CNC Turning Machines used for sale (532)

The machine is in good technical condition, inspection and trial operation is possible by prior arrangement. Extraction and filtration system from the company Wemac spol. s r.o. Oil mist separator FILTERMIST FX-2002, serial number 065177, motor 0.55 kW Dimensions: L 2,980 x W 1,750 x H 1,750 mm Total connected load: 22 kVA, maximum power supply 3x 380 V Control system: FANUC 21iTB Weight: 2,200 kg Videos of the machine's ongoing operation are available.

turning diameter: 390 mmturning length: 507 mmcontrol: MSG 806 MAPPSmax. turning diameter: 390 mmgreates pass round over bed: 680 mmSwing dia. over traverse guideway: 510 mmcentre distance: 618 mmMain spindle:: turning speed range - main spindle: 45 - 4.500 min/-1power capacity - main spindel: 11 / 7,5 kWspindle bearing diameter: 110 mmspindle bore: 73 mmmax. bar capacity: 51 mmspindle nose: JIS A2-6 chucking diameter: 210 mmC-Axis: 0,001 °axis stroke:: x-axis: 235 (195+40) mmz-axis: 520 mmturret:: number of toolpositions: 12 pos.Number of driven toolspositions: 12 pos.Spindle speed - driven tool stations: max. 3.000 min -1power capacity driven tool-stations: 5,9 / 4,5 kWShank height for square tool: 25 mmDrill shank diameter: max. 50 mmturret change time: 0,2 sec.Tailstock:: tailstock adjustment: 490 mmdia. of quill: 85 mmtaper of center: MT 4 quill stroke: 120 mmfeeds:: rapid tr ...

The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.

turning diameter: 200 mmturning length: 400 mmcontrol: Siemens type: C 200-4 840 Cspindle passage: 65 mmTool changer: 2 x14 Pos.Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

turning diameter: 372 mmturning length: 520 mmcontrol: Siemens 820 D inkl Operat weight of the machine ca.: 4 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens 840D Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Speed 4,500 min-1 8-speed revolver Conveyor

turn - diameter over facing slide: 450 mmturning diameter over bed: 830 mmturning diameter: mmturning length: 3000 mmcontrol: Siemens total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Machine (incl. chip conveyor): 290 x 235 cm, weight: 3500–4000 kg Transformer station: 65 x 60 cm, weight: 150 kg Max. turning length: 81.3 mm Max. turning diameter: 99.1 mm CNC control: Fanuc 21iT X-axis: 300 mm Z-axis: 240 mm Spindle holder: A2-6 Spindle bore: 33 mm Number of tools in the turret: 8 Number of driven tools: 10 Spindle speed: up to 4000 rpm Spindle motor power: 11 kW Tailstock: No Bar Feeder: No Dimensions (L x W x H): 2600 × 2300 × 2400 mm Weight: 3900 kg

turning diameter: 510 mmturning length: 1000 mmcontrol: Mazatrol type: Mazatrol T plusturning speeds: 35-3500 U/minspindle passage: 88 mmTool changer: 20 Pos.Spindle capacity: 35 KWcentre distance: 1029 mmx-travel: 450 mmz-travel: 1029 mmtotal power requirement: kWweight of the machine ca.: 7,5 torbital diameter : 510 mm- Standard machining diameter : 510 mm- Max. machining length : 1000 mm- Spindle power : 35/30 HP- Spindle Bore: 88mm- Spindle nose : A2-8- Spindle speed range: 35 - 3500 rpm- Distance between centers : 1029 mm- Axis C- X axis travel : 450 mm- Y axis Travet : +/- 90 mm- Z axis travel : 1029 mm- max feed : X = 12 m/min - Y = 10 m/min - Z = 18 m/min- Tool charger : 20 positionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

turning diameter: 330 mmturning length: 140x130 mmcontrol: turning diameter over slide: 140 mmtravel -x axis: 107 mmtravel -z axis: 230 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Accessories included.

turning diameter: 200 mmturning length: 508 mmx-axis: 176 mmz-axis: 520 mmcontrol: Fanuc-Series O-TD total power requirement: kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 2,73x1,98x1,64 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

turning diameter: 750 mmturning length: 1520 mmcontrol: Fanuc 18 iT-B total power requirement: 22,0 kWweight of the machine ca.: 15,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

"The machine is in good technical condition, a test run is possible by prior arrangement."

turning diameter: 300 mmturning length: 300 mmcontrol: Sinumerik 810D total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mCNC control Sinumerik 810D12-fold revolverbar loading device Breuning Irco Simag 42.1R (max. bar diameter 42mm)chip conveyortail stockTechnische Daten / technical details:Umlaufdurchmesser über Bett / rotary diameter over bed 550 mmmax. Drehdurchmesser / max. turning diameter 300 mmmax. Drehlänge / max. turning lenght 300 mmX-Weg / X-travel 170 mmZ-Weg / Z-travel 335 mmmax. Stangendurchlass / max. bar diameter 45 mmDrehzahl / spindle speed 6000 UpM /rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X / rapid feed X 36 m/minEilgang Z / rapid feed Z 36 m/min.Antriebsleistung / drive capacity 20 kWGewicht der Maschine ca. / weight ca. 3500 kgTechnische Da ...

