDI 30Motorized tools: up to 6,000 rpm – 8.5 kWPower supply: 400 V / 50 Hz / 3 phases – installed power approx. 25 kWWeight (kg): approx. 4500 Auction-ID: A1-44765-273

The machine is in good technical condition, after prior agreement it is possible to test it. spindle passage 65 mm. 38444 operating hours, spindle approx. 1/3 of the machine's operating hours. Yes, it is a Sinumerik. Chuck SCHUNK ROTA THW plus 215-65

Working parameters:Max. turning diameter 325 mmMax. turning length 400 mmSpindle speed 30 – 4,500 rpmX-axis strokes 215 mm / Z-axis 420 mmEquipment included:12-station turret VDI 40Hydraulic chuck 3 jaws Ø 204 mmTailstock CM4Tool holder with motorized toolsCoolantBar loaderYear & Manufacturer: Year 2000Manufacturer HYUNDAI Auction-ID: A1-44765-266