The machine is in good technical condition, a test run is possible by prior arrangement. Glass lining Ø 200 mm Oil separator Filtermist S800 (2 years old) Reducer sleeves, hard and soft jaws Clamping claws Renishaw button

turning diameter: 200 mmturning length: 0,0 mmcontrol: Siemens 810 D working spindle speed range: 4200 U/mintravel -x axis: 210 mmtravel -z axis: 610 mmspindle passage: 65 mmtotal power requirement: 0,0 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Okuma OSP-P300 SA Rotary diameter. [mm] 650 Turning length [mm] 1000 Main spindle: Motor spindle technology Speed 4,200 rpm Power 22 kW Torque 427 Nm Spindle bore 91 mm Hollow clamping cylinder 86 mm C-Axis High Accuracy Package Chuck SMW KNCS-N 275-86 K8 Sub-spindle: Motor spindle technology Speed 5,000 rpm Power 22 kW Torque 420 Nm Spindle bore 80 mm Hollow clamping cylinder 77 mm C-Axis High Accuracy Package Chuck SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Milling spindle technology Speed 12,000 rpm Power 22 kW Torque 120 Nm Tool holder HSK 63 Y-axis 250 mm (+/- 125 mm) B-axis 240° Tool magazine: Number of stations 80 Equipment / Accessories: Displacement measuring systems directly in X/Y/Z axis (glass scales) Chip disposal chip conveyor Coolant supply IKZ system, 70 bar Coolant temperature control Deltatherm E4 Chip flushing work area ...

turning diameter: 235 mmturning length: 200 mmturning speeds: 6500 U/mincontrol: Siemens 840D swing diameter: mmturning height: mmworkpiece height max.: 100 mmspindle bearing diameter: 90 mmspindle head: A5 total power requirement: 41 kWweight of the machine ca.: 6500 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Lathe MAHO Graziano SPA GR 300 C Including chip conveyor Including documentation Technical data and condition see pictures

turning diameter: 350 mmturning length: 532 mmcontrol: Mazatrol Smart total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMazatrol Smart CNC control3-jaw chuckC-axisdriven tools12-fold revolverTool Eyetail stockcoolant devicechip conveyorTechnische Daten / technical details:max. Umlaufdurchmesser / max. swing diameter 660 mmmax. Drehdurchmesser/ max. turning diameter 350 mmmax. Drehlänge / max. turning length 532 mmPlanweg (x) / cross way (x) 225 mmLängsweg (z) / longitudinal way (z) 560 mmDrehzahlbereich / spindle speed 5000 UpM /rpmDrehzahl angetriebene Werkzeuge / speed of driven tools 4500 UpM / rpmWerkzeugrevolver / turret head 12 fach /holesEilgang X/Z / rapid feed X/Z 30/33 m/minAntriebsleistung Spindel / drive capacity spindle 15 kWGewicht der Maschine ca. / weight 4500 kgT ...

CNC Turning lathe LEADWELL T-6

turning diameter: 520 mmturning length: 1500 mmcontrol: Fagor total power requirement: 15 kWweight of the machine ca.: ca. 3,5 tdimensions of the machine ca.: L/B/H 3,50x1,50x180 mmore info to follow The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 380 mm, 575 mm, 5000 1/min

Smooth G control Travel X/Y/Z/W 230/100/625/575 mm Main spindle Max. speed 5,000 rpm Main spindle spindle nose A2-6 Sub-spindle Max. speed 6,000 rpm Sub-spindle spindle nose A2-5 16-cavity tool turret, VDI 16 driven tool stations 5.5 kW Max. speed ang. Tools: 5,000 rpm Toolsetter Parts catcher Full C-axis on main and counter spindle Cylinder interpolation Synch. Tapping Preparation Renishaw OMP Conveyor Interface for bar feeder 15 bar high pressure pump

turning diameter: 870 mmturning length: 3000 mmcontrol: Siemens type: 810 mmbed width: 620 mmturning diameter over slide: 560 mm3 jaw chuck Forckrath: 630 mmtype: 3KTN 630 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 210 mm, 305 mm, 5000 1/min

CNC Lathe Make: Gildemeister Model: CTX 200 Control: Heidenhain Pilot 1190 Year of manufacture 1996 Switch-on hours: approx. 38,000 h Specifications Circumferential diameter over bed 440 mm Circumferential diameter over carriage 210 mm Turning length 305 mm Bar passage 42 mm Speed 5000 rpm Turret 12 stations Tool holder 20 VDI Machine dimensions L x W x H 2800 x 1651 x 1771 mm Machine weight approx. 3000 kg Accessories: Various tool holders Collet chuck on main spindle Tailstock Documentation

turning diameter: 420 mmturning length: 1000 mmcontrol: Fanuc 10 T Monforts Control Fspindle passage: 65 mmturning speeds: 4000 U/minchip conveyor: Tool turret 12 positions: total power requirement: 22 kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc 21T Turning diameter 158 mm Circumferential diameter over bed 340 mm Speed 6,000 min-1 8-speed revolver Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Versatile tool holders

turning diameter: 570 mmturning length: 1000 mmcontrol: Sinumerik 805 Siemensclamping length: ca 1200 mmgreates pass round over bed: 570 mmswing diameter over face slide: 365 mmturning speed range - main spindle: 3 - 2.500 min/-1power capacity - main spindel: 15 / 19 kWspindle bore: 62 mmspindle head: DIN 55027 No. 8diameter of quill: 80 mmtaper of center: MK 5 quill stroke: 190 mmtotal power requirement: 40 kVAweight of the machine ca.: 5,6 tLathe cycle controled- SIEMENS Sinumerik 805 / Simeodrive 611- 4-Jaw Chuck, Handwheel, Covering- Chip Tray & coolant- adjustable feet- approx 20 tool holders2021 Electrics/controls check by BoehringerThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter 400 mm Turning lenght 800 mm Spindle speed 4000 rpm With C axis Controller Siemens 840D

turning diameter: 220 mmturning length: 200 mmcontrol: Siemens Sinumerik total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DAEWOO LYNX 200B LATHE with FANUC control system

turning diameter: 440 mmturning length: 1500 mmcontrol: C 200 Tool changer: 16 3 jaw chuck Forckrath: 500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Fanuc Turning diameter ... 380mm Axis X ... 151mm Axis Z ... 339mm Circumferential diameter via support ... 290mm Spindle speed ... 20-6000 rpm. Machine weight ... 4200kg Main engine power ... 7.5kW L x W x H ... 2885/3865x1720x1670mm The machine is in good condition, possible to test under power.

turning diameter: 400 mmturning length: 600 mmcontrol: swing diameter: 600 mmspindle bore: 73 mmchip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

turning diameter: 290 mmturning length: 850 mmswing diameter: 600 mmcontrol: Siemens type: 840 D mmspindle passage: 103 mmturning speeds: 3000 U/minlive tooling: 3000 U/minrapid travel - grinding spindle: 25 m/mintotal power requirement: 65 kWweight of the machine ca.: 11 tdimensions of the machine ca.: mOffer price without toolsOptionally, the accessories can also be purchased: 106 steel holders for indoor and outdoor use.External machining, 20driven tools(including 10 x angle tools) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max Turning diameter 480 mm Max Turning lenght 790 mm Main spindle speed 2800 rpm Sub spindle speed 4500 rpm Main spindle power 22 kw With 4 pieces life tool

turning diameter: 302 mmturning length: 600 mmcontrol: Siemens type: 810 T tail stock: Tool changer: 12 Pos.tool taper: VDI 30 chip conveyor: 3-jaw-chuck diameter: 200 mmswing diameter: 400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 370 mm, 650 mm, 3500 1/min

Machine Details Stock-No. 1105-04067 Type of machine CNC Lathe Make DAEWOO Type PUMA 250 B Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Corea Delivery time to be agreed Freight basis ex Site Technical details turning diameter 370 mm turning length 648 mm control Fanuc 18 t bar diameter 77 mm swing dia. 570 mm swing diameter over cross slide guide 255 mm max. turning diameter 255 mm drive capacity - spindle motor 18.5/22 kW turning speeds 3500 rpm Turret (X-Stations) 10 pos. JAPAN rapid traverse X-axis 24 m/min total power requirement 32 kW weight of the machine approx. 6 t dimensions of the machine approx. 3.43 X 1.85 X 2 m Additional information GOOD MACHINE WITH CNC FANUC 21 IT 3 JAW CHUCK DIA 250 MM SCHIP CONVoYEUR TOOL SETTER COOLANT INTERLOKED GUARDS

turning diameter: 630 mmturning length: 2000 mmcontrol: Zyklen gesteuert steady: 2 Stk.total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Manufacturer: Spinner Type: SB-CNC Year of Make: 1998 Control: Siemens 840D Travels: X 250 mm Z 285 mm Switch-on hours: 32,156 h Main spindle: Spindle speed: 5,000 rpm Spindle passage: 42 mm Tool holder: Tool holder: Multifix A on linear beam Dimensions and weight Dimensions: 2,100 mm x 800 mm x 1,600 mm Weight: approx. 1,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Collet chuck Interface for bar feeders The machine has a headstock elevation of 10 mm.

Inv. Num. : 8314 Type: 42 BNA DHY Producer: Miyano Created: 2011 Parameters: Max. turning length: 235 mm Max. turning diameter: 80 mm Maximum spindle speed: 6000 1/min Max. rod diameter: 42 mm Weight: 3900 kg Equipment: IEMCA Bar Feeder

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

Twin Turret Twin spindle type CNC Lathe Control Unit: Siemens 840 D Turning diameter: 140 mm Turning length: 480 mm Distance main-spindle - subspindle: 720 mm Main spindle hole diameter 42 mm Turret type: 12 station with VDI25 tool holder

Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart

Key data: 65 mm

CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.